Cisco Smart+Connected Remote 250 Reference Manual
|
Cisco Smart+Connected Remote 250, Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Cisco Smart+Connected Remote 250 Reference Guide This document includes the following information about the Cisco Smart+Connected Remote 250: • Introduction, page 2 • Install and Maintain the Disposable the Batteries, page 3 • Install and Use the Optional Recharging Kit, page 4 • Configure the Remote Control, page 11 • Program Remote Paging, page 13 • Resetting the Device to Factory Settings
Cisco Smart+Connected Remote 250, 2 Cisco Smart+Connected Remote 250 Reference Guide OL-27366-02 Introduction Introduction The Cisco Smart+Connected Remote 250 (SCH-REMOTE-250) allows residents to control automation features and manage their personal audio and video equipment from anywhere in the residence. The Cisco Remote 250 is used with an on-screen navigator (such as a television) and includes an LED display for complete residential control using only the remote. The Cisco Remote 250 provides wireless connectivity of any intelligent device from anywhere in the residence. Line of sight is not required the—remote does not have to be p
3 Cisco Smart+Connected Remote 250 Reference Guide OL-27366-02 Install and Maintain the Disposable the Batteries Install and Maintain the Disposable the Batteries Install the Batteries Install the four (4) AA batteries (included) into the back of the Cisco Remote 250. Insert them according to the diagram provided in the battery compartment (with the + and
Cisco Smart+Connected Remote 250, 4 Cisco Smart+Connected Remote 250 Reference Guide OL-27366-02 Install and Use the Optional Recharging Kit Install and Use the Optional Recharging Kit An optional Cisco Remote Charging Station with a rechargeable battery is available to ensure a fully charged battery at all times. If the battery level drops, simply place the remote in the station until the remote is fully charged and ready to use again. These items are purchased seperatly. See the following for more information: • Ordering Information, page 5 • What’s in the Box?, page 5 • Installing the Remote Charging Kit, page 5 • Recharging Station Lights, page 10 • Set Up Yo
5 Cisco Smart+Connected Remote 250 Reference Guide OL-27366-02 Install and Use the Optional Recharging Kit Ordering Information Ta b l e 1 Cisco Smart+Connected Remote 150 Recharging Kit Product Name Part Number Cisco Smart+Connected Remote 250 Recharging Kit Note The Recharging Kit includes a charging station, rechargeable battery and new back cover
Cisco Smart+Connected Remote 250, 6 Cisco Smart+Connected Remote 250 Reference Guide OL-27366-02 Install and Use the Optional Recharging Kit Procedure Step 1 Remove the old batteries from your new or existing remote. a. Turn the remote upside down. On the bottom of the remote, pull the battery cover toward you with your thumb and lift it off of the remote ( Figure 3). Figure 3 Remove the Battery Cover b. With your fingertip, pull out the old batteries (Figure 4). Figure 4 Remove the Old Batteries
Cisco Smart+Connected Remote 250, 7 Cisco Smart+Connected Remote 250 Reference Guide OL-27366-02 Install and Use the Optional Recharging Kit Step 2 Insert the rechargeable battery into your new or existing remote. a. On the bottom of the remote (with the cover off and the old batteries taken out), insert the rechargeable battery by sliding the small end into the slot first (Figure 3). Note the orientation of + and - symbols for proper battery insertion ( Figure 5). Figure 5 Rechargable Battery b. Seat the battery securely into the slot and push down (Figure 6). Figure 6 Battery Installed Step 3 Place the new cover on your existing remote. If
Cisco Smart+Connected Remote 250, 8 Cisco Smart+Connected Remote 250 Reference Guide OL-27366-02 Install and Use the Optional Recharging Kit Figure 7 Replace the Cover b. Slide the battery cover into the slot and then push down until the cover is horizontal. Slide the cover into the slot until it snaps into place. Step 4 Attach the power supply to your recharging station This section applies to recharging stations for existing or new remotes. a. Insert the small end of the USB cable into the back of the recharging station (inside the indentation) and thread the power cord through the indentation in the station ( Figure 8). Note You can thread the cord straight out or wind it around to the opposite end of th
9 Cisco Smart+Connected Remote 250 Reference Guide OL-27366-02 Install and Use the Optional Recharging Kit c. Insert the power plug into a power outlet to begin recharging. d. For convenience, place the recharging station close to where you use your remote. Step 5 Set the charging indicator on your recharging station This section applies to recharging stations for existing or new remote
Cisco Smart+Connected Remote 250, 10 Cisco Smart+Connected Remote 250 Reference Guide OL-27366-02 Install and Use the Optional Recharging Kit Figure 10 Ensure Proper Installation Recharging Station Lights This section applies to recharging stations for existing or new remotes. Depending on the Charging Indicator brightness you select, the indicator light will be High or Low brightness or Black/Off. When your recharging station is on, you may see the following lights. • Red—The remote is recharging, and is not fully charged yet. • Green—The remote is fully charged. • Black—The light is off. Either the Char
Cisco Smart+Connected Remote 250, 11 Cisco Smart+Connected Remote 250 Reference Guide OL-27366-02 Configure the Remote Control Cisco Remote 250 (Offline) If you have a Cisco Remote 250 that is offline, follow these steps: 1. On the remote, press List. 2. Press Config. 3. Select Recharge Station. Press Yes. Configure the Remote Control Step 1 Start Control4 Composer Pro and connect to a Director. Step 2 In the System Design view, (selected by default), select the room where the Cisco Remote will reside. Step 3 In the My Drivers tab, locate the SR-250 under the User Interface section. Step 4 Double-click SR-250 to add the device to th
12 Cisco Smart+Connected Remote 250 Reference Guide OL-27366-02 Configure the Remote Control • Watch/Listen Button Behavior—Select to start the most recently-used device. Program the Programmable Buttons On the Cisco Remote 250, you can program six (6) soft buttons (Red, Green, Yellow, Blue, *, and #) to perform programmed activities. These buttons ca
Cisco Smart+Connected Remote 250, 13 Cisco Smart+Connected Remote 250 Reference Guide OL-27366-02 Program Remote Paging Based on A/V Device • Select the System Design view. • Select an A/V device to display the device’s Properties page. • On the device’s Properties page, choose Code or Macro for the button you want to program, and then choose a code or macro from the drop-down list, edit the Help text as needed, and then choose Set. Note Help text describes custom programming to end-users under the House option in any of the Navigators. For example: Ste
Cisco Smart+Connected Remote 250, 14 Cisco Smart+Connected Remote 250 Reference Guide OL-27366-02 Resetting the Device to Factory Settings Figure 1-12 Paging • Beep until button press—The Cisco Remote beeps until you press one of its buttons. • Beep for X seconds (<254)—The Cisco Remote beeps until X seconds have elapsed, or you press one of its buttons. • Stop Beep—The Cisco Remote stops beeping. Resetting the Device to Factory Settings To reset all settings to the factory defaults and leave the ZigBee network: Press Room Off, #,*,1,3,4,1,3. Specifications Ta b l e 2 Cisco Remote 250 Spe
Cisco Smart+Connected Remote 250, 15 Cisco Smart+Connected Remote 250 Reference Guide OL-27366-02 Specifications On-screen Display TV Display On-Screen Enclosure High-Impact Molded Plastic Yes Textured Finish Yes Communications ZigBee (802.15.4) Yes Environmental Normal operating temperature 32°F to 104°F (0°C to 40°C) Storage temperature –4°F to 149°F (–20°C to 65°C) Power Requirements Batteries 4 AA Dimensions L x W x D 8.3 in. x 2.1 in. x 1.1 in. (190 mm x 55 mm x 27 mm) Weight (Including Batteries) 8.8 oz. (250 g) Optional Recharging Station Recharging Cradle ( L x W x D) 9 in. x 2.5 in. x 2.0 in. (229 mm x 64 mm x 51 mm) Battery type (included with purchase of the recharging station) L
Cisco Smart+Connected Remote 250, 16 Cisco Smart+Connected Remote 250 Reference Guide OL-27366-02 Regulatory/Safety Information Regulatory/Safety Information To review regulatory information, go to www.cisco.com/go/smartconnectedresidential/docs. Related Documentation For more information about the Cisco Smart+Connected Residential products, see the following documents and websites: Subject / Document Title Location General Product Information and Home Page www.cisco.com/go/smartconnectedresidential Data Sheets http://www.cisco.com/en/US/products/ps1244 5/products_feature_guides_list.html Cisco 1-Year Limited Hardware Warranty Terms www.cisco.com/g
Cisco Smart+Connected Remote 250, 17 Cisco Smart+Connected Remote 250 Reference Guide OL-27366-02 Warranty Note For information about third-party hardware and software, see the manufacturer’s product documentation and/or website. Warranty A Cisco 1-year warranty applies. Go to the following URL for more information: www.cisco.com/go/smartconnectedresidentialwarranty Service and Support Cisco offers a wide range of support programs to accelerate customer success. These innovative programs are delivered through a unique combination of people, processes, tools, and pa
Cisco Smart+Connected Remote 250, 18 Cisco Smart+Connected Remote 250 Reference Guide OL-27366-02 Service and Support This document is to be used in conjunction with the documents listed in the “Related Documentation” section. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R) Any Internet Protocol (IP) addresses and phone numbers used in this document are
Cisco Z8 series Remote Control Operation & user’s manual
Z8 series |
Cisco AT6420 Remote Control Operation & user’s manual
AT6420 |
Cisco TelePresence SX10 Remote Control Quick set
TelePresence SX10 |
Cisco Z22 Remote Control Operation & user’s manual
Z22 |
Cisco AT 6400 All Touch Remote Control Operation & user’s manual
AT 6400 All Touch |
Cisco TelePresence SX10 Remote Control Operation & user’s manual
TelePresence SX10 |
Cisco TelePresence SX10 Remote Control Administrator's manual
TelePresence SX10 |
Cisco TRC 5 Remote Control Quick reference manual
TRC 5 |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | VAST | DMC-1113 | Operation & user’s manual | vast/dmc-1113-KX8.pdf | 04 Feb 2024 | 17 | |
2 | Lioncast | LX16 | Operation & user’s manual | lioncast/lx16-117.pdf | 01 Aug 2022 | 16 | |
3 | Harman Kardon | MAS 101 | Service manual | harman-kardon/mas-101-22J.pdf | 01 Sep 2022 | 60 | |
4 | Craftsman | 315.17504 | Owner's manual | sears/315-17504-VU4.pdf | 09 Sep 2023 | 28 | 1.45 Mb |
5 | JabloCom | GDP-04i | Operation & user’s manual | jablocom/gdp-04i-76S.pdf | 02 Mar 2023 | 160 | |
6 | ALFRA | ROTABEST 100 RL – E | Operation manual | alfra/rotabest-100-rl-e-F95.pdf | 30 Aug 2023 | 56 |
Pixapro
This 2.4GHz Wireless Radio Remote control allows you to wirelessly control a single head unit, or multiple groups of lights simultaneously, without having to walk up to each individual light and set each one. This remote control is for use with the Pixapro® LED 100D MKIII, LED100B MKIII and LED200B MKIII LED Studio Lights. Specifications: 2. Di …
M-060006(2 pages) |
Innotech
PRELIMINARY320 Main Street Port Jefferson NY 11777 (631) 473-1500 FAX (631) 473-525941 Winter Street Boston MA 02108 (617) 695-2700 (617) 423-0466PreliminaryJuly 26, 2001INNOTECH SYSTEMS INC.IC4201/IC6201 UNIVERSAL REMOTECONTROL INTEGRATED CIRCUITSFEATURESC Incorporates Innotech's acclaimedremote control code library - IC4201 …
IC4201(7 pages) |
Paradox
EnglishMG-REM2 is a water-resistant 5-button remote control that allows the user to find out the status of their system at the press of a button. The remote control provides both auditory and visual feedback in an attractive streamlined style. The MG-REM2 is available in a 433MHz or 868MHz version. The 868MHz version is not UL approved. To activate the remot …
Magellan MG-REM2(2 pages) |
C.P. Electronics
Warning | Warnung | Advertencia | Aviso | Attention | Attenzione | WaarschuwingUHS7Compact, user handset Kompakt, Mobilteil Terminal del usuario, compacto Aparelho compacto para utilizador Télécommande compacte Telecomando per l’utente compatto Compacte afstandsbediening EN If this symbol is on the product or battery, you must dispose of the …
UHS7(4 pages) |
Qlima
REMOTE CONTROLMANUAL RG1023058862341GEBRAUCHSANWEISUNGMANUEL D’UTILISATIONUSER MANUALGEBRUIKSAANWIJZING2122232Remote-man_RG10 EU ('21) V2.indd 1Remote-man_RG10 EU ('21) V2.indd 1 16-11-2021 17:1516-11-2021 17:15
…
RG10(42 pages) |
TURBO RACING
Congratulations on your purchase of Turbo Racing 91805G-VT transmitter. Designed using advanced wireless technology, Turbo Racing 91805G-VT will advance and simplify control of your suface model and minimize interference while providing many years of enjoyment.This product is not a toy! (14+) Recommended for ages 14 and up. Adult supervision required for age …
91805G-VT(5 pages) |
Kia Automobile Rio 2001Kia Product User Guide: Rio 2001 PDF Owner's manual - 2982M7 Rio 2001, 212 |
Acer Laptop Aspire Timeline 4810TZLaptop Test report (Acer Aspire Timeline 4810TZ) Aspire Timeline 4810TZ, 12 |
ayerbe Chainsaw AY - MTS 550ayerbe AY - MTS 550 User Manual (Instruction manual), @546775 AY - MTS 550, 48 |
Victron energy Battery Charger 12/30Victron energy Battery Charger 12/30 Operation & user’s manual 12/30, 16 |
BenQ Monitor FP71e - 17" LCD MonitorFP71e - 17" LCD Monitor (Monitor ePDF Guide, #7L41HD) FP71e - 17" LCD Monitor, 37 |
Univers by FTE Receiver U4112U4112 (Receiver ePDF Guide, #R114M3) U4112, 38 |
Wyse Desktop Z90SW#L6Q5D9: Z90SW Desktop Specifications Z90SW, 20 |
KSB Water Pump S 100DKSB Water Pump Installation & operating manual (File: ksb-s-100d-installation-operating-manual-42, Thursday 28-12-2023) S 100D, 42 |
Ampire Car Alarm ZV712Ampire Car Alarm Owner's manual (File: ampire-zv712-car-alarm-8, Wednesday 20-12-2023) ZV712, 8 |
Peavey Guitar Axcelerator 5Peavey Product Guide: Axcelerator 5 PDF Operating manual - GK985D Axcelerator 5, 16 |
Snakebyte Microphone Premium universalSnakebyte Premium universal Microphone Operation & user’s manual Premium universal, 10 |