Belkin Baby 250 Operation & User’s Manual

Text of Belkin Baby 250 User Guide:

• Belkin Baby 250, 4 Charging light Red when the Parent unit is correctly placed on the charger. Power socket For connection to the mains power socket via the power adapter cable supplied. Parent unit charger BackFront Charging light Power socket YOUR BELKIN BABY 250

• Belkin Baby 250, 22 USING YOUR BELKIN BABY 250 Start the feed timer countdown 1. Press . Nightlight is displayed, press until Feed Timer is displayed and press . 2. Start? is displayed, press . The display will briefly show Timer On and then the timer will be shown counting down the seconds from the time you set. When the timer has finished counting down to 00:00 you will hear an alert beep and the timer digits and icon will flash. Press any button on the Parent unit to stop the alert. If you do not stop the alert it will automatically stop after 2 minutes (or it will sta

• Belkin Baby 250, 20 USING YOUR BELKIN BABY 250 Choose a song to play using the Parent unit 1. Press . Nightlight is displayed, press to display Music and press . 2. Play? is displayed, press to display Choose Song and press . 3. Use the and buttons to scroll through the eight song titles and Play All. Press when the option you want is displayed. The display will show Saved briefly and you’ll hear a confirmation tone. Set a play time for music 1. Press . Nightlight is displayed, press to display Music and press 2. Play? is displayed, press until Timer is displayed an

• Belkin Baby 250, 12 USING YOUR BELKIN BABY 250 Switch the Baby unit on 1. Press and hold the button for 1 second. The nightlight will briefly illuminate and then the green LED will flash until it Links with the Parent unit. Once linked the green LED will remain on. Switch the Parent unit on 1. Press and hold the button on the Parent unit until all the LEDs on the top of the unit briefly illuminate. The green Link indicator will flash. Once the units are linked, the green Link indicators on the Parent and Baby units will stop flashing and remain a steady green. The units ar

• Belkin Baby 250, 2 YOUR BELKIN BABY 250 Parent unit (continued) 10 Battery status indicator Red light indicates the batteries are low and need re-charging. 11 Link indicator Steady green indicates that the Baby and Parent units are linked. Flashes green if no link established for 30 seconds. Flashes red if no link established after 30 seconds. Also flashes green when the Talk button is pressed on the Parent unit to initiate parental talk back. 12 Torch (on back of unit) Press to switch the torch feature on and off. 13 Power on/off (on top of unit) Press an

• TABLE OF CONTENTS Your Belkin baby 250 ...................................... 1 Setting up................................................ 7 Using your Belkin baby 250 ............................... 12 Help ....................................................29 Support and warranty .................................... 31 Regulatory ........................................

• Belkin Baby 250, 16 USING YOUR BELKIN BABY 250 The Parent unit menu The button on the Parent unit can be used to select and change settings on the Baby unit without having to risk disturbing your baby. You can access the settings by: 1.Press then press or to scroll through the menu options shown on the top of the display. Press when the option you want is displayed. 2.The first sub menu option will be displayed, press to scroll through the options. The ( arrows) indicate when you can scroll either up o

• Belkin Baby 250, 29 HELP Parent unit is beeping • The link has been lost between your units. Check that the Baby unit Link indicator is illuminated. If not, please ensure that the power adapter is still connected and if this still does not switch on, please test in a different electrical socket. • The feed timer has been set. • The crying alert is switched on. • The temperature alert has been triggered. • The batteries are low. • The Find button has been pressed on the Baby unit. If the Parent unit sti

• Belkin Baby 250, 10 SETTING UP Baby unit Plug the remaining power adapter cable into the socket marked on the back of the Baby unit and plug the other end into the mains power and switch on. Warning Never use non-rechargeable batteries in the Parent unit. Only use the recommended type – 2 x AA NiMH 1300mAh batteries. Using other types could permanently damage the unit. Charge the batteries as instructed in this user guide. The Parent unit can still be used when it is in the charger. Removing the batteries If you ever need to remove the batteries, simply slide open the battery co

• 7 SETTING UP Warning! Only use the power adapters supplied. Using incorrect power adapters may permanently damage your product. Battery performance Rechargeable batteries in the Parent unit will last approximately 20 hours in normal use. Please note that new batteries do not reach full capacity until they have been in normal use for several days. The charge c

• Belkin Baby 250, 5 1 11 YOUR BELKIN BABY 250 Baby unit 1 Ni ghtlight Press to switch the Nightlight on or off. 2 Power on/of f Press and hold to switch the power on or off. 3 Skip forward When music has been switched on (see Music button description below), press to skip through the songs available. 4 Music Press to switch music on at the Baby unit (the music and duration will be as last set at the Parent unit). Press again to switch the music off. To change the song, press the Skip button. 5 Link indicator Steady green indicates t

• Belkin Baby 250, © 2014 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. iPad, iPhone, iPod touch, Mac, Mac OS, and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. Windows, Windows Vista, Internet Explorer, and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Android and Google Chrome are trademarks of Google Inc. Belkin Ltd. Express Business Park Shipton Way, Rushden NN10 6GL, United Kingdom Belkin Iberia Avda de Barajas, 24, Edifi

• Belkin Baby 250, 11 SETTING UP Positioning your units The Baby unit should ideally be within 1m-2m of your baby for best performance. If you place the Parent and Baby units too close together you will hear a high pitched noise, this is normal. The units are designed to be located at a distance from one another, e.g. in separate rooms. Important: The link confirmation between the two units is vital for use so they can communicate. If the link between the units is broken at any time, the Link indicators on the Parent and Baby units will flash green as they tr

• Belkin Baby 250, 34 SUPPORT, AND WARRANTY How state law relates to the warranty. THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIA

• Belkin Baby 250, 9 SETTING UP Place the Parent unit into the charger. The red charging light will illuminate on the charger and the battery icon will start scrolling on the Parent unit display to indicate that the batteries are being charged. Leave the batteries to charge for 16 hours to reach maximum charge. When the batteries are fully charged the battery icon on the display will show a full charge . Battery low warning – Parent unit When the batteries are low – approximately within 1 hour of running out – the Parent unit will emit a low

• Belkin Baby 250, 17 USING YOUR BELKIN BABY 250 Nightlight You can set a comforting nightlight on the Baby unit. There are 3 brightness levels to choose from and you can set a period of time for the nightlight to illuminate. Switch nightlight on/off and select brightness level using the Baby unit 1.To switch on, press the button. 2.Press repeatedly to select the brightness level. 3.To switch off, press . Switch nightlight on/off using the Parent unit 1.To switch on, press the button. Nightlight is displayed, press . 2.Turn On? is displayed, press . Light On will briefly be displayed, then the icon. 3.To switch off, press . N

• 27 USING YOUR BELKIN BABY 250 Backlight You can select whether or not the LCD backlight comes on when an alert is activated. When the backlight comes on it will stay on for 15 seconds. The default setting is On. 1. Press . Nightlight is displayed, press until SetUp is displayed and press . 2. Crying Alert is displayed, press until Backlight is displayed and press . 3.

• Belkin Baby 250, 33 SUPPORT, AND WARRANTY Technical Support US http://www.belkin.com/support UK http://www.belkin.com/uk/support Australia http://www.belkin.com/au/support New Zealand http://www.belkin.com/au/support Singapore 1800 622 1130 Europe http://www.belkin.com/uk/support AUSTRIA 0820 200 766 www.belkin.com/de/networking/ BELGIUM 07 07 00 073 www.belkin.com/nl/networking/ www.belkin.com/fr/networking/ CZECH REPUBLIC 239 000 406 www.belkin.com/uk/networking/ DENMARK 701 22 403 www.belkin.com/uk/networking/ FINLAND 0972519123 www.belkin.com/uk/networking/ FRANCE 08 - 25 54 00 26 www.belkin.com/fr/networking/ GERMANY 0180 - 500 57 09 www.belkin.com/de/network

• Belkin Baby 250, 21 USING YOUR BELKIN BABY 250 Feed Timer You can set a Feed Timer on the Parent unit to act as a countdown timer that will alert you when you next need to feed your baby. You have a choice of alert types (beep, beep & vibe and vibrate) and you can set the timer to repeat itself once the alert sounds. Set the feed timer countdown duration 1. Press . Nightlight is displayed, press until Feed Timer is displayed and press . 2. Start? is displayed, press to display Duration and press . 3. The display will show 00

• Belkin Baby 250, 8 SETTING UP Parent unit Plug one of the power adapter cables into the socket marked on the back of the Parent unit charger and plug the other end into the mains power wall socket and switch the power on. Activate the batteries by pulling the plastic tab away from the bottom of the Parent unit.

• Belkin Baby 250, 31 SUPPORT, AND WARRANTY Belkin International, Inc., Limited 2-Year Product Warranty What this warranty covers. Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship. What the period of coverage is. Belkin warrants the Belkin product for two years. What will we do to correct problems? Product Warranty. Belkin will repair or replace, at its option, any defective product free of charge (except for sh

• 32 SUPPORT, AND WARRANTY How to get service. To get service for your Belkin product you must take the following steps: 1. Contact Belkin International, Inc., on the telephone number listed on the next page, within 15 days of the Occurrence. Be prepared to provide the following information: a. The part number of the Belkin product. b. Where you purchased th

• Belkin Baby 250, 14 USING YOUR BELKIN BABY 250 Mute Low For discreet operation when you do not wish to hear any low level sounds, you can still monitor your baby using the Baby sound level LED indicators. When Mute Low is switched on, any sounds from the Baby unit to the Parent unit will be muted unless a sound is made above a set level. The set level are sounds that are louder than the first two green LEDs would register If the Parent unit receives sound up to the level of the first two LEDs then they will turn amber but no sound will be heard, if the sound rises above this level then the unit will un-mute so you can hear the sounds. 1.To switch Mute Low on, press the

• Belkin Baby 250, 30 HELP You can hear a high pitched noise • The units might be too close to each other. • The volume setting might be too high. Talk back feature is not working • Check that the volume is loud enough at the Baby unit • Check the units are linked. Parent unit remains silent or very quiet • You may have set the volume too low • You may have switched a Mute feature on.

Related Products and Documents (Baby Monitor):

Comparable Devices:

Similar Resources:

• Sony PVM-2541 (37 pages) ProfessionalVideo MonitorOperating InstructionsBefore operating the unit, please read this manual thoroughly and retain it for future reference.PVM-2541PVM-17414-284-713-13(1)© 2011 Sony Corporation …

• Swissvoice Babycom 268 (100 pages) Digital Baby PhoneBabycom 268BedienungsanleitungMode d’emploiIstruzioni per l’usoUser manualIstruccionesInstrukcja Obsługi Babycom 268 DE_090909:Babycom …

• Panasonic KX-HNC301 (24 pages) Installation ManualBaby MonitorAdditional cameraModel No. KX-HNC301Thank you for purchasing a Panasonic product.This unit is an additional camera compatible with the following series of Panasonic Baby Monitor:– KX-HN3001/KX-HN3051You must register this camera with your baby monitor beforeit can be used. This installation manual describes only the stepsn …

• Chicco BEBÈCARE EASY-TECH (45 pages) Istruzioni di utilizzoInstructions for useNotice d’emploiGebruiksaanwijzingenGebrauchsanleitungInstrucciones de usoInstruções de utilizaçãoInstruções de utilizaçãoInstrukcja użytkowaniawww.chicco.com …

• Foscam FosBaby P1 (2 pages) Wi-Fi Light DescriptionO No Wi-Fi connectionFlashing every 0.1 seconds Soft AP takes eect Flashing every 0.2 seconds EZLink takes eect (default)Flashing every 0.4 seconds …

• Oricom Secure 710 (22 pages) Baby MonitorSecure 710User GuideKEEP THIS USER GUIDE FOR FUTURE REFERENCEAlways retain your proof of purchase in case of warranty service and register your product on line at:AUSTRALIA: www.oricom.com.au NEW ZEALAND: www.oricom.co.nz …

Comments, Questions and Opinions: