Afinia H400 Operation & User’s Manual
|
Afinia H400, Afinia 1-Year Limited Warranty Below is the one-year limited warranty included with this Afinia product. Afinia prides itself on its outstanding product line and its technical support. If for some reason, your product fails, Afinia, a division of Microboards Technology, LLC, stands behind its warranty and assures you the best service possible in a quick and timely manner. Afinia warrants to the original purchaser that this product is free from defects in material and workmanship. Afinia will for one year, at its option, repair or replace at no charge for parts and labor from the date you purchased the product from an authorized Afinia reseller. Nozzles and Ce
Afinia H400, Index Chapter 1 Product Description Chapter 2 Prepare for Your First 3D Print Chapter 3 Machine Settings Chapter 4 Print Settings Chapter 5 Calibration and Other Options Chapter 6 Techniques and Troubleshooting
Afinia H400, WIFI Setup through Touch Screen. or Connecting to the Afinia H400 through WIFI requires a Wireless Local Area Net- work (WLAN). Computers , devices, and printers must connect to the same WIFI network (same SSID) in order to communicate. In order to achieve stable WIFI connection, users are recommended to connect under a capacious WIFI environment. A crowded network or an area with a large number of differen
Afinia H400, Touch Screen Control Change printing Material Print a stored project Machine settings including Wi-Fi Printer Info, reset to factory and choose language Nozzle Height Detection Initialize the printer Nozzle Temperature WIFI Status Remaining material Platform Temperature Private setting status Printer status 2-7
Afinia H400, WIFI Setup (Software) 3-6 4\ Input the password for the WIFI network. 5\ If “Private” is set to ON, a private password could be optionally added to limit printer WIFI access to trusted users. Please note that the password is a weak protection that can be accessed and changed by anyone who can connect the machine through USB. 6\ Printer Tab Disconnect USB and choose available printers on the network to operate through WIFI. H480-01 H480-02 your_network
Afinia H400, Print a Model Make sure printer is connected to computer through USB or WIFI (go to section 3-1 for details about WIFI setting) and load a model. Click print button to open the print interface Set Layer Thickness Select Infill Type Select Print Quality/Speed Advanced Options Shell: No infill, Surface: No Hollow Big Hole Loose Fill Solid Fill normal wall. top and bottom layers, no infill, single perimeter. When the s
Safety Precautions 1\ The Afinia H400 3D printer requires the power adapter provided by the original manufacturer, otherwise the machine could become damaged or cause a hazard. Please keep the power adapter away from water and out of high temperature environments. 2\ During printing, the nozzle of the printer will reach 260°C and the print platform could reach over 7
Afinia H400, Filament Spool Holder Spool Hold Lid Filament Guiding Tube Filament Filament Spool Tool Drawer 1-3
Afinia H400, Reprint or Printing Stored Print Jobs Info of the stored file print job Start Printing T est001 T est002 Stored file name Change Page Black Out Recovery If electricity is lost during printing, the print job can be continued after resuming power. NOTE: Do not remove the print job from the platform after the power failure. When the machine turns on again, initialize the printer. The printer will ask whether the user would like to recover the interrupted print job. 2-16
Afinia H400, Printing Progress Print job progress Pause print job After pressing the pause button, the nozzle will be paused but the temperature is maintained at the printing temperature. While paused, the following control buttons will appear to allow users to resume, stop, or change filament. Please note that stopping is irreversible, the current print job cannot be restarted. Extrude Resume Stop Print Job Retract
WIFI Setup (Software) 3-5 3\ Click network to choose an available network (user can also use the touch screen panel to setup a WIFI connection). Choose your network from the drop down list. H400 - 40001234 your_network H400 - 40001234 your_network your_ne
Afinia H400, Prepare for Printing - Load Filament 2-9 Install the filament and guiding tube shown in blue. To printer Push the guiding tube into the rubber ring as shown above.
Afinia H400, Software Interface Printer Status Other Options Home Load File Print Initialize Calibrate Maintenance Build Platform Model Adjustment Wheel Move Mirror Back to Menu 1 Rotate Auto Place Scale To Menu 2 Merge Fix Save Delete Undo View Angles Undo Reset Menu 1 Menu 2 2-5
Afinia H400, Product Description Front Side Magnetic Top Lids Back Door Front Door Handle LCD Touch Screen Initialization Button Back Side Filament Insertion Hole Back Door Power Switch Power Supply Connector USB Connector 1-2
Afinia H400, The printer was calibrated before leaving the factory, but users are recommended to update the nozzle height value using the automatic nozzle height detection function on the touch screen before the first print. Press the “Calibrate” button to enter Nozzle Height setup page. Press the “Auto” button to start the automatic process. 128 Auto During nozzle height detection, the print head nozzle will touch the nozzle detector to make the measurement. 2-8P
Afinia H400, Prepare for Printing - Load Filament 1\ Insert the filament from the spool into guiding tube; arrange the guiding tube as shown in previous page. Press the Material button on the touch screen. 1\ 2\ 3\ 2\ Choose the printing material as ABS by press the Wheel button to switch between different materials input the filament weight by using the +/- buttons. 3\ Click "Extrude." The print head will start to heat up, within 3 minutes. Its temperature will reach 260°C, then the printer will beep and the print head will start to extrude. 4\
Install Studio Download the Studio software by going to www.afinia.com/support/downloads, then install it on your computer. Minimum hardware requirements Intel Pentium 4 or better CPU 4GB RAM Display card support OpenGL 2.0 Software 2-4
Afinia H800+ 3D Printers Operation & user’s manual
H800+ |
Afinia H800+ 3D Printers Quick start manual
H800+ |
PP3DP UP! 3D Printers Quick start manual
UP! |
Afinia H400PLUS 3D Printers Operation & user’s manual
H400PLUS |
Afinia H800+ 3D Printers Installation & setup manual
H800+ |
Stratasys F170 3D Printers Operation and maintenance manual
F170 |
Tinkerine Studio Ditto Pro 3D Printers Quick start manual
Ditto Pro |
Geeetech prusaI3 pro C 3D Printers Operation & user’s manual
prusaI3 pro C |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Tascam | CD-200iL | Product spec sheet | tascam/cd-200il-8SC.pdf | 07 Aug 2023 | 3 | 0.22 Mb |
2 | JUMO | dTRANS T02j | Operating instructions manual | jumo/dtrans-t02j-Y4W.pdf | 01 Jul 2022 | 24 | |
3 | Fujitsu | XG2600 | Hardware manual | fujitsu/xg2600-4Y7.pdf | 22 Apr 2023 | 59 | 3.79 Mb |
4 | Kenwood | KDC-MP425 | Service manual | kenwood/kdc-mp425-72W.pdf | 17 Oct 2022 | 34 | |
5 | Samsung | SGH-Q208 | Service manual | samsung/sgh-q208-1RB.pdf | 04 Apr 2023 | 46 | |
6 | LG | 5250 - - 52" LCD TV | Specification | lg/5250-52-lcd-tv-C5A.pdf | 12 Feb 2024 | 2 |
Renkforce
System21354213 4WerkzeugeDruckenPositionLüfter Stop TonTemperatur FilamentDrucktischZurück3D-Drucker, vormontiertNetzteil und Netzkabel (Wechselstrom)Flexible MagnetunterlageSechskantschlüssel (2,5 mm)Kleine Nadel (0,3 × 75 mm)KartenlesegerätFilamentröhrchenmicroSD-KarteSchaft des ExtrudersSpulenhalterung{ KurzanleitungBasic 3 3D-Drucker, vormontiertBe …
Basic 3(4 pages) |
Wombot
Controlled Document – Wombot Drafter Kit Manual V1.3 1 | P a g e Personal 3D Printer Kit Assembly Manual
…
Drafter(69 pages) |
Fusion3 Design
1 Operation Guide F306 Generation I Revision 4 | 08-27-2014 Table of Contents 1. Introduction ................................................................................................................................................................... 2 1.1. Warnings ................................................................................ …
F306(42 pages) |
Dremel
2610Z10167 11/2019 All Rights ReservedOriginal instructions 2Übersetzung der Originalbedienungsanleitung 32Traduction de la notice originale 63Traducción de las instrucciones originales 94Tradução das instruções originais 125Traduzione delle istruzioni originali 156Vertaling van de originele gebruiksaanwijzing 187Oversættelse af betjeningsve …
3D40 FLEX(588 pages) |
Anet
Extruder presenttemperatureHot bed present temperatureHot bed intendedtemperaturePrint speedFan speedExtruder intendedtemperatureTemperature setupHot bed /Extruder Print speed /Fan speedTotal print timefrom the beginningCancel printing Print / PauseSpeed setupLoad / unload filamentPrint completion percentageFile nameParameter interface(only 9 parameters)Aut …
ET5 X(2 pages) |
Ender
◆ This guide is for the Ender 3 3D printer. ◆ Select the correct input voltage to match your local mains (220V or 110V)◆ Because of software/hardware upgrades and model differences, new revisions may not be listed in this guide. ◆ Detailed instructions for use are available on the SD card.Ender 3 3D PrinterInstructions for assembly
…
3 Series(16 pages) |
Vinotemp Wine Cooler VT-45Instruction manual for Vinotemp VT-45 Wine Cooler VT-45, 14 |
Canon Camcorder DC50Canon DC50 User Manual (Doc Type: Camcorder Specifications) DC50, 2 |
Siemens Refrigerator KI30E440Siemens Refrigerator KI30E440 User manual manual KI30E440, 133 |
Asus Motherboard ApplicationAsus Application User Guide (Doc Type: Motherboard Operation & user’s manual) Application, 8 |
Velodyne Subwoofer IMPACT IMPACT-10User Manual: Velodyne IMPACT IMPACT-10 (5Z3T7A, Upd.21.09.2023) IMPACT IMPACT-10, 20 |
Jenn-Air Cooktop JER8895BASJenn-Air Cooktop Use and care manual (File: jensen-jer8895bas-30-electric-double-oven-range-use-and-care-manual-24, 16th Sep 2023) JER8895BAS, 24 |
Brookstone Keyboard BluetoothBrookstone Keyboard Bluetooth Owner's manual Bluetooth, 12 |
Clifford Car Alarm Wallet Card L1Wallet Card L1 Quick start - 4F5OAO Wallet Card L1, 2 |
Olympus Digital Camera C-700 - CAMEDIA Ultra ZoomPocket manual for Olympus C-700 - CAMEDIA Ultra Zoom Digital Camera C-700 - CAMEDIA Ultra Zoom, 2 |
Panasonic Accessory AWEX500N - SIGNAL CONVERTERAccessory Operating instructions manual (Panasonic AWEX500N - SIGNAL CONVERTER) AWEX500N - SIGNAL CONVERTER, 20 |
Crane Heater EE-8068,R,WEE-8068,R,W (Heater ePDF User Guide, #5W3Y46) EE-8068,R,W, 10 |
Snapper Lawn Mower 6-0941Lawn Mower Instructions (Snapper 6-0941) 6-0941, 4 |