Adam Equipment 3126611270 Manual 

Text of Adam Equipment 3126611270 User Guide:

• Adam Equipment 3126611270, © Adam Equipment Company 2011 Adam Equipment ADAM THERMAL PRINTER (P.N. 3126611270 Revision B, August 2011) This document is hosted by Old Will Knott Scales www.oldwillknottscales.com

• Adam Equipment 3126611270, © Adam Equipment Company 2011 Easy Reference: Serial number of the printer: Model of the product linked to this printer: Software revision number of the product linked to the printer: Serial number of the product linked to the printer: Date of Purchase: Name of the supplier and place:

• Adam Equipment 3126611270, 1 © Adam Equipment Company 2011 CONTENTS 1. TECHNICAL SPECIFICATIONS...........................................................................4 2. PRINTER INSTALLATION AND OPERATION.....................................................6 2.1 Packing List.........................................................................................................6 2.2 Printer connection ...............................................................................................7 3. PAPER ROLL INSTALLATION...............................................

• 2 © Adam Equipment Company 2011 • The Adam Thermal Printer is a general purpose thermal tally roll printer specifically designed to work with the Adam series of balances. • The printer comes preset to work with the default RS-232 interface found on the Adam balances but can easily be changed to work on other equipment as well. • The p

• Adam Equipment 3126611270, 3 © Adam Equipment Company 2011 CAUTION: Avoid extremes of temperature. Do not place in direct sunlight or near air conditioning vents. Avoid unstable power sources. Do not operate near large users of electricity such as welding equipment or large motors. Avoid high humidity that might cause condensation, and keep away from direct contact with water. IMPORTANT Clean the print head regularly to avoid poor print quality, only attempt to clean when the printer is off and the head has had

• Adam Equipment 3126611270, 4 © Adam Equipment Company 2011 1. TECHNICAL SPECIFICATIONS ● Print method：Thermal line printing ● Paper width：57.5 ± 0.5mm ● Effective print width：48mm ● Print speed：50mm/s or 14 lines/s ● Print Head Performances： Print columns：384 dots/line or 8 dots/mm Reliability print：50Km ● Interface: Serial interface: D-SUB 25 socket, optional baud rate 2400bps, 4800bps, 9600bps、19200bps、38400bps，57600, 115200, default is at 4800bps, data structure no parity, 8 digital word size,1 digital stop bit, supports RTS/CTS and XON/XOFF handshake protoc

• Adam Equipment 3126611270, 5 © Adam Equipment Company 2011 ● Characters： ASCII character set：12×24 dot，1.25（W）×3.00（H）mm . ● Print paper： Paper type：Thermal print paper Paper width：57.5±0.5mm, Paper thickness：0.06～0.08mm Roll outer dia. (max.）：Φ65mm Roll inner dia. (min.）：Φ12mm Recommend thermal print paper: ADAM Box of 10 – part number 3126011281 Box of 20 – part number 3126011282 ● Printer power adaptor: Adaptor input voltage：AC 110V/220V，50～60Hz Adaptor output voltage：DC 8.5V/3A ● Printer weight：0.8kg ● Overall dimensions： 114（W）× 184（D）× 90（H）mm ● Working t

• Adam Equipment 3126611270, 6 © Adam Equipment Company 2011 2. PRINTER INSTALLATION AND OPERATION 2.1 Packing List Item Part Number Quantity Adam Thermal Printer 2120011268 1 Power Adaptor Module 3124011269 1 Mains cable Country dependant 1 RS 232 (25 pin to 9 pin) cable - female 3124011279 1 RS 232 (25 pin to 9 pin) cable - male 3124011273 1 Thermal paper 3126011263 1 Manual 3126611270 1

• 7 © Adam Equipment Company 2011 2.2 Printer connection Please connect the cables as shown. Make sure the printer and HOST machine are powered off and connect the data communication cable to the SERIAL PORT The RJ-11 jack is for use when connecting the printer to a cash drawer. Connect the Power adaptor to the printer and electricity supply (c)

• Adam Equipment 3126611270, 8 © Adam Equipment Company 2011 3. PAPER ROLL INSTALLATION The thermal paper is fitted as below （1）Open the top cover （2）Place the paper roll into the space provided in the following way. Correct direction Wrong direction （3） Pull the leading edge of the paper outside of the printer and then close the top cover. （4）Tear off the excess paper using the cutter in the top cover 4. FRONT PANEL DESCRIPTIONS FEED key： To feed the paper through POWER light： ：： ：Power light to i

• Adam Equipment 3126611270, 9 © Adam Equipment Company 2011 5. SERIAL INTERFACE Pin definition of serial interface： Pins Signal Description Signal Source Explanation 2 TXD Printer When you use XON/XOFF handshake protocol, printer sends control code XON/XOFF to the host machine. 3 RXD Host machine The printer receives data from the host machine 4 RTS Printer This signal indicates the printer status, low level indicates printer busy, can not receive data, the high level indicates printer ready, can receive data. 7 GND —— Ground signal 20 DTR Printer Same with RTS signal(pin 4) All Adam Equipment scales and balances use a 3 wire cable conn

• Adam Equipment 3126611270, 10 © Adam Equipment Company 2011 6. ATP BAUD RATE SETTING INSTRUCTIONS Please contact Adam Equipment to obtain the application tool required 1. Connect the ATP to your PC using the cable provided 2. Power ON the ATP 3. Open the ATP baud rate setting application 4. Select the COM port that your PC is using 5. Select the current baud rate that your ATP is set to(default is 9600) 6. Select your required baud rate from the drop down list on the right hand side 7. Click on “Set Default Baud rate” 8.

• 11 © Adam Equipment Company 2011 7. COMMAND FUNCTION LIST No. Commands Name 1 HT Horizontal tab 2 LF Print and line feed 3 CR Print and carriage return 4 ESC SO Select Double Width 5 ESC DC4 Disable Double Width 6 ESC SP n Set character right space amount 7 ESC ! n Batch specify print mode 8

• Adam Equipment 3126611270, 12 © Adam Equipment Company 2011 WARRANTY INFORMATION Adam Equipment offers Limited Warranty (Parts and Labour) for the components failed due to defects in materials or workmanship. Warranty starts from the date of delivery. During the warranty period, should any repairs be necessary, the purchaser must inform its supplier or Adam Equipment Company. The company or its authorised Technician reserves the right to repair or replace the components at any of its workshops depending on the severity of the problems. However, any freight involved in sending the faulty

• Adam Equipment 3126611270, © Adam Equipment Company 2011 Manufacturer’s Declaration of Conformity This product has been manufactured in accordance with the harmonised European standards, following the provisions of the below stated directives: Electro Magnetic Compatibility Directive 2004/108/EC Low Voltage Directive 2006/95/EC Adam Equipment Co. Bond Avenue, Denbigh East Milton Keynes, MK1 1SW United Kingdom FCC COMPLIANCE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against ha

• Adam Equipment 3126611270, © Adam Equipment Company 2011 ADAM EQUIPMENT is an ISO 9001:2008 certified global company with more than 40 years experience in the production and sale of electronic weighing equipment. Adam products are predominantly designed for the Laboratory, Educational, Medical, retail and Industrial Segments. The product range can be described as follows: -Analytical and Precision Balances -Compact and Portable Balances -High Capacity Balances -Moisture analysers / balances -Mechanical Scales -Counting Scales -Digital Weighing/Check-weighin

Related Products and Documents (Printer):

Comparable Devices:

Similar Resources:

• TallyGenicom 7265+ (2 pages) Serial7265+ Serial Matrix PrinterTop Speed Of Up To 900 CPS.At a top speed of 900 characters per second, the 7265+ keeps pace with the hectic business world whereprinting is time sensitive and critical. The 7265+ produces multi-part invoices, shipping documents or barcode labels at a rate of 40,000 pages per month.The 7265+ is expandable to two front input t …

• Toshiba SX4T - TEC B B/W Direct Thermal (316 pages) TEC Thermal Printer B-SX4T/SX5T SERIES Document No. EO0-33013AUM Original Jan., 2003 (Revised Feb., 2003) User's ManualTABLE OF CONTENTS B-SX5T OWNER’S MANUAL ............................... EO1-33036 PRODUCT DESCRIPTION ................................... EO10-33013A MAINTENANCE MANUAL .................................... EO18-33012A B-SX4T …

• Xerox Phaser 3610 (5 pages) www.xerox.com/office/3610supportwww.xerox.com/office/3610supplieswww.xerox.com/msds (U.S./Canada)www.xerox.com/environment_europewww.xerox.com/office/businessresourcecenterwww.xerox.com/office/3610support604E95710 Rev A© 2013 Xerox Corporation. All Rights Reserved. Xerox® and Xerox and Design®, and Phaser®are trademarks of Xerox Corporation in the Un …

• Samsung ML-2955DW/XAA (231 pages) ML-295x Series사용 설명서기본편imagine the possibilities윈도우 환경에서의 제품 설치, 기본 사용법, 기본적인 문제 해결 방법 등을 설명합니다. …

• Lexmark X548 Family (16 pages) Quick ReferenceLearning about the printerUnderstanding the printer control panel2ABC3DEF5JKL6MNO4GHI7PQRS8TUV9WXYZ#01@!.23456198107Item Description1 Display View scanning, copying, faxing, and printingoptions as well as status and error messages.2 Keypad2ABC3DEF5JKL6MNO4GHI7PQRS8TUV9WXYZ#01@!.Enter numbers, letters, or symbols on thedisplay.3 Pause• Press …

• Canon MX490 Series (4 pages) 312XXXXXXXX © CANON INC. 20142121112342212121ESENESENESPAÑOLGuía de inicioSe dispone de tutoriales en vídeoNo conecte aún el cable USB.2 pulgadas (5 cm)ENGLISHGetting StartedVideo Tutorials AvailableDo not connect the USB cable yet.2 inches (5 cm)QT6-0434-V01PRINTED IN XXXXXXXXRMC: K10415 …

Comments, Questions and Opinions: