Alpha WMP-ND03B Operation & User’s Manual

Text of Alpha WMP-ND03B User Guide:

• Alpha WMP-ND03B, This document contains confidential proprietary information and is the property of Alpha Networks Corporation. The contents of this document may not be disclosed to unauthorized persons without the written consent of Alpha Networks Corporation. Company Confidential

• Alpha WMP-ND03B, Revision History Rev. Date Author Reason for Changes 1.0 2008/3/14 Alfred Chin • New release 1.1 2008/6/12 Alfred Chin • Add band 4 (5725~5850MHz) in item 2.2.1.3 and 2.2.4.3 Company Confidential

• Contents TEST OPERATION MANUAL.................................................................................................................5 Test Utility Installation:.........................................................................................................................5 Configuration:..................................................

• Alpha WMP-ND03B, Test Operation Manual Test Utility Installation: 1. Unzip “ART_V0_5_b25ALL.zip” to “C:\”. 2. The utility must run on Win2000 or WinXP. Hardware Installation: Before insert the card, please execute the below instruction at first !! 1. Win2000 OS : Enter in the directory : C:\ v0_5_b25ALL\art_driver\bin\2000 Execute the uninst_new_drv_2k.bat: Execute the inst_new_drv_2k.bat : WinXP OS : Enter in the directory : C:\ v0_5_b25ALL\art_driver\bin\xp Execute the uninst_new_drv_xp.bat: Execute the inst_new_drv_xp.bat 2. Insert the card, then install the driver , the driver is locat

• Alpha WMP-ND03B, Configuration: 1. Enter the DOS command mode , then change the directory to : C:\ v0_5_b25ALL\art_driver\bin\xp 2. Input the instruction: art \id=2082 Then press enter . ART TEST MODE: 1. Once utility is executed, a menu with test options will appear. To run a test, press the character key that is assigned to the test option. For example, press “c” to run the continuous transmit test, or press “r ” to run the continuous receive test. For example: press “o” to change 11g or 11b test mode, Press “c” to continuous transmit mode . 2. C

• 3. Continuous Receive Options Continuous receive options will put the radio into receive mode to allow for radio measurements. Press ESC to return to the main Test Options menu when finished. 1.0 Scope 1.1 Document This document is to specify the product requirements for 802.11 a/b/g/n Mini-PCI Card. This Card is based on Atheros chipset that

• Alpha WMP-ND03B, data rate Ÿ Compatible with IEEE 802.11 draft n standard to provide wireless 300Mbps data rate Ÿ Maximum reliability, throughput and connectivity with automatic data rate switching Ÿ Supports infrastructure networks via Access Point and ad-hoc network via peer-to-peer communication 2.0 Requirements The following sections identify the detailed requirements of the 802.11n/ a or g/b Mini-PCI Card. 2.1 General Requirements 2.2.1 IEEE 802.11a Section # Feature Detailed Description 2.2.1.1 Standard Ÿ IEEE 802.11a 2.2.1.2 Radio

• 2.2.2 IEEE 802.11b Section # Feature Detailed Description 2.2.2.1 Standard Ÿ IEEE 802.11b 2.2.2.2 Radio and Modulation Schemes Ÿ DQPSK, DBPSK, DSSS, and CCK 2.2.2.3 Operating Frequency Ÿ 2400 ~ 2483.5MHz ISM band 2.2.2.4 Channel Numbers Ÿ 11 channels for United States/ Canada/ Taiwan 13 channels for Europe Countries/ Japan 2.2.2.5 Data Rate Ÿ 11, 5.5

• Alpha WMP-ND03B, 2.2.4 IEEE 802.11 Draft n Section # Feature Detailed Description 2.2.4.1 Standard Ÿ Draft n 2.2.4.2 Radio and Modulation Type Ÿ BPSK, QPSK, 16QAM, 64QAM with OFDM 2.2.4.3 Operating Frequency n CE: 240 ~2483.5MHz , 5150~5350MHz, 5470MHz ~5725MHz n C-Tick: 2400~2483.5MHz , 5150~5350MHz, 5470MHz ~5725MHz, 5725MHz ~5850MHz n FCC: 2400~2483.5MHz , 5150~5250MHz, 5725MHz ~5850MHz n IC: 2400~2483.5MHz , 5150~5250MHz, 5725MHz ~5850MHz n Taiwan NCC: 2400~2483.5MHz , 5250~5350MHz, 5725MHz ~

• Alpha WMP-ND03B, # Feature Detailed Description n 5GHz Band/HT-20 Ÿ –84dBm at MCS0/8 Ÿ –84dBm at MCS1/9 Ÿ –82dBm at MCS2/10 Ÿ –79dBm at MCS3/11 Ÿ –77dBm at MCS4/12 Ÿ –73dBm at MCS5/13 Ÿ –72dBm at MCS6/14 Ÿ –69dBm at MCS7/15 n 5GHz Band/HT-40 Ÿ –81dBm at MCS0/8 Ÿ –81dBm at MCS1/9 Ÿ –79dBm at MCS2/10 Ÿ –76dBm at MCS3/11 Ÿ –74dBm at MCS4/12 Ÿ –70dBm at MCS5/13 Ÿ –69dBm at MCS6/14 Ÿ –66dBm at MCS7/15 Connector n 2.4GHz Band/HT-20 Ÿ –85dBm at MCS0/8 Ÿ –85dBm at MCS1/9 Ÿ –83dBm at MCS2/10 Ÿ –80dBm at MCS3/11 Ÿ –78dBm at MCS4/12 Ÿ –74dBm at MC

• Alpha WMP-ND03B, 2.3 Compatibility Requirements This device passes the following compatibility requirements. # Feature Detailed Description 2.3.1 Wi-Fi Ÿ Meet Wi-Fi certification for IEEE 802.11a/b/g/draft n product 2.3.2 WHQL Ÿ Meet applicable WHQL certification requirements 2.3.3 Physical Layer and Functionality Ÿ Meet Alpha Networks Engineering Test Plan and Test Report 2.4 Regulatory Requirements # Feature Detailed Description 2.4.1 United States IEEE 802.11a/n: EMI: FCC Part 15.407(b) Power Limits: FCC Part 15.407(a) IEEE 802.11b/g/n: FCC part 15.247, 15.205, 15.209 Safety:

• Alpha WMP-ND03B, 2.5 Requirements of Reliability, Maintainability and Quality # Feature Detailed Description 2.5.1 MTBF Ÿ Mean Time Between Failure > 30,000 hours 2.5.2 Maintainability Ÿ There is no scheduled preventive maintenance required 2.5.3 Quality Ÿ The product quality is followed-up by Alpha Networks factory quality control system 2.6 Environmental Requirements # Feature Detailed Description 2.6.1 Operating Temperature Conditions Ÿ The product is capable of continuous reliable operation when operating in ambient temperature of 0 ℃ to +40℃. 2.6.2

• Alpha WMP-ND03B, Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferen

• Alpha WMP-ND03B, band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authoriza

• Alpha WMP-ND03B, Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. Because high power radars are allocated as primary users (meaning they have priority) in 5250-5350 MHz and 5650-5850 MHz, these radars could cause interference and/or damage to license exempt LAN devices. In order to protect Environment Canada weather radars operating in the band 5600-5650 MHz, this device will not transmit on any channels operating in the band 5600-5650 MHz, IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC radiation exposur

• Alpha WMP-ND03B, integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate IC authorization. End Product Labeling The final end product must be labeled in a visible area with the following: “Contains TX IC : 4833A-WMPND03B”. Manual Information That Must be Included: The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove. This RF module in the user’s manual of the end product which integrates this module. The user’s manual for OEM Integrators must include the following information i

Related Products and Documents (PCI Card):

Comparable Devices:

Similar Resources:

• Nat NAT-MCH (32 pages) NAT-MCH BASE-Module – Technical Reference Manual NAT-MCH TCA Telecom MCH Module Technical Reference Manual V 2.10 BASE-Module HW Revision 3.1 to 3.5 …

• ICP DAS USA PISO-DA4U (8 pages) PEX-DAx/PIO-DAxU/PISO-DAxU Quick Start Guide ICP DAS CO., LTD. 1 WebSite: http:// www.icpdas.com.tw E-Mail: [email protected] , [email protected] The package includes the following items: One PEX-DA, PISO-DAxU and PIO-DAxU series board as follows: PEX-DA series: PEX-DA4, PEX-DA8, PEX-DA16 PISO-DAxU series: PISO-DA4U …

• Advantech PCI-1711 (60 pages) CopyrightThis documentation and the software included with this product arecopyrighted 1999 by Advantech Co., Ltd. All rights are reserved.Advantech Co., Ltd. reserves the right to make improvements in theproducts described in this manual at any time without notice.No part of this manual may be reproduced, copied, translated ortransmitted in any form or by a …

• D-Link DCS-1000 (3 pages) D-Link UpLink NewsletterJanuary 2002 >>>>>>>>>>NEW D-LINK PRODUCTS<<<<<<<<<< NEW YEAR, NEW PRODUCT RELEASES FROM D-LINK D-Link begins the New Year with several new product releases including a new line of 802.11a Wireless Networking products (a faster, next-generation standard) along with several …

• TRENDnet TEW-226PC (11 pages) English TEW-226PC/TEW-228PI Quick Installation Guide V1.10 08182003 This Installation Guide will lead you through the installation of CardBus/PCI Wireless Adapter and the configuration utility. To establish your wireless network connection, the following steps should be executed. 1. Install the software using the installation CD. 2. Install the Ad …

• SIIG LB-GE0114-S1 (4 pages) 104-1056A Gigabit Ethernet PCIe 4-Lane CardIntroductionThe Gigabit Ethernet PCIe 4-Lane Card adds GigabitEthernet ports to your PCIe-enabled server ordesktop systems.Specifications• Bus connector: PCI Express x4• Version: PCI Express 2.1• Network transfer rate: 10/100/1000 MbpsSystem Requirements• Desktop PC with one available PCIe slot• Windows® …

Comments, Questions and Opinions: