Chiron Iris Touch Maintenance Manual

Text of Chiron Iris Touch User Guide:

• Chiron Iris Touch, The future of security, secured IP by security professionals, for the professional security industry Installation and Service Engineer Support Telephone: +44 871 977 1133 (Calls are charged at 10p a minute from a BT landline. Calls from mobiles or other providers may be higher) Sales Enquiries: +41 435 080 870 Email: [email protected] www.chironsc.com CHIRON SECURITY COMMUNICATIONS AG BAARERSTRASSE 19 6300 ZUG SWITZERLAND The informati

• Page 2 of 16 IRIS Touch Quick Installation & Maintenance Guide Version 1.1 Contents 1. Introduction ................................................................................................ ............................ 2. Product Features ................................................................ ................................ 3. Package Contents ...

• Chiron Iris Touch, Page 14 of 16 IRIS Touch Quick Installation & Maintenance Guide Version 1.1 8. Specifications Transmission paths 600 620 Ethernet Standard ̶ UTP 10/100 Base T with auto Connection ̶ Rj45 socket for CAT5 cabling IP addressing ̶ Dynamic (DHCP) or fixed Connection fault detection ̶ Loss of Ethernet synchronisation GPRS (3G/4G/CDMA optional on request) Standard Quad band GSM 850/900/1800/1900 MHz ̶ Connection SMA socket for GSM antenna connection ̶ Connection fault detection Loss of registration with network ̶ IP TCP ports (outbound) 53165 (Alarms & Polling), 5 1292 (Diagnostic & Reflashing), A

• Chiron Iris Touch, Page 4 of 16 IRIS Touch Quick Installation & Maintenance Guide Version 1.1 3. Package Contents Contents dependent on model type: • Dialler board • Ethernet cable (IRIS Touch 620 & 640) • GSM antenna (IRIS Touch 600 & 640) 4. Board Configuration IRIS Touch LEDS LED & Colour Indication SYS Flashing 0.5s on, 0.5s Off Shows dialler is operational SIM On Dialler is seeing the SIM card Off Dialler not currently seeing the SIM card GSM On GSM connected / registere

• Chiron Iris Touch, Page 12 of 16 IRIS Touch Quick Installation & Maintenance Guide Version 1.1 Below is a detailed description of the configuration setting for the latest Texecom Premier Elite range if you have different version of the Texecom Premier range or want to preform u pload/download connection Win tex then please refer to the IRIS Texecom Premier Installation manual or IRIS Remote Service App Client User Guide for Texecom range from http://www.chironsc.com/downloads_security.html Texecom Premie

• Chiron Iris Touch, Page 6 of 16 IRIS Touch Quick Installation & Maintenance Guide Version 1.1 6. Installing the IRIS Touch Use the following procedure to install your IRIS Touch dialler: 6.1. Mounting Choose a suitable location taking into consideration the routing of both power and dialler interface within the alarm panel or separate enclosure. Secure the dialler within the enclosure using the standoff or the alternative self-adhesive feet. Note: For EN50131-10 compliance you must use the supplied s tandoff and not the 6.2. Power The IRIS Touch dialler can be

• Chiron Iris Touch, Page 10 of 16 IRIS Touch Quick Installation & Maintenance Guide Version 1.1 The configuration menu on the Galaxy pa nel for the Ethernet card is found at location 56 (Communications) entry 4 (Ethernet), please enter the required information as indicated below. You must enter Engineer Mode to access these options. 56 = Communication 4 = Ethernet 01= Module Config 1 = IP Address - Program in the IP address for the IRIS e.g. 192.168.0.10 2 = Site Name - Leave blank 3 = Gateway IP - Enter the network gateway IP a

• Page 8 of 16 IRIS Touch Quick Installation & Maintenance Guide Version 1.1 Reference ground pins 1 6.5. PIN Inputs The IRIS Touch dialler has 6 Pin inputs that can be used to generate alarm messages • Text messages via SMS (GSM &GPRS.) • SIA, Contact ID or Fast Format alarm messages over IP to the monitoring c entre. Note: These pin a

Related Products and Documents (Security System):

Comparable Devices:

Similar Resources:

• NAPCO Gemini GEM-P1664 (60 pages) INSTALLATION INSTRUCTIONS HARDWIRE WIRELESS GEM-P1664 CONTROL PANEL/COMMUNICATOR WI1424A 1/06 © NAPCO 2006 RFor use with "Classic" keypads (GEM-RP1CAe2, GEM-RP2ASe2, GEM-RP3DGTL and GEM-RP4RFC/GEM-RP4C) and with "K Series" keypads (GEM-K1CA, GEM-K2AS, GEM-K3DGTL, and GEM-K4RF/GEM-K4) "K Series" GEM-K2AS RCOMPUTERIZED SECURIT …

• GE SuperBus 2000 (3 pages) 466-1876 Rev. B June 2005SuperBus® 2000 RS-232 Automation ModuleInstallation InstructionsProduct SummaryThe SuperBus® 2000 RS-232 Automation Module allows you to connect compatible, third-party automation devices to Concord (v2.5-later), Concord 4, Concord Express (v4) and Advent panels.For added security, you can install a magnet and reed switch (not incl …

• Luda Elektronik horseAlarm (17 pages) GSM Alarmer – DESICHERHEITSVORKEHRUNGEN / WICHTIGE INFORMATIONEN• BefolgenSiestetsdieinIhremStaatgültigenGesetzeundVorschriften.• LassenSiekeinePlastikverpackungeninderNähevonKindern,umein  Erstickungsrisikozuvermeiden.• PlatzierenSiedasNetzteilnic …

• Maxsys PC4020 (84 pages) PC4020/PC4020CF v3.5 • Installation ManualDLS2002 or higherWARNING: This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should be carefully read. …

• Esse-ti HELPY 2W-V BASIC (28 pages) 31/07/2019 Alarm system for elevators compliant with the European Standard EN 81-28:2018 HELPY 2W-V BASIC QUICK GUIDE …

• Cisco Nexus 7000 Series (2 pages) Phone BasicsBeyond picking up and putting down the handset, IP phones allow alternative ways to place, answer, end and manage a call.PLACING CALL• Press LINE, SPEAKER or HEADSET buttons > dial • Press the NEWCALL soft key > dial• Press a SPEED DIAL button• Select a number from a directory > press the DIAL soft key or lift the handset.ANS …

Comments, Questions and Opinions: