Manualios.com

Panasonic WJ-NX400K Important Information Manual

Panasonic WJ-NX400K Manual Online:

3.4, 550 votes
Panasonic WJ-NX400K User Manual
Panasonic WJ-NX400K User Guide
Panasonic WJ-NX400K Online Manual

Text of Panasonic WJ-NX400K User Guide:

  • Panasonic WJ-NX400K, 12 Refer installation work to the dealer. Installation work requires technique and experiences. Failure to observe this may cause fire, electric shock, injury, or dam- age to the product. • Be sure to consult the dealer. Do not disassemble nor alter this product. Failure to observe this may cause fire or electric shock. • Ask your dealer for inspection and repair. Do not insert any foreign objects. Do not allow any foreign object or liquid such as water, a metallic part, etc. to enter since it may

  • Panasonic WJ-NX400K, 7 About the user manuals There are 4 sets of operating instructions for the WJ-NX400K, WJ-NX400K/G as follows. Installation Guide (Printed): Contains procedures of how to install/connect this product with devices and descrip- tions about "Easy start". Important Information (this document): Contains preface, precautions, and major operating controls and their functions and specifications. Operating Instructions (PDF): Contains descriptions of how to configure the required settings and how to operate this product. Both operations/configurations using the interface on the product and using a PC via a network are provided. Quick Reference Guide: Contains de

  • Panasonic WJ-NX400K, 26 Symptom Cause/solution Ref. pages The "Communication error: Cam.cc" indication is displayed on the main monitor. • Confirm that the camera is connected correctly and firmly. Check the camera connection. Installation Guide • If the connection is appropriate, the cable may be broken or the camera may be out of order. Consult the dealer. − The "Thermal error" indication is displayed on the main monitor. • Check if the fan is malfunctioning. Operating Instructions • Check if the recorder ventilation holes or cooling fan are blocked, and also check for dust collected around the ventilation holes. Installation Guide �

  • Panasonic WJ-NX400K, 8 Trademarks and registered trademarks • Adobe, Acrobat Reader and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. • Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX, and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. • Intel and Intel Core are trademarks or registered trademarks of Intel Corporation in the United States and other countries. • HDMI, the HDMI logo and High-Definition Multimedia Interface a

  • Panasonic WJ-NX400K, 2 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulat- ed "dangerous voltage" within the prod- uct's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: Before attempting to connect or operate this product, please read the label on the bottom. The e

  • Panasonic WJ-NX400K, 24 When removing the HDD unit, it is necessary to perform the removal process in advance. When replacing the HDD unit, it is necessary to perform the removal process/the link process. Important: • Consult the dealer for the removal process/removal and the link process/installation of the HDD unit. • Once the installation process is completed, the data in the HDD unit is deleted. After the removing process is completed, the HDD unit can be removed even if the recorder is operating. The following explains procedures for how to remove the HDD unit after the removing process. Step

  • 3 FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5 amp and that it is approved by ASTA or BSI to BS1362. Check for the ASTA

  • Panasonic WJ-NX400K, 28 • General Power source: WJ-NX400K: 120 V AC, 60 Hz WJ-NX400K/G: 220 V to 240 V AC, 50 Hz/60 Hz Power consumption: WJ-NX400K: 125 W (230 VA) WJ-NX400K/G: 125 W (245 VA) Ambient operating temperature: Main body: +5 °C - +45 °C {41 °F - 113 °F} Mouse (accessory): +5 °C - +40 °C {41 °F - 104 °F} Ambient operating humidity: 5 % to 90 % (non condensing) Maximum operating altitude: 2000 m {6562 feet} above sea level Recording compression method: H.265, H.264, JPEG Dimensions: 430 mm (W) × 132 mm (H) × 413 mm (D) (From Rack Mount

  • Panasonic WJ-NX400K, 9 Copyright Except for open source software licensed under GPL/LGPL and so on, distributing, copying, disassembling, reverse compiling and reverse engineering of the software provided with this product are all expressly prohibited. In addition, exporting any soft- ware provided with this product violating export laws is prohibited. GPL/LGPL • This product contains software licensed under GPL (GNU General Public License), LGPL (GNU Lesser General Public License), etc. • Customers can duplicate, distribute and modif

  • 20 It is necessary to register users who operate the recorder and hosts (PC) that accesses the recorder via a network such as a LAN. Up to 32 users can be registered. It is possible to register the following for the user information. Item Description User name User name is to be registered to log in to the recorder. The user name will be entered at the time of login. Password

  • 11 Registering a license of a secure communication kit (option) to the recorder enables secure communication with cameras. Each secure communication kit differs in the number of cameras that can be registered as shown in the table below. Use several licenses as necessary. WJ-NXS01, WJ-NXS01W WJ-NXS04, WJ-NXS04W WJ-NXS16, WJ-NXS16W WJ-NXS32, WJ-NXS32W 1 camera 4 cameras

  • Panasonic WJ-NX400K, 22 How to attach the HDD unit holding bracket Angle ① Insert the HDD unit holding bracket into the angle hole. ② Fix the HDD unit holding bracket with a screw while sliding it to the left. HDD unit holding bracket ② ① When you transport the recorder ( 1 ) Remove all the HDD units in the recorder or fit the HDD unit holding brackets and fix them with screws. ( 2 ) Put the recorder between the cushions and insert together into the packing box. Important: ㍟ The recorder weighs over 10 kg {22.1 lbs} . Be careful not to drop the recorder when installing it into a rack. Dropping may cause damage, deformation of the recorder,

  • Panasonic WJ-NX400K, 15 Front view ① Error indicator [ERROR] Blinks when an error that can become a problem for the recorder to run the system occurs. Blinks red: System error (Network link error, HDD error, Recording error, etc.) Blinks orange: Thermal error, cooling fan malfunction, etc. Shows a solid light when automatically reset from an error status. ② Alarm indicator [ALARM] Blinks when an alarm occurs, and lights when the alarm output stops. This indicator will go off when the [Reset] button (☞ Operating Instructions (PDF)) is c

  • Panasonic WJ-NX400K, 16 ⑩ Recording indicator [REC] Lights orange when recording is being performed. ⑪ LCD menu switching button [LCD SW] Use this button to switch menus on LCD, i.e. from/to the date/time display (default) to/from the IP address display of the recorder. If an error message is displayed on the LCD, the message will be deleted if this button is pushed and it will return to the date/time display. ⑫ Front cover Open the front cover when adding/replacing the HDD unit. Keep this cover closed and locked

  • Panasonic WJ-NX400K, 29 Network port (Camera/PC): 10BASE-T/100BASE-TX/1000BASE-T (RJ-45) ×1 Network port (PC): 10BASE-T/100BASE-TX/1000BASE-T (RJ-45) ×1 Maintenance port: 10BASE-T/100BASE-TX (RJ-45) ×1 Support protocols: HTTP, RTP, RTSP, TCP/IP, UDP/IP, FTP (Server), SMTP, NTP (Server, Client), DNS, SNMP, POP3 *1 Non-voltage make contact input +3.3 V pull-up Approx. 23 kΩ *2 Open collector output 24 V DC max., –200 mA max. *3 +5 V ±0.5 V 200 mA max. *4 High (ON) DC 5 V/Low (OFF) DC 0 V • Option (as of December 2017) Additional Camera Kit (license for 32 cameras) WJ-NXE40, WJ-NXE40W Secure Communication Kit (license for 1 camera) WJ-NXS01, WJ-NXS01W Secure Communication Kit (licens

  • 4 Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation holes. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators,

  • 19 ⑬ External storage connector [EXT STORAGE (5 V 50 mA)] Connect the optional extension unit (WJ-HXE400) to this connector using the dedicated connection cable provided with the extension unit. Make sure to connect the extension units in order from external storage connector number 1. ⑭ Cable clamps fixing holes Fit the cable clamp (provided with the extension

  • Panasonic WJ-NX400K, 18 Rear view ① Alarm/Control connector [ALARM/CONTROL] This connector is used when connecting with an external device such as a sensor or anti-theft door switch that out - put alarm signals, or when connecting an alarm device such as a buzzer or a lamp to the external equipment. The two provided terminal plug (12 pin) can be mounted. ② Alarm In connector [ALARM IN] It is used when connecting with an external device such as a sensor or anti-theft door switch that output alarm signals. The two provided terminal block plugs (16) can

  • 27 Inspect the power cord, power plug and connectors periodically. Symptom Cause/solution Ref. pages The power cord insulation is damaged. • The power cord, connector, or power plug is damaged. This may result in electric shock or a fire. Unplug the power plug from the AC outlet immediately, and refer to qualified service personnel. − The power cord, plug and connectors get hot during

  • Panasonic WJ-NX400K, 25 Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Symptom Cause/solution Ref. pages Power is not turned on. • Is the power plug connected to the outlet firmly? Confirm the cable is firmly connected. − • Check if the power cord is properly inserted into the power socket of the recorder. Check if it is connected firmly. 19 Camera images are not displayed on the monitor. • Is the lens cap of the camera detached from the camera? C

  • Panasonic WJ-NX400K, 17 Inside the front cover ① HDD units [Option] Only the hard disk drive encased in the dedicated hard disk drive canister (HDD units) can be installed in the recorder. Contact your dealer about purchasing, installing, and replacing the hard disk drives. ② HDD status indicator [STS] Indicates the operational status of the respective hard disk drive. Lights green: Indicates that the power of the (formatted) hard disk is on. Blinks green: Indicates that the respective hard disk drive is for playback use only. (Recording is unavailable using the respective hard disk drive.) Blinks orange: Indicates that the respec

  • Panasonic WJ-NX400K, 14 Indication label Refer to the indication label placed on the surface of this product for the equipment classification and power source, etc. AVC Patent Portfolio License THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO") AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVID

  • Panasonic WJ-NX400K, 5 Contents Safety Information ................................................................................................................... 2 Important safety instructions ....................................................................................................................................................4 Introduction .............................................................................................................................. 6 Preface ...................................................................................

  • Panasonic WJ-NX400K, For U.S. and Canada: Panasonic System Communications Company of North America, Unit of Panasonic Corporation of North America www.panasonic.com/business/ For customer support, call 1.800.528.6747 Two Riverfront Plaza, Newark, NJ 07102-5490 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 www.panasonic.ca © Panasonic Corporation 2017 L1116-4127 PGQP2334VA For Europe and other countries: Panasonic Corporation http://www.panasonic.com Panasonic Corporation Osaka, Japan Authorised Representative in EU: Pa

  • Panasonic WJ-NX400K, Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual. Important Information Network Disk Recorder Model No. WJ-NX400K WJ-NX400K/G Network Disk Recorder WJ-NX400 1 2 3 4 5 6 7 8 9

  • Panasonic WJ-NX400K, 23 The illustration on this page is schematic. Details of the shape are omitted. It is possible to install the HDD unit without stopping the operation (except when RAID1/RAID5 or RAID6 mode is in operation). When the recorder has the "HDD unit holding bracket" attached at the factory before shipment, remove it before STEP 2. Step 1 After inserting the provided key into the key hole on the front cover, push and turn it to the right to open the front cover. ➀ ➁ Step 2 Insert the HDD units into the HDD slots in order start- ing from HDD1. ① Lift up the lever on the HDD unit while holding down the removal knob, and then insert the HDD unit

  • Panasonic WJ-NX400K, 21 To install a hard disk drive in the recorder, it is necessary to assemble an HDD unit (encase the hard disk drive in the HDD canister). The HDD unit is designed to easily install/remove the hard disk drive in/from the recorder. Contact your dealer about purchasing, installing, and replacing the hard disk drives. Important: • The HDD unit is a precision device. Handle them with care. Vibration and shocks may cause failure of the HDD unit. • Before transportation, read "HDD unit holding bracket" (this page) and "When you transport the recorder" (☞ Page 22). • Do not move or install this product just after turning the pow

  • Panasonic WJ-NX400K, 10 About HDD Unit To install a hard disk drive in the recorder, it is necessary to assemble an HDD unit (encase the hard disk drive in the HDD canis- ter).The HDD unit is designed to easily install/remove the hard disk drive in/from the recorder. Contact your dealer about purchasing, installing, and replacing the hard disk drives. About Additional Camera Kit (option) Number of cameras to be used in the system (64 cameras in basic system) can be increased to 96 and 128 (maximum) by pur- chasing the Additional Camera Kit (WJ-NXE40, WJ-NXE40W: option). Refer to following table regarding camera numbers. Additional Camera Kit WJ-NX

Related Products and Documents (Tuner):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Sony DVP-S735D Operating instructions manual sony/dvp-s735d-X64.pdf 05 Sep 2022 84 1.34 Mb
2 AEG Electrolux EKE 5101 Instruction book aeg-electrolux/eke-5101-75O.pdf 03 Jan 2023 24 1.09 Mb
3 Proctor-Silex 44141-MX Use & care manual hamilton-beach/44141-mx-K7Q.pdf 27 Nov 2023 19 0.28 Mb
4 Moulinex Masterchef 3000 Manual  moulinex/masterchef-3000-2HV.pdf 15 Mar 2024 76
5 AEG 64500G-M Instruction booklet aeg/64500g-m-S1C.pdf 05 Feb 2024 28 0.39 Mb
6 Auto Page RS655 Comparison chart auto-page/rs655-ZG2.pdf 23 Mar 2024 2 0.67 Mb

Similar Resources:

  • Panasonic

    WJ-ND400K

    (4 pages)
    LCD[ESC] button[SET] buttonArrow buttonsQuick Reference GuideThe Quick Reference Guide provides simple explanations of how to operate this recorder.■ Network settingsConfigure the network settings such as the IP address, subnet mask, etc. for each port.ItemCamera port[PT#1]Client PC port [PT#2]Maintenance port [PT#3]DHCP_OFF_IP address 192.168.0.250 192.16 …
  • SOUNDMASTER

    UR2040

    (10 pages)
    Sleep function up to 90 minutes. UR2040 / English Manual 1 …
  • ELECRAFT

    KXAT2

    (6 pages)
    Elecraft • www.elecraft.com • 831-763-4211 Elecraft KXAT2 Automatic Antenna Tuner Installation Instructions Revision B, June 26, 2017 E740294 Copyright © 2017, Elecraft, Inc. All Rights Reserved Introduction The KXAT2 internal automatic antenna tuner converts a wide range of impedances presented by antennas to a value close to 50 ohm …
  • DYNACO

    FM-5

    (21 pages)
    rummSMWl.ffiffiffiATffihq*iffi-WKffiWUrud .$rffi ffi ffi&ffi ff?ffi$.ffi ttll'luaudrnba sgqtr SuluratuorsuorleJtuntuuro) IIE ut pauoll-uatu aq lsnw raqtunu sil.llUl$Wfiru -EViSlS …
  • Pioneer

    XV-DV55

    (120 pages)
    XV-DV55DVD TUNERCOMBINÉ RADIO / DVDS-DV55SW-KS-DV55SW-QPOWERED SUBWOOFERENCEINTE ACTIVE D’EXTRÊMES GRAVESS-DV55ST-KS-DV55ST-QSATELLITE SPEAKERENCEINTES SATELLITEOperating InstructionsMode d’emploi …
  • QRPGuys

    Multi Z

    (13 pages)
    Page 1 of 13 multi_assy_053019.pdf QRPGuys Multi Z Tuner Assembly Manual First, familiarize yourself with the parts and check for all the components. If a part is missing, please contact us and we will send one. You must use [email protected] to request a part. Parts List 1 – QRPGuys Multi-Tuner PCB, 5 pieces 2 – S2, S3 …

Comments, Questions and Opinions: