Manualios.com

Ag Leader Technology PF3000 Operator's Manual

Ag Leader Technology PF3000 Manual Online:

4.85, 2877 votes
Ag Leader Technology PF3000 User Manual
Ag Leader Technology PF3000 User Guide
Ag Leader Technology PF3000 Online Manual

Text of Ag Leader Technology PF3000 User Guide:

  • PF3000 Cotton Yield Monitor Ag Leader Technology Diagnostics March 2002 4 - 17 Introduction The diagnostic screens provide troubleshooting and reference information for the PF3000. Order of Keys (Harvest Mode) Press the MENU key until you see the following keys on the display. Press the DIAG k

  • Ag Leader Technology PF3000, PF3000 Cotton Yield Monitor Logging Map Data on Card Ag Leader Technology March 2002 4 - 12 Type of Card Log file criteria SANDISK ATA FLASH card A new log file must be created for each day. Can not add to an old log file after a new file has been created. Can store multiple log files on one card. In order to log instantaneous GPS data or copy field and load data to a memory card, a log file must be selected. The monitor will prompt you when you turn it on to select or create a log file. Refer to the steps below to select/create a log file after you h

  • Ag Leader Technology PF3000, PF3000 Cotton Yield Monitor Ag Leader Technology Swath Setup March 2002 2 - 15 Introduction NOTE: Ensure you have set the number of rows for your cotton picker on the Picker Configuration line of the Vehicle Setup screen before completing Swath Setup. The swath setup screen is used to set the permanent, full swath of your head. Do not adjust the swath setting on this screen when you encounter a partial swath while harvesting. Refer to the Swath Setting instructions in Operation Section and select swath as a display item and set a partial swath.

  • PF3000 Cotton Yield Monitor Ag Leader Technology Summary February 2001 4 - 27 Introduction The summary screen shows totals and averages for the fields and loads. You can also see the field and load totals on the main operating screen (refer to the display item instructions). You can view items on the summary screen on the go. You should us

  • Ag Leader Technology PF3000, PF3000 Cotton Yield Monitor Area Counting Ag Leader Technology March 2002 4 - 6 Introduction In the bottom right corner of the display, the monitor always displays either: • AREA ON or • AREA OFF The area count switch is located on the bottom right corner of the front panel. The switch manually controls area counting. The header sensor, implement switch or spray booms automatically turns area counting on and off if the area count switch is in the up position. When the switch is in the down position, the monitor displays and flashes "

  • Ag Leader Technology PF3000, PF3000 Cotton Yield Monitor Vehicle Setup Ag Leader Technology March 2002 2 - 8 NOTE: If you want to use a radar gun, contact an Ag Leader Technology dealer and purchase a special adapter cable for your radar gun. Custom Configuration This screen allows you to define where the sensors are located. On the Vehicle Setup screen you defined the make, configuration and the number of rows sensed. The CUSTOM configuration is defined on this screen. The number of rows displayed on this screen is defined by the Picker Configurat

  • Ag Leader Technology PF3000, PF3000 Cotton Yield Monitor Ag Leader Technology Troubleshooting March 2002 6 - 9 Problem Cause Solution Monitor Does not Find Correct Number of Flow Sensors on Initial Power Up. Cables not connected Check all cable connections. System checks out OK initially but monitor cannot find the sensors later. Try cycling the power to the monitor. Flow sensor cable damage Check all cables for damage. Problem in wiring Trade flow sensor with another. If the problem stays in the same location, the problem is in the wiring. Damaged flow sensor Trade flow sensor with another. If the problem moves with the fl

  • PF 3000 Cotton Yield Monitor System Wiring Ag Leader Technology March 2002 7 - 6 Signal PF3000 Cab / Distrib. Power Ground Spd Fan Spd Flow Header Rectangular Round Rectangular Rectangular Rectangular Round Rectangular Radar 25 pin 24 pin 3 pin 2-pin 2 pin 4 pin 3 pin 4-pin Power (14V)(US) 1 1 A RS(485C)

  • Ag Leader Technology PF3000, PF3000 Cotton Yield Monitor Ag Leader Technology Index March 2002 10 - 1 A Ag Leader Technology-Fax Number .................................... 1-2 Ag Leader Technology-Mailing Address ............................. 1-2 Ag Leader Technology-Phone Number ................................ 1-2 Alarm Activation .................................................................. 4-29 Area Calibration Number ..................................................... 3-12 Area Count Stop Beeps ................................................... 2-7, 4-5 Area Count Switch ......................................

  • Ag Leader Technology PF3000, PF3000 Cotton Yield Monitor Ag Leader Technology Troubleshooting March 2002 6 - 7 Problem Cause Solution Incorrect Distance and MPH (cont.) Distance and acre counting is not activated because AREA OFF is displayed. Move Area count switch to up position and the stop height number is set high enough so that when the head is lowered, AREA OFF changes to AREA ON. See "AREA OFF Always Displayed", in this section. Ground Speed Sensor has no signal or signal is erratic. Refer to Installation Instructions to ensure that the machine ground speed sensor is installed correctly. Check machine ground speed readout while driving. Disconnect the gr

  • Ag Leader Technology PF3000, PF3000 Cotton Yield Monitor Fields and Loads Ag Leader Technology March 2002 4 - 2 Recommendations All the information recorded by the PF3000 must be recorded in a field and load. The field and load that the monitor is set on is found on the top line of the main operating screen. Fields You should at least create all the fields and name them before you begin to use the PF3000. You can create and name your fields using any operating mode. You should choose field names that you can use year aft

  • Ag Leader Technology PF3000, PF3000 Cotton Yield Monitor Ag Leader Technology Card Setup March 2002 2 - 11 Changing a Setting Step Action 1 Use the UP or DOWN ARROW keys to select the item you want to change. The item is selected when a black filled rectangular box surrounds the entire line. 2 Press the EDIT key and then use the UP or DOWN ARROW keys to change the number or setting. 3 Once you have changed a setting press the ACCEPT key. Press the EXIT key once you have made all the settings. Logging Device If you are using a GPS receiver with the PF3000 you must use a memory card to save the instanta

  • Ag Leader Technology PF3000, PF3000 Cotton Yield Monitor Creating, Naming Fields, & Loads Ag Leader Technology March 2002 2 - 22 Creating and Step Action Naming Loads 1 Press the MENU key until the following is displayed on the bottom of the display. FIELD LOAD SHOW MAP MARKS 2 Press the LOAD key twice to view the screen below.

  • Ag Leader Technology PF3000, PF3000 Cotton Yield Monitor Ag Leader Technology Checking Data Accuracy March 2002 4 - 37 Acres Check the number of acres for each field and load, ensuring they are correct. If you know the exact number, you can set the field acres that the monitor measured to the exact number of acres in the field. You can also change the load acres. Refer to the Acre Calibration instructions in the Acre Counting section for more information. IMPORTANT: If you are using multiple harvesters to harvest one field, DO NOT adjust the acre count for that field on the harvester monitors. If you change the acre count i

  • Ag Leader Technology PF3000, PF3000 Cotton Yield Monitor Ag Leader Technology Calibrating Area March 2002 3 - 13 Calibration Step Action Procedure 1 Change the field to a field for which you know the exact area. Select (rectangular box surrounds line) the field by pressing the key to the right of the line displaying field. Use the UP or DOWN ARROW keys to change the field. 2 Select the "Actual Area" line by pressing the key to the right of the line displaying actual area. Use the UP or DOWN ARROW keys to set the actual area. 3 Press the PERFORM CAL

  • Ag Leader Technology PF3000, PF3000 Cotton Yield Monitor Ag Leader Technology Compatible Hardware March 2002 7 - 3 Radar Guns Below are listed compatible radar guns: Dickey-john Magnavox MicroTrak sonar gun Case IH Magnum John Deere * * *

  • Ag Leader Technology PF3000, PF3000 Cotton Yield Monitor Marker Setup Ag Leader Technology March 2002 2 - 18 Changing a Setting Step Action 1 Use the UP or DOWN ARROW keys to select the mark. The mark is selected when a black filled rectangular box surrounds the entire line. 2 Press the EDIT NAME key to rename an existing mark. Use the UP or DOWN ARROW keys to change a character in the name. Use the LEFT or RIGHT ARROW keys to move the cursor over another character within the name. Press the ACCEPT key after you have changed the name. 3 Press the EDIT TYPE key to set the mark for continuous or spot marking. Use the UP or DOWN ARROW keys to change the se

  • PF3000 Cotton Yield Monitor Ag Leader Technology Cal Set Setup March 2002 3 - 5 C1: C1 is the vibration cal number. This number represents some minimum value that the sensors must output before cotton flow is calculated. Any signal below this value will not be recorded and cannot be modified by post calibration. This is the number to be adjusted if a significant am

Related Products and Documents (Monitor):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Samsung CS20Q1 Owner's instructions manual samsung/cs20q1-5HS.pdf 09 Apr 2023 40 1.29 Mb
2 Shiro SC3161 Operation & user’s manual shiro/sc3161-Y21.pdf 09 Apr 2023 8 0.32 Mb
3 BOXLIGHT CP322ia Operation & user’s manual boxlight/cp322ia-4W7.pdf 14 Oct 2023 55 1.32 Mb
4 Dual Sirus XM 2013 Buyer's manual dual/sirus-xm-2013-921.pdf 17 Sep 2022 20 6.49 Mb
5 Craftsman 917.251482 Owner's manual craftsman/917-251482-576.pdf 28 Nov 2023 64 6.9 Mb
6 IC Realtime N6 Series Quick start manual ic-realtime/n6-series-RY5.pdf 12 Jul 2022 30

Similar Resources:

  • AVOCOR

    F series

    (2 pages)
    Thank for your choosing an Avocor F series interactive display. This Quick Start Guide includes easy step by step instructions for you to follow to successfully set up the embedded PC running Windows 10 OS on your new interactive touch screen. It is important that you follow these instructions and don’t deviate from them.Windows 10 Installer Guide Remove t …
  • urmet domus

    1092

    (57 pages)
    + DS1092-543A BALL CAMERA AHD 4M DAY & NIGHT 1/3” OTTICA VARIFOCAL 2,8-12MM CON LED IR 4M AHD DAY & NIGHT BALL CAMERA 1/3” 2,8-12MM VARIFOCAL LENS WITH IR LED AHD 4M TAG & NACHT KUGELKAMERA 1/3-ZOLL 2,8-12MM-OBJEKTIV MIT IR-LEDS CAMÉRA MINI-DÔME AHD 4M DAY & NIGHT 1/3” OPTIQUE VARIFOCAL 2,8-12MM A DIODES IR CÁMARA MINIDOMO AHD …
  • Elo TouchSystems

    15D1

    (2 pages)
    2009 Tyco Electronics.Revision AP/N E811209Installing the Magnetic Stripe Reader (MSR)for the 15D1 TouchcomputerCaution:Before attaching the MSR, make sure that the touchcomputer is powered off.North AmericaElo TouchSystem301 Constitution Drive,Menlo Park, CA 94025www.elotouch.comEuropeTel +32 (0)16 35 21 00Fax +32 (0)16 35 21 [email protected]
  • Marshall Electronics

    V-R72P-2C

    (2 pages)
    V-R72P-2C Instruction SheetMarshallhttp://www.LCDRacks.com e-mail: [email protected] Multimedia DivisionSide View2.5”7” LCDActive Matrix6.07” x 3.41”each panel0.108mm x0.375mm1440H x 234V2 NTSC/PALinputs per panelBuilt into unit19.125W x5.14H x 3.75D12 VDC3.0 AmpsDisplay Viewing Area Dot Pitch Inputs Color Bars DimensionsPictureElementsPo …
  • Resol

    SD3

    (30 pages)
    *11204819*11204819SD3 / SDFKwww.resol.comHandbuchSmart Display SD3 / SDFK (Seite 2) deManualSmart Display SD3 / SDFK (page 7) enManuelSmart Display SD3 / SDFK (page 13) frManualeSmart Display SD3 / SDFK (pagina 19) esManualSmart Display SD3 / SDFK (página 25) it …
  • Philips

    190CW7CS

    (3 pages)
    PhilipsLCD widescreen monitor49 cm (19.1") wideWXGA+190CW7CSBest value for money widescreen LCD monitorEnjoy more with this big widescreen! Experience multiple viewing experiences on a single screen with the Philips 190CW7's fast response time and convenient dual DVI and VGA connectors - all in one easy-to-use, highly affordable package.Outstandi …

Comments, Questions and Opinions: