Manualios.com

Nearus NU-350-USB2PTZ-B Manual 

Nearus NU-350-USB2PTZ-B Manual Online:

3.45, 1933 votes
Nearus NU-350-USB2PTZ-B User Manual
Nearus NU-350-USB2PTZ-B User Guide
Nearus NU-350-USB2PTZ-B Online Manual

Text of Nearus NU-350-USB2PTZ-B User Guide:

  • Product Manual | NU-350-USB2PTZ-B Page 2 | Safety Tips Please read this manual carefully before installing the camera. Keep the camera away from violent vibration, physical stress, moisture, extreme temperatures, and excess lighting. Install the camera in a safe location where it is unlikely to be damaged. Use the specified voltage only. Excessive voltage can result in fire

  • Nearus NU-350-USB2PTZ-B, Product Manual | NU-350-USB2PTZ-B | Page 3 Installation Best Practices For conference rooms where the audience sits around a table, install the camera below the display, at eye level for the seated participants. For larger training rooms or class- rooms, mount it above or beside the display. Typical mounting height for conference rooms is 30–65 inches above floor level. Proper lighting is crucial for image quality. Avoid backlighting (especially from outside windows) and supply proper foreground lighting. Have the electrical or general contractor install a double gang junction box at the desired camera height. Wall Mount Installation Install a doub

  • Nearus NU-350-USB2PTZ-B, Product Manual | NU-350-USB2PTZ-B Page 4 | Setting Presets To set up preset positions, press the preset number then press the desired action. To Set: Adjust the camera to the desired view. Press the preset number, then Set. To Call: Press the preset number, then Call. To Clear: Press the preset number, then Clear. Optional Software Install The camera is suitable for use with all major videoconfer- encing software. It supports most features of those systems and provides far-end PTZ control. If you need software, the Nearus Camera Control Software is available on the Support tab of the product page. To install and use this software, connect your local laptop to th

  • Product Manual | NU-350-USB2PTZ-B | Page 5 Basic Functionality Features not described here are intended for future capa- bilities. Pan Area  Pan and tilt the camera using the directional buttons. Adjust the speed of the camera’s movement by setting the slider to the desired speed. Lens Area  To zoom in, press Tele. To zoom out, press Wide. To adjust the focus, press Far or N

  • Nearus NU-350-USB2PTZ-B, Product Manual | NU-350-USB2PTZ-B Page 6 | Hardware Anatomy Camera Anatomy  IR receiver  USB 2.0 input  VISCA, RS-232C, RS-485 input  RS-485 output  DC12V 1.2A power input socket VISCA to RS-232C IN Connector Anatomy To control the camera via RS-232 or RS-485, match the controlling pins to the pins on the provided VISCA cable. RS-232 IN Pinout Chart Use VISCA protocol @ 9600 baud. Pin # Function 1 DTR In 2 DSR In 3 TXD In 4 GND 5 RXD In 6 GND 7 IR Commander Signal Output 8 N /A RS-485 OUT Pinout Chart Use PELCO-D protocol @ 38400 baud. Pin # Function 1 Data Transmission Ready Out 2 Data Set Ready Out 3 Transmit Data Out 4 Ground 5 Receive Dat

  • Nearus NU-350-USB2PTZ-B, Product Manual | NU-350-USB2PTZ-B | Page 7 Remote Control Functions Remote Control Functions Reset Restarts the camera with the default factory settings. Power Turns the camera on or o. Camera Select Chooses which camera IR range the remote functions on. Presets Keypad Set Press “Set” to define a preset position. Presets Keypad Call Enter a preset number and press “Call” to move the camera Presets Keypad Clear Enter a preset number and press “Clear” to delete a preset Zoom Fa

  • Nearus NU-350-USB2PTZ-B, Product Manual | NU-350-USB2PTZ-B Page 8 | Common Hex Commands Power On 81 01 04 00 02 FF Preset 1 Set 81 01 04 3F 01 01 FF Power O 81 01 04 00 03 FF Preset 1 Call 81 01 04 3F 02 01 FF Pan Up (slow) 81 01 06 01 03 03 03 01 FF Preset 2 Set 81 01 04 3F 01 02 FF Pan Up (fast) 81 01 06 01 09 09 03 01 FF Preset 2 Call 81 01 04 3F 02 02 FF Pan Down (slow) 81 01 06 01 03 03 03 02 FF Preset 3 Set 81 01 04 3F 01 03 FF Pan Down (fast) 81 01 06 01 09 09 03 02 FF Preset 3 Call 81 01 04 3F 02 03 FF Pan Left (slow) 81 01 06 01 03 03 01 03 FF Preset 4 Set 81 01 04 3F 01 04 FF Pan Left (fast) 81 01 09 01 09 09 01 03 FF Prese

  • Nearus NU-350-USB2PTZ-B, Product Manual | NU-350-USB2PTZ-B | Page 9 Troubleshooting The computer does not recognize the camera: • Possibility 1: The UVC driver did not load properly. Unplug the camera, restart the computer and let it boot up fully, then plug camera back into the computer and wait for drivers to load. • Possibility 2: No UVC driver was available for download. Go to Device Manager, right-click the camera under “Other Devices”, and select uninstall. Right-click again, and select “Scan for Hardware Changes” to reload the driver. The remote isn’t working: • The “Camera Select” setting on the remote does not match the “IR Select” switch n

  • Nearus NU-350-USB2PTZ-B, Product Manual | NU-350-USB2PTZ-B Page 10 | Specifications Image Sensor 1/3” Color CMOS, 1.3 Megapixels Minimum Scene Illumination 0.1 Lux at f1.2 White Balance Auto Gain Control Auto Backlight Compensation Manual Focus 4.9–49mm Auto Focus Iris Auto Zoom 10 X Optical Zoom Video Output USB 2.0, MJPEG Video Format 1080p @ 30Hz IR Control Front & Rear Sensors Communication EIA/RS-232, EIA/RS-485, (both bidirectional) PTZ Control Protocol PELCO-D Baud 9600 / 38400 bps Presets 64 Save Status after Power O Yes Pan Speed 1–120�

  • Nearus NU-350-USB2PTZ-B, Product Manual | NU-350-USB2PTZ-B | Page 11 Support Need Help? Contact Tech Support! If you need further clarification, please email [email protected]. For more information, instructional videos, support documentation, or ideas, visit our website and view your item’s product page. 1-Year Limited Warranty This Nearus™ product has a 1-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have been abused, modified or disassembled. Products to be repaired under

Related Products and Documents (Webcam):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Line 6 POD 2.0 - FEATURES Upgrade manual line-6/pod-2-0-features-NY3.pdf 18 Sep 2023 22
2 JBL SCS150SI Owner's manual jbl/scs150si-9J3.pdf 09 Apr 2023 12
3 ActionTec HPAP108T Operation & user’s manual actiontec/hpap108t-I9Z.pdf 07 Sep 2023 69 4.06 Mb
4 Amana UXT5530AA Installation manual amana/uxt5530aa-4S9.pdf 19 Feb 2024 2 0.09 Mb
5 Ford 2000 Expedition Owner's manual ford/2000-expedition-951.pdf 11 Oct 2022 256 2.18 Mb
6 Melissa 670-052 Operation & user’s manual melissa/670-052-ZS8.pdf 18 Jun 2022 17

Similar Resources:

  • Canon

    Vb-C60 - Ptz Network Camera

    (2 pages)
    VB-C60VB-C60PAN/TILT/ZOOM NETWORK CAMERAPAN/TILT/ZOOM NETWORK CAMERA40x (maximum) zoomSmart Shade ControlOriginalProgressive ScanInterlaced Scan1x wide angleAuto FocusViewer &Admin ToolsHorizontalViewing Angle70° HorizontalViewing Angle31 . 0x26DIGIC NETProcessorOptical26x ZoomSensor &Alarm TriggerSmart ShadeControlSimultaneousDataDistributionMulti- …
  • Polycom

    VSX3000

    (2 pages)
    www.polycom.comPolycom®VSX™3000 VantaggiIntegrazione completa - Questo sistemadi videoconferenza all-in-one comprendeuna videocamera, un monitor, altoparlantistereo e microfoniVisualizzazione polivalente - Lo schermopiatto LCD 17" può servire da monitor PC adalta risoluzioneGrande qualità e massima fedeltàaudio - In configurazione bicanale Siren� …
  • Syscom Video

    Full-HD IR Bullet Network Camera

    (65 pages)
    INSTRUCTION MANUAL Full-HD IR BulletNetwork Camera Please read this manual thoroughly before use, and keep it handy for future reference. …
  • Toshiba

    TLP-C001 - Document Camera

    (1 pages)
    Toshiba TLP-C001 Document Camera SpecificationsModel Name TLP-C001Image Sensor 1/2" CMOS 3M PixelsEffective Pixel 1024H x 768V (XGA)Mechanical Arm 22" GooseneckDimensions (L x W x H)Base Unit 5.6" x 2.2" x 8.8"Camear Head 4.8" x 2.3" x 2.4"Weight4 lbs.Optical LensFocal Length 9.6mmMinimum Focal Range 0.10m (3.9")V …
  • Sandberg

    NightCam

    (32 pages)
    [133-31] Rev. 11.10.04 Sandberg NightCam System requirements • Pentium PC 300 MHz or compatible • 64MB SDRAM or above • 1 available USB port • CD-ROM drive or Internet connection DANSK NORSK SVENSKA SUOMEN ENGLISH …
  • SWEEX

    100K

    (2 pages)
    English versionWWW.SWEEX.COMEnglish versionSweex Mini WebCamNB: Before connecting your USB camera, first install the CD-ROM.AdvantagesFlexible Mounting - Connect the camera to your notebook in no time at all.Easy to install - After inserting the CD-ROM the software installation is completed almost entirely automatically and then connect the Sweex USB webcam …

Comments, Questions and Opinions: