EverFocus EQ610e Operation & User’s Manual
|
EverFocus EQ610e, ED610e 19 6.13 LANGUAGE Use the LEFT & RIGHT buttons to select your language preference. The options are: ENGLISH, DEUTSCH, FRANCAIS, RUSSIAN, PORTUGUES, ESPANOL, JAPANESE, SIMPLIFIED CHINESE 6.14 CAMERA RESET To reset the camera to its default settings, scroll to this field and press ENTER. 6.15 SAVE ALL Scrolling to SAVE ALL and pressing ENTER will save all your settings without exiting the OSD. 6.16 EXIT Selecting EXIT will AUTOMATICALLY SAVE your settings and close the OSD screen.
EverFocus EQ610e, ED610e 16 Note: 1. The difference in the selected values of DAY NIGHT and NIGHTDAY should be more than 5, or else the camera will keep switching from DAY NIGHT and NIGHTDAY constantly. 2. It is not recommended to use an infrared illuminator when the camera is in DAY/NIGHT > AUTO mode. 6.9 PICTURE ADJUST To get to the PICTURE ADJUST menu item, click NEXT near the bottom of the first Main Menu (“SETUP MENU”) page. This will open the second Main Menu page (see below). To set the PICT ADJUST settings, scroll to the PICT ADJUST line and click ENTER.
EverFocus EQ610e, ED610e 8 5.2 OSD OPERATION Note: The OSD display shown in the image above is for reference only. The actual version will look different, but will have the same wording and format. 1. Open the OSD menu Press the ENTER button to open the OSD’s main menu on your screen. 2. Scroll with the cursor buttons to select menu items Use the and buttons to move the cursor up and down to scroll to the desired menu items. 3. Toggle between the right-hand options (modes) of each menu item Us
EverFocus EQ610e, ED610e 1 1. INTRODUCTION The EverFocus EQ610e box camera features an incredible 700TVL resolution in full color with a low-light sensitivity of 0.03 lux. Delivered by a 1/3” Sony 960H CCD sensor, the camera also features the added benefits of advanced Effio-E DSP technology to enhance image quality. This camera also utilizes technologies like DNR (to reduce recording file sizes and thus conserve DVR HDD space), Digital Wide Dynamic Range, True Day/Night mode switching with ICR (Infrared Cut Removable filter) module, Privacy Masking, Motion Detection, and much more! 1.1 FEATURES • 700TVL superior image
ED610e 13 PUSH Select this setting if you want the camera to automatically trace the white balance without the same range limitations that apply to ATW. USER 1 Select this mode when the color temperature is around 3200°K (when surrounded by sodium lights). Press ENTER if you want to access the setting options. Set the B-Gain and the R-Gain. USER 2 Select this mode when
EverFocus EQ610e, EverFocus Electronics Corp. EverFocus Taiwan: 12F, No.79, Sec. 1, Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886 2 2698 2334 FAX: +886 2 2698 2380 www.everfocus.com.tw [email protected] EverFocus Europe - Germany: Albert-Einstein-Strasse 1, D-46446 Emmerich, Germany TEL: +49 2822 93940 FAX: +49 2822 939495 www.everfocus.de [email protected] EverFocus China - Beijing: Room 609, Technology Trade Building, Shangdi Information Industry Base, Haidian District, Beijing 100085, China TEL: +86 10 6297 3336~39 FAX: +86 10 6297 1423 www.everfocus.com.cn marketi
EverFocus EQ610e, ED610e 11 6.3 SHUTTER / AGC (AUTO GAIN CONTROL) Once you have opened the OSD’s main menu on your screen, use the UP and DOWN buttons to scroll to the “SHUTTER / AGC” menu item. Press the LEFT and RIGHT buttons to select the MANUAL or AUTO mode. Press the ENTER button to open the selected mode’s submenu. AUTO HIGH LUMINANCE - MODE: There are two modes to select from: AUTO IRIS and SHUT+AUTO IRIS. To change the mode, highlight the MODE field and press the LEFT and RIGHT buttons to toggle between the two modes. - BRIGHTNESS : Scroll to th
EverFocus EQ610e, ED610e 2 1.3 SPECIFICATIONS Pickup Device 1/3" Sony 960H CCD Video Format NTSC, PAL Picture Elements (H x V) NTSC: 1020 x 508 PAL: 1020 x 596 Horizontal Resolution 700TVL Sensitivity 0.03Lux / F1.2 S/N Ratio Over 52dB (AGC off) Video Output 1.0Vp-p Composite, 75Ω ; BNC Gamma Correction 0.45 Lens Type C/CS Mount (Lens sold separately) Back Light HLC / BLC / OFF Auto Electronic Shutter 1/60(50) ~ 1/100,000 sec. Auto Gain Control AUTO (4 Steps) Auto White Balance ATW / Push / User1 / User2 / ANTI CR / Manual / Push Lock Sync. Mode Internal Day & Night Mode AUTO / Color / B&W / EXT1 / EXT2 OSD Menu OSD Control (English / Japanese /
ED610e 6 4. CONNECTIONS Connect the cable from the video output jack of the camera to the monitor’s input jack. 5. CAMERA SETUP OPERATIONS This camera utilizes an On Screen Display (OSD) user setup menu. 5.1 SETUP BUTTONS To set items on the user setup menu, use the following buttons on the back panel.
EverFocus EQ610e, ED610e 9 5. Return to the previous page Scroll to RETURN and press the ENTER button to return to the previous page. 6. Exit the OSD menu Scroll to EXIT and press the ENTER button to exit the OSD menu. 6. CONFIGURATION WITH THE OSD 6.1 WHITE PIXEL COMPENSATION When there are white pixels on the monitor, follow the instructions below to compensate. Press and hold the button for 5 seconds. Cover the lens and press the ENTER button as instructed. The camera will reduce the white pixels as the monit
EverFocus EQ610e, ED610e 15 AUTO The camera will switch to DAY (Color) mode or NIGHT (B&W) mode according to the selected values. • BURST: Turn the BURST function off to reduce the color noise when the camera switches to B&W mode. If the camera cannot switch back to COLOR mode from B&W mode, please turn the BURST function on. Note: The BURST function can also be switched on/off in the B&W mode’s submenu. • DELAY CNT: The Delay Count will keep the camera from unnecessarily switching between Day and Night modes when there is a sudden and short change in the light lev
EverFocus EQ610e, ED610e 12 6.4 NR (NOISE REDUCTION) 1. When the main menu is displayed on the screen, use the UP and DOWN buttons to scroll to the “NR” menu item. 2. Press ENTER to enter the NR settings submenu. Slide the bar to the left or right to adjust the Y Level. 6.5 WHITE BALANCE The screen color can be adjusted by using the WHITE BALANCE function. 1. Scroll to WHITE BALANCE on the main menu and use the LEFT and RIGHT buttons to toggle between this menu item’s seven mode options (ATW, PUSH, USER 1, USER 2, ANTI CR, MANUAL, and PUSH LOCK)
EverFocus EQ610e, ED610e 7 ① ENTER Press this button (by pressing straight down on the stick) to display the OSD’s main menu on the monitor that you have connected directly or indirectly to the camera’s video connector. Also press this button to confirm changes and to open the submenus when they’re available and selected. (Menu items with a “<┘” symbol at the end contain submenus. For adjusting submenu items, select the desired menu item with the and buttons and press the ENTER button to open the desired submenu. Use the and buttons to toggle between value options.) ② R (RIGHT) Press this button (by pressing the control stick to the
EverFocus EQ610e, EQ610e Indoor Box Camera 700TVL True Day/Night, D-WDR User’s Manual * Lens not included. Copyright © EverFocus Electronics Corp, Release Date: February, 2013
EverFocus EQ610e, ED610e 10 6.2 LENS Once you have opened the OSD’s main menu on your screen, use the UP and DOWN buttons to scroll to the “LENS” menu item. Use the LEFT and RIGHT buttons to toggle between the MANUAL and AUTO modes. If you selected AUTO, you can press the ENTER button to open the LENS > AUTO submenu (also called “Auto Iris”). TYPE This displays the type of lens used by the Auto Iris function. MODE Select the Auto Iris mode (Auto, Open, or Close). SPEED The speed of the DC l
EverFocus EQ610e, ED610e 4 2.1.3 Back Panel Back Panel: GND D/N Out D/N In Motion RS485- RS485+ 1 2 3 4 5 6 7 LINE IN 1 2 3 4 5 6 7 AC 24V / DC 12V + - 12 VDC / 24 VAC~ Model 90-260 VAC~ Model Side Panel: 1) Left-scroll button 2) Up-scroll button 3) Set button (push to activate OSD) 4) Right-scroll button 5) Down-scroll button 6) Video Output Connector BNC connector that connects to a 75 Ohm type coaxial cable to feed the video output of the camera to a color monitor or other video devices. 7) Power Input Terminal Connects to the appropriate power source. 8) Auto Iris Lens Connector This connector is used to connect to an auto iris lens via a 4 pin ma
ED610e 5 3 INSTALLATION 1. Unscrew the protection cap from the mouth of the lens mounting. 2. If a C-mount lens is to be used, please screw the C-mount adaptor ring (the 5mm-thick ring in the accessory pack) on to the mouth of the lens mounting. 3. Mount the lens by turning it clockwise on the lens mounting of the camera. 4. If you use an Auto Iris len
EverFocus EQ610e, ED610e 3 2. CAMERA OVERVIEW 2.1 NAMES AND FUNCTIONS OF PARTS 2.1.1 FRONT PANEL 2.1.2 BRACKET POSITIONS The bracket in the package can be fitted to the screw holes on the top or bottom of the camera for either suspending the camera or supporting it. Light Sensor Microphone (Reserved for Audio-supporting models) Top bracket position Bottom bracket position
EverFocus EQ610e, i CAUTIONS 1. Do not install the camera near electric or magnetic fields. 2. Never disassemble the camera beyond the recommendations in this manual nor introduce materials other than those recommended herein. 3. Try to avoid facing the camera toward the sun. 4. Keep the power cable away from water and other liquids and never touch the power cord with wet hands. 5. Never install the camera in areas exposed to oil, gas or solvents. 6. Do not operate the camera beyond the specified temperature or humidity. Use the camera at temperatures within -10°C~50°C (14°F~122°F) and humidity between 20%~ 80%; this device i
EverFocus EMN2220 IP Camera Specifications
EMN2220 |
EverFocus EDN850H IP Camera Operation & user’s manual
EDN850H |
EverFocus EAN Plus Series IP Camera Quick installation manual
EAN Plus Series |
EverFocus EZN Plus Series IP Camera Operation & user’s manual
EZN Plus Series |
EverFocus EDN850H IP Camera Installation manual
EDN850H |
EverFocus EBD935 eZ.HD Series IP Camera Operation & user’s manual
EBD935 eZ.HD Series |
EverFocus EAN800A IP Camera Specifications
EAN800A |
EverFocus EPN3600 IP Camera Specifications
EPN3600 |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Epson | EMP-52 | Specifications | epson/emp-52-15E.pdf | 05 Dec 2023 | 1 | 0.04 Mb |
2 | Viessmann | VITOCAL 200-G | Datasheet | viessmann/vitocal-200-g-RC8.pdf | 25 Apr 2023 | 16 | 1.23 Mb |
3 | Danby | DAC 8007EE | Owner's use and care manual | danby/dac-8007ee-51J.pdf | 22 Nov 2022 | 22 | 0.5 Mb |
4 | Scotsman | NM1250R | Service manual | scotsman/nm1250r-LDC.pdf | 23 Mar 2024 | 39 | 1.12 Mb |
5 | EAW | MK5399 | Specifications | eaw/mk5399-82P.pdf | 23 Jul 2023 | 2 | 0.16 Mb |
6 | Hanna Instruments | HI 38067 | Instruction manual | hanna-instruments/hi-38067-I68.pdf | 20 Nov 2022 | 2 | 0.11 Mb |
Lorex
Product InformationUser ManualsQuick Start GuidesSpecification SheetsSoftware UpgradesFirmware UpgradesVISITwww.lorexcctv.comQUICK START GUIDEwww.lorexcctv.comLorex Technologies Inc. Copyright © 2010 Lorex Technologies Inc. As our products are subject to continuous improvement, Lorex reserves the right to modify pr …
SG7530PK4(2 pages) |
Provision ISR
WWWaaattteeerrr---ppprrroooooofff IIIRRR NNNeeetttwwwooorrrkkk CCCaaammmeeerrraaa User Manual Please read this instruction carefully for correct use of the product and preserve it for reference purposes
…
I4-380IPVF(60 pages) |
VADDIO
© 2013 Vaddio - All Rights Reserved. WallVIEW HD-USB SR Camera System - Document Number 342-0465 Rev D Camera Software Revision 2.1.0 WallVIEW™ HD-USB SR System Featuring the ClearVIEW™ HD-USB PTZ Camera, CONCEAL™ Mount, Active USB Extension Cable and Power Extension Module Part Numbers: 999-6994-000 - North America 999-6994-001 - International …
WallVIEW HD-USB SR System(40 pages) |
Bosch
Video | NDN-921 FlexiDomeHD 720p Day/Night IP CameraNDN-921 FlexiDomeHD 720p Day/Night IPCamera www.boschsecurity.com u 1/3-inch Day/Night HD CCD with progressive scanu 15-bit image processing technologyu XF dynamic engine and SmartBLCu Local Storage for flexible recording optionsu Intelligence at the edgeFlexiDomeHD Day/Night IP cameras are progressivesc …
NDN-921(7 pages) |
Samsung
SmartDome CameraSCC-C6403PPart : AB68-00571A(00)EDFEsIOwner’s InstructionsBenutzerhandbuchManuel d’instructionManual del usuarioIstruzioni per l’uso00571A-SCC-C6403P-ENG 8/17/06 1:52 PM Page 1
…
SCC-C6403P(29 pages) |
i-onyx
XX181-05-00 VN-855V5 AND VN-855V5-C VN-855DNV5 AND VN-855DNV5-C VN-855WDRV5 AND VN-855WDRV5-C IP CAMERAS Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the operation will be entirely error free or perform precisely as described in the documentation. This system has not bee …
VN-855V5(38 pages) |
GE Microwave Oven SCB2000CBBGE Microwave Oven Installation instructions (File: ge-scb2000cbb-installation-instructions-3, Tuesday 19-12-2023) SCB2000CBB, 3 |
Electrolux Oven B5731-5Oven PDF Operation & user’s manual B5731-5, 68 |
FBI Security System XL-2XL-2 (Security System ePDF User Guide, #IR8EBW) XL-2, 19 |
Electric Life Automobile Accessories VK722Electric Life Automobile Accessories VK722 Installation instructions VK722, 2 |
Targus Switch USB 2.0 DVD/CD-ROM Slim External DriveUSB 2.0 DVD/CD-ROM Slim External Drive (Switch ePDF Guide, #5J5389) USB 2.0 DVD/CD-ROM Slim External Drive, 11 |
Hughes Touch terminals HN7000SHN7000S Manual - 4V6T98 HN7000S, 88 |
Cordis Medical Equipment ZEPHYRMedical Equipment #ZG391Z ZEPHYR, 2 |
Denver CD Player MC5220Denver MC5220 Manual (Doc Type: CD Player Instructions manual) MC5220, 9 |
Saturn Automobile AURA 2007AURA 2007 (Automobile ePDF User Manual, #8LOPRL) AURA 2007, 452 |
Zanussi Hob ZGS 646XZanussi Product Guide: ZGS 646X PDF Instruction booklet - 4M3BC9 ZGS 646X, 16 |
Compex Medical Equipment RunnerCompex Medical Equipment Manual (File: compex-runner-manual-139, 26th Dec 2023) Runner, 139 |
Sony Adapter SZ51-AB01#T7WFFU SZ51-AB01: Sony Adapter Owner Documentation SZ51-AB01, 6 |