Axis 540 series Operation & User’s Manual
|
Section 5: Setting Up - OS/2 58 AXIS 540/640 User’s Manual About AXIS Print Utility for OS/2 AXIS Print Utility for OS/2 is a dual purpose application for network printing in the OS/2 environment. Its fundamental purpose is to: 1. Install and maintain the AXIS 540/640 printer port as an OS/2 printer port. 2. Capture and monitor print jobs directed to the AXIS 540/640 port. Print jobs may
Axis 540 series, 2 AXIS 540/640 User’s Manual Every care has been taken in the preparation of this manual; if you detect any inaccuracies or omissions, please inform us at the address on the back cover. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Electromagnetic Compatibility (EMC) notices USA This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications.
Axis 540 series, Section 4: Setting Up - Windows 52 AXIS 540/640 User’s Manual Client-Server Printing: Client Setup To print in client-server mode from within a Windows 95 environment, it is necessary to setup the server on a Windows for Workgroups workstation. Refer to Client-Server Printing: Server Setup, on page 49. Follow these steps to use your AXIS 540/640 for client-server printing at a Windows 95 client: 1. Open the Network Neighborhood folder and select the server being used by the printer. Refer to Client-Server Printing: Server Setup on page 49. 2. Select the printer, and
Section 5: Setting Up - OS/2 60 AXIS 540/640 User’s Manual Share the Print Queue A print queue must be made a shared resource before it can be accessed from other computers (clients or other servers). Open an OS/2 window and issue the following command: NET SHARE <queue_name> /PRINT Where <queue_name> is the name of the queue created above. To sha
Axis 540 series, Section 2: Basic Installation AXIS 540/640 User’s Manual 19 Connecting the AXIS 640/642 to the Token Ring Network Caution DO NOT connect or disconnect the network cabling while the AXIS 640/642 is powered on. 1. Switch off the printer and disconnect the AXIS 640/642 external power supply. 2. Note the AXIS 640/642 serial number found on the underside label of the print server. You need this number during the network configuration. 3. Slide the Ring Speed switch towards 4 or 16 depending on the ring speed of your network. 4. Connect your AXIS 640/642 to
Axis 540 series, Section 7: Setting Up - UNIX 82 AXIS 540/640 User’s Manual Using Telnet with the AXIS 540/640 The Telnet support makes it possible to log in to the AXIS 540/640 and execute various commands as shown in the example below. Use the following command to log in: telnet <host name> Typical Telnet session to display available commands Telnet support: Telnet is a TCP/IP command that allows you to manage a remote system, in this case the AXIS 540/640. The AXIS 540/640 has a number of built in commands that can be executed via Telnet. Recent firmware updates may have changed the commands th
Axis 540 series, Section 1: Introduction AXIS 540/640 User’s Manual 5 Section 1 Introduction The AXIS 540/640 series is a range of plug-in network print servers for use in Ethernet and Token Ring environments. The AXIS 540/640 server plugs directly into the printer’s parallel port and provides all network users with access to shared printer resources. Using state of the art technology the server provides excellent print flexibility and simultaneously supports multiple network protocols. This includes advanced support for TCP/IP, support for NetWare including NDS, and support for over 20 UNIX systems, Windows for Workgroups, Windows 95, Windows NT, and OS/2. The AXIS
Axis 540 series, Section 2: Basic Installation AXIS 540/640 User’s Manual 33 Using BOOTP in UNIX Follow these step-by-step procedure below to use the bootp method: 1. Append the following entry to your boot table. This is typically performed editing the file: /etc/bootptab: Example for AXIS 540/542 /Ethernet: Example for AXIS 640/642 /Token Ring: 2. Update your host table and alias name databases as described previously. 3. If it is not already running, start the bootp daemon. This is typically performed using the command bootpd. 4. Restart the AXIS 540/640 to down-load the Internet address, default router address, and net mask. Notes: ❏ The ht and vm field
Axis 540 series, Section 7: Setting Up - UNIX AXIS 540/640 User’s Manual 73 FTP The File Transfer Protocol is used for transferring files between hosts. Advantages: Uses industry standard network software on the host. Limitations: No printer status logging. In the case of BSD it may conflict with other input or output filters and does not allow both input and output filters. In System V no filters or interface programs can be used. PROS A protocol developed at Axis. Comes in two versions; named pipe (PROS A) and filter (PROS B). PROS A PROS A - Advantages: The AXIS 540/640 appears as a device to the system. This makes all filter and model options avai
Axis 540 series, Section 4: Setting Up - Windows 56 AXIS 540/640 User’s Manual Other Windows Configuration Methods AXIS NetPilot After installing your printers using the AXIS Print Utility for Windows adjustments to the AXIS 540/640 configuration can be made at any time using the AXIS NetPilot. Web Browser If your network supports TCP/IP, you may alternatively configure the AXIS 540+/542+/640 and 642 models for operation within the Windows environment, using any standard Web browser. Any Windows parameter in the Configuration file may be amended from within the NetBIOS/NetBEUI Configuration Page. Refer to Section 8 - Web Based Management for further
Section 7: Setting Up - UNIX 84 AXIS 540/640 User’s Manual Viewing the AXIS 540/640s Status using Telnet The status command shows which printer port the logical printers are assigned to, and their current status. Typical Telnet session to view logical printer status Note: ❏ Since the print server supports HTTP, the accounting of the AXIS 540/640 may also be viewed
Axis 540 series, Section 1: Introduction AXIS 540/640 User’s Manual 7 The AXIS NetPilot software, which is supplied on the AXIS Utilities diskette, makes the job of installation and configuration quick and convenient. AXIS NetPilot runs on Windows platforms, and provides a quick installation facility so that the AXIS 540/640 can be rapidly put to use. Together with the supplied AXIS Utilities, it provides user friendly facilities to tune the configuration, allowing you to maintain optimum printing performance as you make changes to the network. For more detailed information that is not included in this manual, you are invited to visit our WWW Home Page where you can down-load fur
Axis 540 series, Section 7: Setting Up - UNIX AXIS 540/640 User’s Manual 85 Using SNMP for Remote Monitoring You may use SNMP (Simple Network Management Protocol) for remote monitoring of the AXIS 540/640. All major functions applicable to print servers are supported. General Information SNMP actually refers to a set of standards for network management, including a protocol, a database structure specification, and a set of data objects. The AXIS 540/640 SNMP implementation runs in the TCP/IP environment. The actual management
Axis 540 series, Section 6: Setting Up - Macintosh 68 AXIS 540/640 User’s Manual Web Browser If your network supports TCP/IP, you may alternatively configure the AXIS 540+/542+ using an appropriate Web browser. Any AppleTalk parameter in the AXIS 540+/542+ Configuration file may be amended from within the AppleTalk Configuration Page. Refer to Section 8 - Web Based Management for further information. The AXIS 540+/542+ AppleTalk Configuration Page AXIS NetPilot If you have a Windows platform connected to your network you may wish to install and manage the AXIS 540+/542+ using the AXIS NetPi
Appendix D: Technical Specifications AXIS 540/640 User’s Manual 111 AXIS 542/542+ 1.1 x 2.9 x 4.7 inches (2.7 x 7.2 x 11.8 cm) AXIS 640/642 1.1 x 2.2 x 4.7 inches (2.7 x 5.6 x 11.8 cm) Weight 0.26 lb. (0.12 Kg) Environmental Temperature: 40 - 105° F (5 - 40° C). Humidity: 10 - 95% non-condensing. Approvals EMC: EN 55022/1987, EN50082-1/1992. FCC Class A. Safe
Axis 540 series, Appendix D: Technical Specifications 110 AXIS 540/640 User’s Manual Logical Connection AXIS 540/542 Running simultaneously any combination of the supported protocols. Use of IEEE802.2, IEEE802.3, SNAP and Ethernet II frame types simultaneously. AXIS 640/642 Running simultaneously any combination of the supported protocols. Use of IEEE802.2 and IEEE802.5 (with Early Token release support for 16 Mbps), frame types simultaneously. Attachments AXIS 540/540+ 10baseT (Twisted Pair) Ethernet. AXIS 542/542+ 10base2 (Thin) Ethernet. AXIS 640 Media type 3/RJ45/UTP. Support for 4 and 16 Mbps Token Ring networks. AXIS 6
Axis 540 series, Section 1: Introduction AXIS 540/640 User’s Manual 11 Security You may set up passwords for all users, restricting both log in and printer access. Monitoring The AXIS NetPilot software provided allows you to continuously monitor printer status. The AXIS 540/640 also supports SNMP for remote monitoring. Futureproof The AXIS 540/640 has the ability to have its Flash memory updated. This allows you to quickly update and enhance the operational features of your AXIS 540/640 when new print server software becomes available. All software updates are free of charge. You may perform the update operation over the network which makes the jo
Axis 540 series, Appendix A: The Test Button AXIS 540/640 User’s Manual 95 Appendix A The Test Button The Test Button is located on the front right hand side of the AXIS 540/640. By depressing this button you are able to: • Print a test page, to check the connection to the printer. • Print a parameter list, to define the current settings within your AXIS 540/640. • Reset the AXIS 540/640 parameters to the original factory default settings. The functionality of the Test Button is determined by the power status of the AXIS 540/640 and the number of times the button is depressed. A description of these functions complete with instructions for their i
Axis 540 series, Appendix E: How To Contact Axis AXIS 540/640 User’s Manual 113 L u n d - B o s t o n - T o k y o COMMUNICATIONS ® Appendix E How To Contact Axis Technical Support Should you require any technical assistance, please contact your Axis dealer. If your questions can not be answered immediately, your Axis dealer will forward your queries through the appropriate channels to ensure that you get an expedient response. Internet and World Wide Web If you are connected to Internet, please take the time to look at the Axis WWW Home Page at http://www.axisinc.com/ or http://www.axis.com/. Here you can find information about the company and our product
Axis 540 series, Appendix E: How To Contact Axis 114 AXIS 540/640 User’s Manual L u n d - B o s t o n - T o k y o COMMUNICATIONS ® FTP You may also obtain files and information through anonymous ftp: log in to ftp.axisinc.com or ftp.axis.com and go to the /pub/axis directory. Alternatively, enter ftp://ftp.axisinc.com/pub/axis or ftp://ftp.axis.com/pub/axis in your WWW browser. The Axis Bulletin Board System Another way to access the Axis archive is the Axis BBS. You will need a high-speed modem, a VT100 or VT220 terminal emulator and a Kermit or ZModem compatible software. Dial
Axis 540 series, Section 7: Setting Up - UNIX 70 AXIS 540/640 User’s Manual Integration into the Host Printer Spooler To integrate the AXIS 540/640 into the host printer spooler you will need to use the auto installation script axinstall, resident in the AXIS 540/640. You may install this software onto your host using FTP. To do this, login to the AXIS 540/640 with this command: where host name is the name assigned in your system host table, (e.g. salesdept). You will be prompted for user id and password. Use the user id root, which has the default password pass (root is t
Axis 5400plus Printer Installation manual
5400plus |
Axis 560 Printer Operation & user’s manual
560 |
Axis 5550 Printer Installation manual
5550 |
Axis 5570e Printer Operation & user’s manual
5570e |
Axis 540 series Printer Operation & user’s manual
540 series |
Axis 1650 Printer Operation & user’s manual
1650 |
Axis 540 series Printer Operation & user’s manual
540 series |
Axis 27978R1 Printer Operation & user’s manual
27978R1 |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Mercedes-Benz | 2000 C-Class | Operator's manual | mercedes-benz/2000-c-class-BL3.pdf | 07 Jul 2023 | 130 | |
2 | Fiberstars | 6004 SERIES | Installation manual | fiberstars/6004-series-29C.pdf | 27 Jan 2024 | 4 | |
3 | JVC | HR-J785EK | Instructions manual | jvc/hr-j785ek-BK5.pdf | 01 Feb 2023 | 64 | |
4 | Elo TouchSystems | 15A2 | Quick installation manual for wireless card | elo-touchsystems/15a2-4N8.pdf | 12 Aug 2023 | 1 | 0.51 Mb |
5 | Cooper Lighting | Combo Trimless Series LV-216-TR | Installation instructions | cooper-lighting/combo-trimless-series-lv-216-tr-6C6.pdf | 30 Mar 2023 | 1 | 0.49 Mb |
6 | Scitec | HDST-12 | Datasheet | scitec/hdst-12-PL3.pdf | 03 Sep 2022 | 1 | 0.09 Mb |
Atexco
Model S High Speed Sublimation printer 1 Model S High Speed Sublimation printer User manual Ver 1.0 April, 2019 Hangzhou Honghua Digital Technology Stock Co., Ltd. Address: 3911 Binsheng Road, Binjiang District, Hangzhou Postal Code (PC): 310052 TEL:+86-0571-88866678 FAX:+86-0571-88852900 E-Mail:honghua@at …
S(57 pages) |
Oki
Notice:When using paper smaller than A4 or Letter size, load the tray with 250 sheets (maximum) for best performance.Notication:Pour utiliser un format de papier plus petit que A4 ou lettre, chargez le bac avec au plus 250 feuilles an d’obtenir les meilleurs résultats.Aviso:Para lograr el mejor rendimiento de su impresora, coloque 250 hojas (máximo …
C830dn(1 pages) |
Epson
Page 1 of 2PSB.2007.04.001EPSON Product Support BulletinDate: April 2, 2007 Originator: VSPSB #: PSB.2007.04.001 Authorization:Reference: TI 06-0491 Rev.B Total Pages: 2Product(s): Expression 10000XL/1640 XL/1680/1600/800/836 XL, Perfection3490/3590/4490/V700/V750/V100/V350/1240U/1250/1260/1640/1650/1660/1670/2400/2480/2580/3170/3200/4180/4870/4990/640U/12 …
836XL - Expression - Flatbed Scanner(14 pages) |
Ricoh
Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=88 // Print scale=81%Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 3.520000 mmSetup GuideSetup GuideRICOH COMPANY, LTD.15-5, Minami Aoyama 1-chome,Minato-ku, Tokyo 107-8544, JapanPhone: +81-(0)3-3479-3111Setup GuideFor safety, please read this manua …
AP2610N(472 pages) |
Ricoh
Paper type: Wood Free 80g/m2, Paper Thickness=100 µm // Pages in book=188 // Print scale=81%Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 9.400000 mm 2232C/2238C Operating Instructions General Settings Guide 2232C/2238C Operating Instructions General Settings GuideRICOH COMPANY, LTD.15-5, Minami Aoyama 1-chome,Minato-ku, Tok …
Aficio 2232C(191 pages) |
Lexmark
Information guideHelp menuThe Help menu consists of a series of Help pages that are stored in the multifunction printer (MFP) as PDFs. They containinformation about using the printer and performing various tasks, including copying, scanning, and faxing.English, French, German, and Spanish translations are stored in the printer. Other translations are availab …
734de - X Color Laser(1 pages) |
Bose Headphone Aviation Headset XUser Manual: Bose Aviation Headset X (C9OXIH, Upd.09/01/2024) Aviation Headset X, 1 |
Texas Instruments Amplifier TPA3200D1#TM1413: TPA3200D1 Amplifier Owner's manual TPA3200D1, 29 |
HP Printer Deskjet 3840 SeriesHP Deskjet 3840 Series Printer Setup poster Deskjet 3840 Series, 1 |
Unitech Handhelds PA700Unitech PA700 Guide (Doc Type: Handhelds Operation & user’s manual) PA700, 29 |
INSTEON Switch SWITCHLINC 2476S#YS7Y36 SWITCHLINC 2476S: INSTEON Switch Owner Documentation SWITCHLINC 2476S, 2 |
Agilent Technologies Multimeter U1252BMultimeter PDF User's manual and service manual U1252B, 191 |
Wheelock Speakers TGM-300Wheelock TGM-300 User Manual (Installation instructions), @1AJU76 TGM-300, 5 |
Haier Air Conditioner HSU-09R04Haier Air Conditioner HSU-09R04 Operation manual HSU-09R04, 19 |
Marantz Receiver SR6006Marantz SR6006 Guide (Getting started manual), @YOA482 SR6006, 15 |
Screen Research Projection Screen MS2Installation manual for Screen Research MS2 Projection Screen MS2, 11 |
TQ-Systems Transmitter MODUL NO.1TQ-Systems Product User Guide: MODUL NO.1 PDF Operating instruction - 7U5PE5 MODUL NO.1, 20 |
ProForm Other 890 E Elliptical890 E Elliptical (Other ePDF User Manual, #B64734) 890 E Elliptical, 32 |