Manualios.com

Kramer WP-20 Operation & User’s Manual

Kramer WP-20 Manual Online:

3.9, 2602 votes
Kramer WP-20 User Manual
Kramer WP-20 User Guide
Kramer WP-20 Online Manual

Text of Kramer WP-20 User Guide:

  • Kramer WP-20, 70 WP-20 - Protocol 3000 12.3.6.5 NET-MAC Functions Permission Transparency Set: - - - Get: NET-MAC? End User Public Description Syntax Set: - - Get: Get MAC address #NET-MAC?CR Response ~nn@NET-MACSP mac_address CR LF Parameters mac_address – unique MAC address. Format: XX-XX-XX-XX-XX-XX where X is hex digit Response Triggers Notes K-Config Example “#NET-MAC?”,0x0D 12.3.6.6 NET-MASK Functions Permission Transparency Set: NET-MASK Administrator Public Get: NET-MASK? End User Public Description Syntax Set: Set subnet mask

  • Kramer WP-20, WP-20 - Protocol 3000 45 12.3.1.2 BUILD-DATE Functions Permission Transparency Set: - - - Get: BUILD-DATE? End User Public Description Syntax Set: - - Get: Get device build date #BUILD-DATE?CR Response ~nn@BUILD-DATESP date SP time CR LF Parameters date – Format: YYYY/MM/DD where YYYY = Year, MM = Month, DD = Day time – Format: hh:mm:ss where hh = hours, mm = minutes, ss = seconds Response Triggers Notes K-Config Example “#BUILD-DATE?”,0x0D

  • Kramer WP-20, 32 WP-20 - Operating the WP-20 Remotely Using the Embedded Web Pages 9.8 The About Us Page The WP-20 About Us page displays the Web page version and Kramer Electronics Ltd company details. Figure 17: The About Us Page

  • Kramer WP-20, Figure 3: WP-20 Wall Plate Rear Panel Figure 4: WP-20E Wall Plate Rear Panel Figure 5: WP-20 Wall Plate Rear Panel 8 WP-20 – Defining the WP-20 Wall Plate

  • Kramer WP-20, 42 WP-20 - Protocol 3000 A string can contain more than one command. Commands are separated by a pipe (|) character. The maximum string length is 64 characters. • Message starting character:  # – For host command/query  ~ – For device response • Device address – K-NET Device ID followed by @ (optional, K-NET only) • Query sign – ? follows some commands to define a query request • Message closing character:  CR – Carriage return for host messages (ASCII 13)  CR LF – Carriage return for device messages (ASCII 13) and line-feed (ASCII 10) • Command chain separator character – Multiple com

  • 36 WP-20 - Default EDID 11 Default EDID Each input on the WP-20 is loaded with a factory default EDID. 11.1 HDMI Monitor Model name............... WP-20 Manufacturer............. KMR Plug and Play ID......... KMR1200 Serial number............ n/a Manufacture date......... 2015, ISO week 255 Filter driver............ None -----------------------

  • Kramer WP-20, WP-20 – Contents i Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Safety Instructions DC 2 2.3 Shielded Twisted Pair/Unshielded Twisted Pair 3 2.4 Recycling Kramer Products 3 3 Overview 4 3.1 About HDBaseT™ Technology 5 4 Defining the WP-20 Wall Plate 6 5 Connecting the WP-20 10 5.1 Connecting the Remote Control Switches 12 5.2 Wiring the RJ-45 Connectors 13 6 Principles of Operation 14 6.1 Input Selection 14 6.2 Signal Loss and Unplugge

  • Kramer WP-20, WP-20 - Operating the WP-20 Remotely Using the Embedded Web Pages 31 Note: The display is not updated automatically when the status of an EDID changes on the device caused by outputs being exchanged. Click Refresh to update the display, (see item 12 in the following table). Item Description Read from Section DEFAULT EDID button Click to read the default EDID Output 1 button Click to read the EDID from output 1 Input 1 button Click to read the EDID from input 1 (HDMI) Input 2 button Click to read the EDID from input 2 (VGA) BROWSE button Click to open the file browser to select an EDID file on your computer Short Summary Information S

  • Kramer WP-20, 62 WP-20 - Protocol 3000 12.3.4 Video Commands Command Description VGA-PHASE Set/get ADC (VGA) sampling phase VMUTE Set/get video on output mute 12.3.4.1 VGA-PHASE Functions Permission Transparency Set: VGA-PHASE End User Public Get: VGA-PHASE? End User Public Description Syntax Set: Set ADC (VGA) sampling phase #VGA-PHASESP channel,value CR Get: Get ADC (VGA) sampling phase #VGA-PHASE?SPchannelCR Response ~nn@VGA-PHASESP channel,value CR LF Parameters

  • Kramer WP-20, WP-20 - Technical Specifications 33 10 Technical Specifications INPUTS: Video: 1 HDMI on an HDMI connector 1 VGA on a 15-pin HD (F) connector Audio: 1 Unbalanced stereo audio on a 3.5mm mini jack OUTPUTS: 1 HDBaseT on an RJ-45 connector 1 Unbalanced stereo audio on a 3.5mm mini jack PORTS: 1 RS-232 3-pin terminal block 1 Ethernet on an RJ-45 connector CONTROLS: Remote switches for input switching and volume control, reset switch STANDARDS: HDMI with Deep Color, x.v.Color™ and 3D HDCP—works with sources that support HDCP repeater mode HDBT certified MAXIMUM

  • Kramer WP-20, WP-20 - Protocol 3000 55 12.3.1.8 NAME Functions Permission Transparency Set: NAME Administrator Public Get: NAME? End User Public Description Syntax Set: Set machine (DNS) name #NAMESP machine_name CR Get: Get machine (DNS) name #NAME?CR Response Set: ~nn@ NAME SPmachine_nameCR LF Get: ~nn@NAME?SP machine_name CR LF Parameters machine_name - String of up to 14 alpha-numeric characters (can include hyphens but not at the beginning or end) Response Triggers Notes The machine name is not the same as the model name. The machine name is used to identify a specific machine or a network in use (wit

  • WP-20 - Protocol 3000 69 12.3.6.3 NET-GATE Functions Permission Transparency Set: NET-GATE Administrator Public Get: NET-GATE? End User Public Description Syntax Set: Set gateway IP #NET-GATESP ip_address CR Get: Get gateway IP #NET-GATE?CR Response ~nn@NET-GATESP ip_address CR LF Parameters ip_address –

  • Kramer WP-20, ii WP-20 - Contents Figures Figure 1: WP-20 Wall Plate Front Panel 6 Figure 2: WP-20E Wall Plate Front Panel 6 Figure 3: WP-20 Wall Plate Rear Panel 8 Figure 4: WP-20E Wall Plate Rear Panel 8 Figure 5: WP-20 Wall Plate Rear Panel 8 Figure 6: Connecting the WP-20 Wall Plate 10 Figure 7: Remote Switches Terminal Block 12 Figure 8: The Configuration DIP-switch 19 Figure 9: Entering Logon Credentials 22 Figure 10: The Default Page 22 Figure 11: The Main Switching Page 23 Figure 12: The Switching Page 25 F

  • Kramer WP-20, WP-20 - Protocol 3000 67 12.3.6 Communication Commands Command Description ETH-PORT Set/get Ethernet port protocol NET-DHCP Set/get DHCP mode NET-GATE Set/get gateway IP NET-IP Set/get IP address NET-MAC Get MAC address NET-MASK Set/get subnet mask 12.3.6.1 ETH-PORT Functions Permission Transparency Set: ETH-PORT Administrator Public Get: ETH-PORT? End User Public Description Syntax Set: Set Ethernet port protocol #ETH-PORTSP portType,ETHPort CR Get: Get Ethernet port protocol #ETH-PORT?SP portType CR Response ~

  • Kramer WP-20, WP-20 - Protocol 3000 71 12.3.7 EDID Handling Commands Additional EDID data functions can be performed via the WP-20 Web pages or a compatible EDID management application, such as Kramer EDID Designer (see http://www.kramerav.com/product/EDID%20Designer ). Command Description CPEDID Copy EDID data from the output to the input EEPROM LOCK-EDID Lock last read EDID 12.3.7.1 CPEDID Functions Permission Transparency Set: CPEDID End User Public Get: - - - Description Syntax Se

  • Kramer WP-20, WP-20 - Default EDID 39 1280 x 960p at 60Hz - VESA STD Report information Date generated........... 28/11/2017 Software revision........ 2.90.0.1020 Data source.............. Real-time 0x0021 Operating system......... 6.1.7601.2.Service Pack 1 Raw data 00,FF,FF,FF,FF,FF,FF,00,2D,B2,00,12,00,00,00,00,FF,19,01,03,6E,34,20,78,EE,B3,25,AC,51,30,B4,26, 10,50,54,FF,FF,80,81,8F,81,99,A9,40,61,59,45,59,31,59,71,4A,81,40,01,1D,00,72,51,D0,1E,20,6E,28, 55,00,07,44,21,00,00,1E,00,00,00,FD,00,38,4C,1E,53,11,00,0A,20,20,20,20,20,20,00,00,00,FC,00,57, 50,2D,32

  • Kramer WP-20, 20 WP-20 - Configuring the WP-20 8.2 Video Switching Timeouts When the WP-20 is configured for auto switching, the timeouts, before a new input is automatically selected, can be changed as shown in the table below. (For the delay settings on the Web page, see Section 9.4 .) Timeout Minimum Timeout Default Timeout Delay switching upon signal loss (signal off, 5V power on) 5 seconds 10 seconds Delay switching upon cable unplug (signal off, power off) 0 seconds 0 seconds Delay 5V power off upon signal loss (delay must be greater than “Delay switching upon signal loss”) 5 seconds 900 seconds Note: For audio auto-

  • 1 REMOTE 5-pin Terminal Block Connect to the remote, contact-closure switches for remote control, (see Section 5.1) 2 OPTION 4-way DIP-switch Switches for setting the device behavior, (see Section 8.1) 3 CONTROL 3-pin Terminal Block Connect to the serial controller to control the WP-20, (for example, a PC) 4 AUDIO OUT 3-pin Terminal Block Connec

  • Kramer WP-20, WP-20 – Defining the WP-20 Wall Plate 7 Figure 3 and Figure 4 define the rear panels of the WP-20 and WP-20E. # Feature Function 1 HDMI LED When HDMI is selected: • Lights orange when external audio is selected • Lights green when embedded audio is selected • When HDMI is not selected the LED does not light 2 PC Graphics LED When PC input is selected: • Lights orange when external audio is selected. • Lights green when there is no audio • When the PC input is not selected the LED does not light 3 ON LED The LED indicates the following: • Lights green—power is provided by a power adapter • Lig

  • Kramer WP-20, 4 Defining the WP-20 Wall Plate Figure 1 and Figure 2 define the front panels of the WP-20 and the WP-20E. Figure 1: WP-20 Wall Plate Front Panel Figure 2: WP-20E Wall Plate Front Panel 6 WP-20 – Defining the WP-20 Wall Plate

  • Kramer WP-20, WP-20 – Getting Started 3 2.3 Shielded Twisted Pair/Unshielded Twisted Pair Kramer engineers have developed special twisted pair cables to best match our digital twisted pair products; the Kramer BC-HDKat6a (CAT 6 23 AWG) HDBaseT certified, and the Kramer BC-DGKat7a23 (CAT 7a 23 AWG) cables. These specially built cables significantly outperform regular CAT 6 and CAT 7a cables. 2.4 Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled. To compl

  • Kramer WP-20, 54 WP-20 - Protocol 3000 12.3.1.7 HDCP-STAT Functions Permission Transparency Set: - - - Get: HDCP-STAT? End User Public Description Syntax Set: - - Get: Get HDCP signal status #HDCP-STAT?SP stage,stage_id CR Response ~ nn@HDCP-STATSP stage,stage_id,mode CR LF Parameters stage – 0 (input), 1 (output) stage_id – for input stage: 1 (HDMI In 1), 2 (HDMI In 2), 3 (PC In), for output stage: 1 (HDBT Out) actual_status – signal encryption status: 0 (On), 1 (Off) Response Triggers A response is sent to the com port from which the Get comma

  • 72 WP-20 - Protocol 3000 12.3.7.2 LOCK-EDID Functions Permission Transparency Set: LOCK-EDID End User End User Get: LOCK-EDID? End User End User Description Syntax Set: Lock last read EDID #LOCK-EDIDSP input_id,lock_mode CR Get : Get EDID lock state #LOCK-EDID?SPinput_idCR Response ~nn@LOCK-EDIDSP input_id,lock_mode CR L

  • Kramer WP-20, WP-20 - Operating the WP-20 Remotely Using the Embedded Web Pages 25 9.2 The Switching Page The Switching page lets you select a video input manually and adjust the audio volume. Figure 12: The Switching Page Item Description Live Signal Indicator Indicates whether or not there is a live signal on either of the inputs HDMI Button Click to select the HDMI input VGA Button Click to select the VGA input Audio source Indicator Indicates the source of the audio that is transmitted on the output Volume Slider Click and slide up and down to increase or decrease the audio output volume Mute Button Click to mute or unmute the output audio

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 ASCOM NIS - BROCHURE 1 Brochure ascom/nis-brochure-1-T7X.pdf 12 Feb 2023 8 6.44 Mb
2 Company Seven Televue NP127is Operating manual company-seven/televue-np127is-E8Z.pdf 01 Jan 2024 11
3 Lenovo ThinkPad L412 Setup manual lenovo/thinkpad-l412-8TB.pdf 24 Feb 2024 2
4 Canon PIXMA Pro9000 Mark II Specifications canon/pixma-pro9000-mark-ii-92V.pdf 04 Jul 2022 2 0.01 Mb
5 Delphi NA10000 Quick start manual delphi/na10000-MLU.pdf 07 Mar 2023 12 0.17 Mb
6 SHOWTEC Explorer 250 Wash Operation & user’s manual showtec/explorer-250-wash-JJ3.pdf 16 Feb 2023 24

Similar Resources:

  • A3 Smart Home

    Qolsys IQ Panel 2

    (177 pages)
    The Qolsys IQ Panel 2 & IQ Panel 2+ is a 7” touchscreen built with an Android operating system, providing full security and smart home functionality in an easy to use interface.Qolsys IQ Panel 2/2+ Software Version 2.5.0INSTALLATION MANUAL …
  • TP-Link

    TL-PA4015P

    (75 pages)
    7106508085 REV2.2.0TP-Link Technologies Co., Ltd.Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.No part of the specifications may be reproduced in any form or by any means or used to make …
  • CARLO GAVAZZI

    SH2WEB24

    (2 pages)
    SH2WEB24, SB2WEB24Instruction ManualMANUAL SH2WEB24, SB2WEB24 code 80217.. / ....17 http://www.carlogavazzi.com/ CARLO GAVAZZIENGLISHRead carefully the instruction manual. If the instrument is used in a manner not specified by the producer, the protection provided by the instrument may be impaired. Maintenance: make sure that the connections are corre …
  • Eldat

    RTS26

    (2 pages)
    GBRadio Window Handle Contact RTS26 ModelRTS26-5001E-01 868.3 MHz Technical DetailsFrequency: 868.3 MHzModulation: FSKCoding: EasywavePower supply: 1x 3-V-battery, CR2032Degree of protection: IP20Operatingtemperature: -20 °C to +60 °CRange: free-field: approx. 150 mDimensions: 33x166x8 mmWeight: 34 g (incl. battery) Function Scope …
  • SOMFY

    Nina Timer io

    (102 pages)
    1CONTENTSManualRef. 5129414AWELCOME 21. SAFETY 32. NINA IO TIMER REMOTE CONTROL 53. USING NINA TIMER IO 16Control a device 17My function 18Natural Control function 22Launch a scenario 26Alarm function 27Timer function 29Create typical days 34Programme the week 50View programmed actions 534. CUSTOMIZING NINA TIMER IO 60Customize devices 60Cus …
  • Elko

    RFSA-62B

    (6 pages)
    RFSA-62BWireless switch unitEN02-54/2016 Rev.5Made in Czech Republic1/6☺☺☺☺RFRP-20☺Characteristics /• The switching unit with 2 output channels is used for controlling appliances and light circuits.• They can be combined with detectors, controllers, iNELS RF Control or system components.• The BOX design lets you mount it right in an inst …

Comments, Questions and Opinions: