ACTi ACM-5811 Quick Installation Manual
|
0-1 0 Getting Started 1.1 PACKAGE CONTENTS ACM-5811 Product CD Terminal Blocks for Power & DI/O Warranty Card Accessory 1
ACTi ACM-5811, 0-1 1.2 PHYSICAL DESCRIPTION 1. DC Iris DC Iris Lens Control Port 2. Analog Video Output The IP CCD D/N PoE Box Camera supports one channel analog video output. 3. Ethernet Port The IP CCD D/N PoE Box Camera connects to the Ethernet via a standard RJ45 connector. This camera can automatically detect the best network speed when connected to other auto-negotiation(NWAY) supported devices. (10Base-T/100Base-TX Ethernet). 4. Reset Button Step 1: Switch off IP device by disconnecting the power cable
0-2 Step 2: Press and continue to hold the Reset Button with a pointed object. Reconnect the power cable while still holding the reset button. Step 3: Keep the reset button depressed for at least 6 seconds before releasing it. The unit will then start up with factory default settings. 5. The I/O Terminal Connector Used in applications like motion de
ACTi ACM-5811, 0-3 transient voltages. The I/O terminal pins are numbered left to right, as shown below. Connect input/output devices to the camera as follows: 1. Attach the cables for the device securely to the supplied green connector block. 2. Once the cables are connected, push the connector block into the terminal connector (also green) on the camera. 1 2 3 FUSE 1A NPN DC TO DC DI DO 3.3V DC POWER GND 1 2 3 4 CONVERTER EARTH GND DO DI RELAY SW DIODE DEVICE - + POWER INPUT CAMERA 6. Power Input Connect the pow
ACTi ACM-5811, 0-1 1.3 BASIC CONNECTIONS Follow the procedures below to connect the IP device to the respective apparatuses. 1. Connect an analog monitor to IP device video out (BNC Connector) 2. Connect the power adaptor to IP device 3. Connect IP CCD D/N PoE Box Camera’s ethernet port to an Ethernet (RJ45 connectors). If your IP CCD D/N PoE Box Camera supports Power Over Ethernet (PoE), you may connect it directly to a PoE supported switch, a PoE injector connected to a switch or other Power Source Equipments(PSE) 4. Connect a PC to the Ethernet hub (RJ45 connec
ACTi ACM-5811, 1-2 1 Quick Tour This section guides you with a quick tour on this IP device. 2.1 Configure this IP Device 2.1.1 Make sure network environment Default IP of this IP device is 192.168.0.100. Please make sure this IP device and your PC are on the same network segment before running the installation. 2 Please set the settings as below. IP address: 192.168. 0.xxx Subnet mask: 255.255.255. 0 (NOTE: xxx should be a number from 1 to 254 except 100, which is used by the IP device. Please also make sure that no two equipments use the same IP address in the same network
ACTi ACM-5811, 1-3 2.1.2 Open Internal Explorer with IP address 2.1.3 Login with default administrator’s account & password NOTE: Default administrator account is set to Admin, password is set to 123456, and click button. NOTE: Internet Explorer 6.0 or above is highly recommended. You may download it from http://www.microsoft.com/windows/ie/downloads/default.mspx The default IP address for this device is 192.168.0.100
ACTi ACM-5811, 1-5 *IP Address : The default IP address is 192.168.0.100. *Subnet Mask : The default subnet mask is 255.255.255.0 *Click button NOTE: In your Client PC, please make sure the setting of Network Connections Type is set to Auto Negotation to enable best network speed performance. Otherwise, you may be unable to see live video or suffer delays and skipped frames. IMPORTANT: Please record the new IP address immediately after you change it. If you forget the new IP address, you ma
ACTi ACM-5811, 1-6 NOTE: Please make sure the TV Input (NTSC / PAL) meets your requirement, and click button. 2.1.7 Click Save Reboot to save all settings and please wait about 30 seconds for system reboot.
DOWNLOAD |
ACTi B21 IP Camera Hardware manual
B21 |
ACTi CAM-5100 IP Camera Product specification
CAM-5100 |
ACTi CAM-5100M IP Camera Operation & user’s manual
CAM-5100M |
ACTi KCM-3211 IP Camera Specifications
KCM-3211 |
ACTi TCM-3111 IP Camera Operation & user’s manual
TCM-3111 |
ACTi TCM-5311 IP Camera Hardware user manual
TCM-5311 |
ACTi TCM-7811 IP Camera Hardware user manual
TCM-7811 |
ACTi TCM-1111 IP Camera Hardware user manual
TCM-1111 |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Panasonic | H-FS014042 | Operating instructions manual | panasonic/h-fs014042-8DE.pdf | 19 Jul 2023 | 16 | |
2 | Rancilio | 8S | Specification | rancilio/8s-ZX4.pdf | 21 Aug 2023 | 2 | 0.17 Mb |
3 | Hitachi | G 18SR | Technical data and service manual | hitachi-power-tools/g-18sr-5DM.pdf | 13 Jul 2022 | 34 | |
4 | Lightolier | Lytespan 8316 | Specification | lightolier/lytespan-8316-B81.pdf | 10 Oct 2022 | 1 | |
5 | Pioneer | PRO-110FD | Operating instructions manual | pioneer/pro-110fd-GNZ.pdf | 18 Sep 2023 | 126 | |
6 | Amana | MVH250L | Owner's manual | amana/mvh250l-C14.pdf | 08 May 2023 | 46 | 1.76 Mb |
D-Link
Check Your Package ContentsThese are the items included with your purchase:If any of the below items are missing, please contact your reseller.Before You BeginYou must have at least the following:• Windows 98/Me/2000/XP• A CD-ROM drive• An available Ethernet connectionDCS-5300GThis product can be set upusing Internet Explorer 6.xor aboveWireless Intern …
DCS-5300G - Network Camera(12 pages) |
EverFocus
EZA1840 eZ.HD Series 8MP IP66 IR Bullet Camera User’s Manual Copyright © EverFocus Electronics Corp. Release Date: September, 2019 All the images including product pictures or screen shots in this document are for example only. The images may vary depending on the product and software version. I …
eZ.HD Series(7 pages) |
Foscam
V3.01 Model: FI8601W Quick Installation Guide Outdoor Water-proof Wireless IP Camera ShenZhen Foscam Intelligent Technology Co., Ltd
…
FI8601W(16 pages) |
D-Link
Wi-Fi Baby CameraDCS-825LQuick Installation GuideКраткое руководство по установкеGuía de Instalación RápidaGuia de Instalação Rápida快速安裝指南Petunjuk Pemasangan Cepatクイックインストールガイド
…
DCS-825L(52 pages) |
Kompernass
GBIEQuick installation guideIP surveillance camera IUK 5 A1 (IAN 48807)This guide shows you how to get your surveillance camera up and running in just a few steps using your smartphone or tablet. It also shows you how to connect to your Wi-Fi network.LANWANStep 1 Step 2 Step 3 Step 4 ■ Screw the Wi-Fi antenna onto the camera. ■ Connect the mains adapter …
IUK 5 A1(181 pages) |
GO4
GO4 Vega I1 Eye One IP Camera User manualUser manual 2014-01 V1.1 Dear users, the configuration for this camera is professional, so please read the user manual carefully before using the camera.
…
Vega I1 Eye One(19 pages) |
KIDDY Other CRUISER PRO -Other Manual (KIDDY CRUISER PRO -) CRUISER PRO -, 86 |
Monacor Amplifier PA-312PA-312 Instruction manual - FVI2FL PA-312, 20 |
Weslo Home Gym MOMENTUM 730 ELLIPTICAL EXERCISER 831.28540.0Home Gym Operation & user’s manual (Weslo MOMENTUM 730 ELLIPTICAL EXERCISER 831.28540.0) MOMENTUM 730 ELLIPTICAL EXERCISER 831.28540.0, 16 |
Escea Grill EW5000Grill #545YGR EW5000, 7 |
Arctiko Freezer LTFE 310User Guide: Arctiko LTFE 310 (A4WO5S, Upd.08th Jan 2024) LTFE 310, 12 |
Dell Monitor E1910 - 19" LCD MonitorE1910 - 19" LCD Monitor Quick setup manual - D2P1BN E1910 - 19" LCD Monitor, 2 |
Natec Keyboard Genesis RX88Natec Keyboard Operation & user’s manual (File: natec-genesis-rx88-operation-user-s-manual-15, 27/11/2023) Genesis RX88, 15 |
Honeywell Air Cleaner UV2400UUser Guide: Honeywell UV2400U (11ENPK, Upd.17th Aug 2023) UV2400U, 72 |
AudioBahn Processor ALD80QAudioBahn ALD80Q User Guide (Doc Type: Processor Operating instructions manual) ALD80Q, 27 |
TomTom Car Navigation system RiderTomTom Car Navigation system Reference manual (File: tomtom-rider-reference-manual-97, 29.10.2023) Rider, 97 |
Andis Electric Shaver RCTElectric Shaver PDF Operating instructions RCT, 2 |
BenQ Projector MS502BenQ Projector MS502 Operation & user’s manual MS502, 55 |