Manualios.com

DAQ system PCI-DIO6402 Operation & User’s Manual

DAQ system PCI-DIO6402 Manual Online:

4.55, 1693 votes
DAQ system PCI-DIO6402 User Manual
DAQ system PCI-DIO6402 User Guide
DAQ system PCI-DIO6402 Online Manual

Text of DAQ system PCI-DIO6402 User Guide:

  • DAQ system PCI-DIO6402, PCI-DIO6402 Users Manual (Rev 1.0) -1- http://www.daqsystem.com PCI-DIO6402 User’s Manual Windows, Windows2000, Windows NT and Windows XP are trademarks of Microsoft. We acknowledge that the trademarks or service names of all other organizations mentioned in this document as their own property. Information furnished by DAQ system is believed to be accurate and reliable. However, no responsibility is assumed by DAQ system for its use, nor for any infringements of patents or other rights of thir

  • DAQ system PCI-DIO6402, PCI-DIO6402 Users Manual (Rev 1.0) -2- http://www.daqsystem.com Contents 1. PCI-DIO6402 Block Diagram 2. Connector Pin Map 3. Digital Output Circuit 4. External Connection (OUTPUT) 5. Board Option Setup 6. Installation 7. Sample Program Explanation References

  • DAQ system PCI-DIO6402, PCI-DIO6402 Users Manual (Rev 1.0) -3- http://www.daqsystem.com 1. PCI-DIO6402 Block Diagram PCI Target PCI BUS Local Bus Address Data(Mem,I/O) DIO 32bit Input External Interface IO Decoder To each IO Module PCI-DIO64xx Series INTERNAL BLOCK MEM Decoder BUS Mux DIO 32bit Output DIN 64bit Input DOut 64bit Output PCI-DIO6400, cPCI-DIO6400 PCI-DIO6402 PCI-DIO6401 [Figure 1-1. PCI-DIO64xx Internal Block Diagram] The PCI-DIO6402 is designed for high performance digital logger with PCI Interface. I

  • DAQ system PCI-DIO6402, PCI-DIO6402 Users Manual (Rev 1.0) -4- http://www.daqsystem.com 2. Connector Pin Map The PCI-DIO6402 board is equipped with 37 pin D-SUB connector for external digital output in standard PCI Bracket. Figure 2-1 shows the bracket and connector of the board. [Figure 2-1. PCI-DIO6402 Bracket & Board Layout] [Figure 2-2. PCI-DIO6402 Internal Block

  • DAQ system PCI-DIO6402, PCI-DIO6402 Users Manual (Rev 1.0) -5- http://www.daqsystem.com 3 10 9 8 7 6 1 2 5 4 19 18 17 16 15 14 13 12 11 25 24 23 22 21 20 OUT_14 GND OUT_18 OUT_16 GND OUT_20 OUT_22 OUT_28 OUT_26 OUT_24 OUT_30 OUT_PWR OUT_13 OUT_15 GND OUT_VDD OUT_17 OUT_19 OUT_21 OUT_23 OUT_25 OUT_27 OUT_29 OUT_31 33 32 31 30 29 28 27 26 37 36 35 34 OUT_10 OUT_08 OUT_06 OUT_12 OUT_04 OUT_02 OUT_00 OUT_01 OUT_03 OUT_0

  • PCI-DIO6402 Users Manual (Rev 1.0) -6- http://www.daqsystem.com 10 GND External Ground 11 OUT_16 Isolated Digital Output 16 12 OUT_18 Isolated Digital Output 18 13 OUT_20 Isolated Digital Output 20 14

  • PCI-DIO6402 Users Manual (Rev 1.0) -7- http://www.daqsystem.com 5 OUT_36 Isolated Digital Output 36 6 OUT_37 Isolated Digital Output 37 7 OUT_38 Isolated Digital Output 38 8 OUT_39 Isolated Digital Output 39 9

  • DAQ system PCI-DIO6402, PCI-DIO6402 Users Manual (Rev 1.0) -8- http://www.daqsystem.com 3. Digital Output Circuit out0 DOUT0 330 out1 DOUT1 out63 DOUT63 330 330 +3.3V OUT_POWER OUT_VDD [Figure 3-1. Digital Output Circuit] Figure 3-1 shows that the digital output is isolated by photo-coupler. The “OUT_POWER” is connected commonness to an output circuit. The “OUT_VDD” works external power or 5V PCI of internal board or ISO 5V (DC-DC Output power) according to conne

  • DAQ system PCI-DIO6402, PCI-DIO6402 Users Manual (Rev 1.0) -9- http://www.daqsystem.com 4. External Connection (OUTPUT) DC-DC Power PCI Power J2 Jumper Setup 1 2 3 1 2 OUT31-0 330 +3.3V OUT_POWER OUT_VDD DOUT 31 - 0 GROUND JP1 Jumper Setup EXT POWER DC External GROUND Load PCI-DIO6402 Board External Connection [Figure 4-1. Output Port External Connection] The OUTPUT can use to select the external power or internal power. When

  • DAQ system PCI-DIO6402, PCI-DIO6402 Users Manual (Rev 1.0) -10- http://www.daqsystem.com EXT POWER DC OUT_POWER 󱺭󱖵 GROUND 󱖵󲶍 OUT_VDD OUT 31-0 [Figure 4-2. External Connection] Figure 4-2 shows the making an output port connection as it uses a 37pin D-Sub connector.

  • DAQ system PCI-DIO6402, PCI-DIO6402 Users Manual (Rev 1.0) -11- http://www.daqsystem.com 5. Board Option Setup DC-CD Converter (󱥕󲤒󱣡󱷆) J2 JP1 POWER GROUND 21 SW1 [Figure 5-1. cPCI-DIO6402 Appearance] 5-1. Power Option Setup If usable environment don’t use external power, it can use at boards which it supplied the power. At this time it can set up by jumper whether or not output to power of isolated DC-DC Converter (option) or output to power of PC Internal Power (+5V). Also the GR

  • PCI-DIO6402 Users Manual (Rev 1.0) -12- http://www.daqsystem.com 5.1.1 J2 Jumper Setup J2 Jumper Setup 31 2 POWER PIN Floating(External Power Use) DC-DC converter Power PC +5V Output 31 2 31 2 3 11 * Refer Figure 5-1

  • DAQ system PCI-DIO6402, PCI-DIO6402 Users Manual (Rev 1.0) -13- http://www.daqsystem.com 5-2. Board Address Setup Several DIO6402 series boards classify each board address, you shall use it at systems that a lot of I/O ports was required. Distribution of each board sets it up through 4 pin switch (SW1) in a board. A system is designed of 4 maximum boards at the same time so as usable. SW1 Setup 2 1 O

  • PCI-DIO6402 Users Manual (Rev 1.0) -14- http://www.daqsystem.com 6. Installation The installation order is as follows, explain Windows XP basis if there isn’t special explanation. (1) If new hardware is found, Wizard will

  • DAQ system PCI-DIO6402, PCI-DIO6402 Users Manual (Rev 1.0) -15- http://www.daqsystem.com (3) When you click Next, the driver files are installed. (4) When the installation is complete, normally same as the picture below.

  • DAQ system PCI-DIO6402, PCI-DIO6402 Users Manual (Rev 1.0) -16- http://www.daqsystem.com (5) If the installation is completely finished, you confirm it in the following ways. Do the following steps to show up the “Device Manager” window. [My Computer -> properties -> Hardware -> Device Manager -> Multifunction Adaptors -> PCI-DIO6400] [Figure 6-2. “Select “My computer”->”Properties”] [F

  • DAQ system PCI-DIO6402, PCI-DIO6402 Users Manual (Rev 1.0) -17- http://www.daqsystem.com [Figure 6-4. “Device Manager” window] If you can see the “PCI-DIO6400” at Multifunction Adaptors, the driver installation is to have been over. (Check the red circle) The PCI-6402 driver is the same as the PCI-DIO6402. Notice : After installation, you should re-boot the system for the proper operation.

  • DAQ system PCI-DIO6402, PCI-DIO6402 Users Manual (Rev 1.0) -18- http://www.daqsystem.com 7. Sample Program Explanation 7-1 Program Interface DAQ system provides a sample program to make the user be familiar with the board operation and to make the program development easier. You can find the sample program in the CDROM accompanying with the board. One of the execution file is “PCI_DIO6400.exe”. Sample program is provided in source form in order to show the usage of API (Application Programming

  • DAQ system PCI-DIO6402, PCI-DIO6402 Users Manual (Rev 1.0) -19- http://www.daqsystem.com 7-2 Function Explanation No. Name Description Note 1 Model No Select the Model Name PCI-DIO6400 selection 2 Board No Select the Board Number (Board#0 ~ #3) By SW1 Setup 3 Open Device Open the selected Board 4 List Device It displays a board number which installed in a system. Not Used currently. 5 DIN Read When the button click, a value to read an input port is marked to

  • DAQ system PCI-DIO6402, PCI-DIO6402 Users Manual (Rev 1.0) -20- http://www.daqsystem.com References 1. PCI System Architecture -- MindShare Inc. 2. PCI Local Bus Specification -- PCI-SIG 3. General information on PCI board API -- DAQ system 4. AN201 How to build application using APIs -- DAQ system 5. AN242 PCI-DIO64xx API Programming -- DAQ system

Related Products and Documents (PCI Card):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Flight Display Systems FD900X3C Installation and operation manual flight-display-systems/fd900x3c-R5P.pdf 16 Mar 2023 11
2 Alfa Romeo 166 Booklet alfa-romeo/166-4V6.pdf 27 Jul 2023 280 3.88 Mb
3 Rugged Computing IA80 Operation & user’s manual rugged-computing/ia80-9IC.pdf 26 May 2023 85
4 Sony Xperia E4g Dual E2033 Operation & user’s manual sony/xperia-e4g-dual-e2033-HBV.pdf 26 Oct 2022 122
5 Eonon E1009 Instructions manual eonon/e1009-13P.pdf 23 Jun 2022 24 29.25 Mb
6 Trane X13511537-01 Setup instructions trane/x13511537-01-64G.pdf 10 Sep 2023 2

Similar Resources:

  • Equustek

    DLPCIe Series

    (22 pages)
    DLPCIe User’s Guide Revision 1.03 – Feb. 20th, 2017 Equustek Solutions, Inc. Suite 286, 5489 Byrne Rd. Burnaby, BC, Canada V5J 3J1 Toll Free: 888-387-3787 http://www.equustek.com …
  • National Instruments

    PCIe-7820R

    (10 pages)
    GETTING STARTED GUIDENI PCIe-7820RR Series Digital I/O Module for PCI Express, 128 DIO,Kintex-7 160T FPGAThis document describes how to begin using the PCIe-7820R.Safety GuidelinesCaution Do not operate the PCIe-7820R in a manner not specified in thisdocument. Product misuse can result in a hazard. You can compromise the safetyprotection built into the prod …
  • YASKAWA

    DX100

    (17 pages)
    MANUAL NO. HW0485767YASKAWA ELECTRIC CORPORATIONDX100 OPTIONSINSTRUCTIONSFOR MULTISTEP PRESSURE FUNCTIONUpon receipt of the product and prior to initial operation, read these instructions thoroughly, and retain for future reference.MOTOMAN INSTRUCTIONSMOTOMAN-- INSTRUCTIONSDX100 INSTRUCTIONSDX100 OPERATOR’S MANUALDX100 MAINTENANCE MANUALThe DX100 …
  • Teledyne

    LeCroy

    (4 pages)
    IntroductionUse this document for quick installation and setup.Teledyne LeCroy’s PCIe to SFF-8639 x4 NMVe/SCSIe Port A Adapter card provides a quick and simple means for test and debug of Solid State Drives (SSDs) based on PCI Express (PCIe®) protocols. It supports data rates of 2.5 GT/s (Gen1), 5 GT/s (Gen2) and 8 GT/s (Gen3). The PCIe to SFF-8639 x2 NVM …
  • Dynamic Engineering

    LVDS 8R

    (46 pages)
    Hardware and Software Design • Manufacturing Servicespage 1PCI LVDS 8R8 Channel LVDS Serial InterfaceDynamic Engineering435 Park Drive, Ben Lomond, CA 95005831-336-8891www.dyneng.com 10-2001-0202This document contains information of proprietary interest to Dynamic Engineering. It has been supplied inconfidence and the recipient, by acceptin …
  • Broadcom

    BCM94312MCG

    (37 pages)
    Contents: Company 54g Wireless LAN (WLAN) User ManualBroadcom 802.11g Mini PCI-E Card, BCM94312MCG User ManualIntroductionCompleting the SetupUtility FunctionsSpecificationsRegulatory InformationCompany Copyright StatementCompany Trademark Statement. Microsoft® and Windows® are trademarks owned by Microsoft Corporation. All other trademarks are the propert …

Comments, Questions and Opinions: