Manualios.com

AOpen FM56 Operation & User’s Manual

AOpen FM56 Manual Online:

3.1, 1943 votes
AOpen FM56 User Manual
AOpen FM56 User Guide
AOpen FM56 Online Manual

Text of AOpen FM56 User Guide:

  • AOpen FM56, CHECKING COUNTRY/REGION Perform the following steps to check the country/region settings for the modem before you use the Internal Fax Modem 56K. For best performance, make sure that the country/region is set to the country that you are using the modem in, eg. United States of America. Windows 95/98/ME 1. Go to Start→Settings→Control Panel→Modems. 2. When the Modems Properties dialog box appears, click the Dialing Properties button. 3. When the Dialing Properties dialog box appears, specify the country/region that you are i

  • AOpen FM56, - 12 - 6. Click the Have Disk…button. 7. Click Browse to select the drive where the device driver exists. (for example: D:\) Enter the CD-ROM driver letter followed by driver\Win_ME. 8. Click Next.

  • AOpen FM56, &T6 Remote digital loopback test, in normal mode &V View active file and stored phone numbers &W Store active configuration into the modem’s NVRAM &Zn=x Store telephone number n=0 to 3 x=<string> see also the dial modifier in ”ATDn” command The max. number of digits per string is 40. * Manufacturer default Extended “AT\” (Back Slash) Command Set Command Options Function & Description \Jn Constant DTE speed option \J0 * DCE and DTE rates are independent \J1 Force the DTE interface speed to the DCE connection rate (line spe

  • AOpen FM56, - 6 - 6. Repeat Step 3 as described above. 7. Follow the on-screen instruction to continue. 8. When finished, press Finish to complete the installation. Remember to restart Windows 95 to activate the new device.

  • AOpen FM56, - 27 - The modem does not auto-answer the phone.  Make sure the software is configured to auto-answer the phone.  Type ATS0=n then press Enter. The n stands for the number of rings the modem will answer on. The software does not control the modem properly or can not detect the modem.  Make sure the software has been set up correctly. Check the initialization and dial strings.  Some TSRs (programs that stay in memory after they are loaded) may conflict with the communications software.  Restart your computer without loading any TSRs. The characters on the screen are doubled.  Both the modem and the software have the echo feature turned

  • AOpen FM56, APPENDIX A: AT COMMAND Basic AT Command Set Command Options Function & Description A/ Re-execute the last command string <any key> Terminate the current connection attempt when entered in handshaking state All the following commands require an “AT” prefix A Go off-hook and attempt to establish a connection without waiting for a ring Bn Line modulation options B0 Select V.22 mode for 1200 bps connection B1 * Select Bell 212A for 1200 bps connection B2 Selec

  • AOpen FM56, - 19 - 4. When the following window appears, click Continue Anyway to complete the software installation. 5. Go to StartRun, enter “regedit”, and click OK. 6. Select HKEY_LOCAL_MACHINE, and click SOFTWARE to expand. If the Lucent and Modem are listed as below, the modem exists and is successfully enabled. If not, consult your distributor for the technical support.

  • 3 Attempt to a 300 bps connection 5 Attempt to a 1200 bps connection 6 Attempt to a 2400 bps connection 7 Attempt to a 4800 bps connection 8 Attempt to a 7200 bps connection 9 Attempt to a 9600 bps connection 10 Attempt to a 12000 bps connection 11 Attempt to a 14400 bps connection 12 Attempt to a 16800 bps

  • AOpen FM56, - 5 - 3. Type the CD-ROM drive letter followed by driver\win95. Or you may click the Browse button to select the driver\win95 folder in your CD-ROM drive. Click OK. 4. When the following figure appears, click Finish. The Installation program will continue. 5. When the following figure appears, click OK to continue.

  • AOpen FM56, FCC REGULATORY STATEMENTS FCC Part 68 Registration This device complies with FCC Part 68 rules, and the use of this device is subject to the following restrictions: 1. The FCC has established rules which permit this device to be directly connected to the telephone network. Standardized jacks are used for these connections. This equipment should not be used on party lines or coin phones. 2. If this device is malfunctioning, it may also be causing harm to the telephone network; this dev

  • AOpen FM56, - 28 -  If you are using touch tone dialing on a phone line that requires pulses, then it may not work.  Use ATDT in place of ATDP. When your communications software tells the modem to dial, it does not.  Make sure the software dialing prefix is ATDT.  Make sure the software and modem are set to the same COMx: port.  The modem may not have hung up the phone line since the last call.  Change to command mode and type ATH then press Enter. When dialing another modem, you receive a 'CONNECT' response, but nothing else.  The remote modem may be waiting for you to type a command. Or try to press Enter for logging on to the remote site.

  • AOpen FM56, - 39 - seconds, that the modem must wait (minimum 2 seconds even if the value is less than 2) after going off-hook before dialing the first digit of the telephone number 2 - 65 For international version 003 S7= Set the time, in seconds, that the modem must wait before hanging up because carrier is not detected 1 - 255 For international version 050 35 - 59 For Japanese version 050 S8= 0 - 65 Set the time, in seconds, that the modem must pause when the “,” dial modifier is encountered in the dial string 002 S10= 1 - 255 Set the length of time, in tenths of a second, that the modem waits before hanging up after a loss of carrier 0

  • AOpen FM56, SOFTWARE INSTALLATION Windows 95 Installaiton 1. Reboot the computer system after the modem is correctly plugged into your PCI slot of computer. The Windows95 will automatically detect the new hardware device and prompt the following message. Click on Next button to continue. 2. Insert the device driver compact disc into your CD-ROM drive. When the following dialog box appears, click the Other Locations button. - 4 -

  • AOpen FM56, 10 38666 kbit/s 11 40000 kbit/s 12 41333 kbit/s 13 42666 kbit/s 14 44000 kbit/s 15 45333 kbit/s 16 46666 kbit/s 17 48000 kbit/s 18 49333 kbit/s 19 50666 kbit/s 20 52000 kbit/s 21 53333 kbit/s - 37 -

  • AOpen FM56, TROUBLE SHOOTING This chapter provides information on the most commom problems, the possible causes, and the solutions. The modem does not respond to AT commands.  Conflict of COMx: port setting with another device.  Change the COMx: port of the Internal FaxModem 56K to a free port. Be sure to update your software COMx: port setting as well. The modem does not execute the command line.  Make sure you are typing 'AT' at the beginning of command line.  Make sure the modem is not in Data Mode. type +

  • AOpen FM56, W2 * CONNECT result code reports DCE speed. Enable protocol result codes. Xn Select result codes/call progress options X0 Display CONNECT or “1” for all speeds. Ignore dial tone and busy tone detection. X1 Display connect message and the modem’s data rate, and an indication of the modem’s error correction and data compression. Ignore dial tone and busy tone detection. X2 Display connect message and the modem’s data rate, and an indication of the modem’s error correction and data compression. Check dial tone before proceeding dialing, ignore busy tone detection. X3 Display connect message and the modem’

  • AOpen FM56, - 13 - 9. Click Next to proceed. 10. Click Finish to complete the software installation. Note: Windows ME users who experience low connection speeds to their Internet provider can apply a driver update to improve speeds. To do this, insert the modem driver CD, (you will need to press Exit when the PICShell software installation utility starts). Click on Start, Programs, Windows Explorer. Now explore the CD-ROM by opening the Driver folder, then Win_Me_faster. Double-click on Driver_update.exe, this will lead you through the upgrade process.

  • AOpen FM56, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the distance between the equipment and receiver  Connect the equipment into an outlet on a circuit different from that t

  • AOpen FM56, - 29 -  Hang up the call and try to connect again for getting a better telephone line.  If there are other telephones on the same line that your modem is using, someone may have picked up a telephone on that extension.  Your telephone line may have the call waiting feature.  Try adding '*70,' to your ATDT dialing command line. If it doesn’t help, ask your telephone company how to disable it temporarily. The modem gets errors in transmitted data randomly.  Try to use V.42 or MNP1

  • 11 50000 bps 12 52000 bps 13 54000 bps 14 56000 bps S48= 7, 128 LAPM error control and feature negotiation. S48=7 Negotiation enabled S48=128 Negotiation disabled. Force immediate fallback options specified in S36 S36=0 or 2, and S48=7 LAPM or hang up S36=0 or 2 and S48= 128 Don’t use S36=1 o

  • AOpen FM56, - 9 - 6. Follow the on-screen instructions to proceed. 7. The program will proceed automatically. Click Finish to complete software installation. Windows ME Installation Restart the computer system after the modem is properly plugged into the PCI slot of your computer. Windows ME will automatically detect the device. If you want to use the Microsoft built-in driver, execute d:\Driver\WinME\PAR.exe (assume that d: is your CD-ROM drive). Or you may update the device driver with the utility provided by the manufacturer.

  • Table of Contents INTRODUCTION ...................................................1 S PECIFICATIONS .....................................................1 S YSTEM R EQUIREMENTS ........................................2 HARDWARE INSTALLATION ...........................3 SOFTWARE INSTALLATION.............................4 W INDOWS 95 I NSTALLAITON .................................4 W

  • AOpen FM56, UNINSTALL If you have to uninstall the driver of Internal FaxModem 56K for some reason after installation, perform the following steps. 1. Go to My Computer. 2. Select the CD-ROM drive whichever contains the Internal FaxModem 56K device driver. 3. Choose and double-click the win98, win2000&XP, winME or winnt folder depending on the system you are working on. 4. Click Ltremove.exe . The Internal FaxModem 56K device driver will automatically removed. - 23 -

More Instructions:

DOWNLOAD

Related Products and Documents (Modem):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Viessmann Vitosol 200-T Installation instructions manual viessmann/vitosol-200-t-9D1.pdf 10 Nov 2023 52 3 Mb
2 SPM BC100 Operation & user’s manual spm/bc100-P32.pdf 15 May 2023 42
3 Accom ASWR8150 Technical manual accom/aswr8150-GHH.pdf 03 Mar 2023 236
4 Peco 22610709 Owner's manual toro/22610709-58P.pdf 27 May 2023 12 0.37 Mb
5 Samsung S3C8275X Operation & user’s manual samsung/s3c8275x-9O7.pdf 12 Oct 2022 324 2.68 Mb
6 Pioneer FH-X500UI Owner's manual pioneer/fh-x500ui-MMF.pdf 04 Dec 2022 80

Similar Resources:

  • Black Box

    ServPower Omni PS730A

    (20 pages)
    © Copyright 2006. Black Box Corporation. All rights reserved.1000 Park Drive · Lawrence, PA 15055-1018 · 724-746-5500 · Fax 724-746-0746 ServPower Omni OCTOBER 2007 PS730A PS730A-M PS731A PS731A-M PS732A PS732A-M PS733A PS733A-M PSE711 PSE712 PSE713 PSE714 PSE721 PSE722 PSE723 PSE724 Order toll-free in t …
  • iStorage

    cloudAshur

    (130 pages)
    #1www.istorage-uk.comiStorage cloudAshur® Manual / Handbuch / Manuel v1.3English User Manual - Table of Contents ...............................................4Deutsch Benutzerhandbuch - Inhaltsverzeichnis ...................................44Français Manuel d’utilisation - Table des matières ...............................84 …
  • Huawei

    E156G

    (15 pages)
    Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall …
  • Avtech

    MOD-GSM-1

    (4 pages)
    Installation NoteAVTECH Software, Inc. Temperature & Environment Monitoring... Made Easy! AVTECH.comGSM Modem w/USBAVTECHAVTECH’s GSM Modem allows you to send text message alerts over any GSM/GPRS/EDGE network from Room Alert Manager software. This compact 3G/2G modem connects directly to Room Alert Manager’s host system by a USB 2.0 connector, w …
  • Fortinet

    FortiGate-100

    (2 pages)
    BackFrontPowerLEDInternal, External, DMZInterfacesStatusLEDINTERNALEXTERNALDMZPOWERSTATUSDMZExternalConsoleDC +12V 5AInternalRS-232 SerialConnectionPowerConnectionDMZ, External, InternalInterfacesNull-Modem Cable(RS-232)DocumentationEthernet Cables:Orange - CrossoverGrey - Straight-throughUSER MANUALFortiGate-100QuickStart GuideCopyright 2003 Fortinet Incorp …
  • INSTEON

    POWERLINC 2413S

    (2 pages)
    Quick-Start GuidePOWERLINCTMMODEM - INSTEON SERIALINTERFACE (DUAL BAND)Serial RS-232 and TTL Interface (#2413S)INSTEONTMPowerLinc interface with RS-232 serial and electronic TTLcommunications for full-time software and hardware host applications.InterfacePortNNeeeedd HHeellpp?? FFoorr aassssiissttaannccee ccaallll yyoouurr ffrriieennddllyy ssuuppppoor …

Comments, Questions and Opinions: