Mosaic PALETTE PLUS Quick Start Manual
|
Mosaic PALETTE PLUS, Hello, friend! There’s a learning curve to printing with Palette+. Please pay attention to the setup instructions. They include tips and best practices to get you printing with Palette+ as quickly as possible and can save you headaches later. Welcome! 2
Mosaic PALETTE PLUS, NEVER plug Palette+ into a computer (USB) while Palette+ is powered on. The only time you need to connect Palette+ with your computer is to update firmware. Don’t touch Palette+’s hot tool when it’s hot. It hurts! Palette+ is only compatible with 1.75mm filament. Do not perform any maintenance on Palette+’s internal systems while Palette+ is powered on (or risk electrical shock or injury, and potentially damage to Palette+). In the rare instance that you hear Palette+’s drives skipping (or any other unusual clicking noises), do not force filament into Palette+. Cancel the print, unload filament, and unplug
Contents Palette+ Scroll Wheel Power supply Power supply cord Filament bar Additional splicing tubes (x2) Small guide tube for Bowden printers Screwdriver Velcro squares (x6) USB cable Spool Pal clips Preloaded SD card Guide tube clip Clear PLA filament
Load PLA Filament Following instructions on Palette+, and load filament into drives. Palette+ will heat up and begin to create splices. Select Demo-2c for 2 colors, 1 2 3 Demo-3c for 3 colors, or Demo-4c for 4 colors. 8
Mosaic PALETTE PLUS, What’s Next? Now that you’ve created a layered print, you’re ready to create your own precise multi-color prints! DOWNLOAD CHROMA Please visit http://mm3d.co/chroma to download Chroma. Once installed you will find further setup instructions! 10
Mosaic PALETTE PLUS, Best Practices • Maintenance: Clean your Palette+’s drive gears as needed (about as often as you clean your printer’s drive gears) • Ensure filament spools can unspool without too much force • For optimal performance, use filament from the same manufacturer – they tend to splice and stick together best! • Ensure printer and slicer settings are well-tuned for single- material prints before attempting Palette+ prints 11 Resources & Help MULTI-MATERIAL: http://mm3d.co/multimaterial Splicing and print setting guidance for multi-material prints RESOURCES: http://mm3d.co/resources Alternative guide tube clips Multi-body modeling & slicing videos SUPPORT: http://
Mosaic PALETTE PLUS, Connect & Contact CONNECT: http://mosaicmanufacturing.com We’d love to see what you make! Share your creations with us: @MosaicMfg FORUM: http://mm3d.co/forum Community Forum FEEDBACK: http://mm3d.co/feedback We’re always seeking to improve the entire Palette+ experience. CONTACT: http://mm3d.co/contact Anything and everything else! Questions or feedback? Send us a message! [email protected] Happy Printing!
CraftUnique CraftBot Plus 3D Printers Service manual
CraftBot Plus |
Kora Pro 3D PC 3D Printers Troubleshooting manual
Pro 3D PC |
Gembird 3DP-PEND-01 3D Printers Quick installation manual
3DP-PEND-01 |
mbot 3d CUBE 3D Printers Operation & user’s manual
CUBE |
Tripodmaker Tripodmaker 3D Printers Operation & user’s manual
Tripodmaker |
LulzBot TAZ 5 3D Printers Operation & user’s manual
TAZ 5 |
FSL3D Phoenix Touch 3D Printers Manual
Phoenix Touch |
Cocoon HE161192 3D Printers Instruction manual
HE161192 |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | QUAD | FM2 | Instruction booklet | quad/fm2-E72.pdf | 08 Oct 2022 | 24 | 2.01 Mb |
2 | Fantasy Spas | ILLUSION | Owner's manual | fantasy-spas/illusion-6PF.pdf | 03 Sep 2023 | 21 | |
3 | Aiwa | CSD-A110 | Operating instructions manual | aiwa/csd-a110-GCQ.pdf | 15 Mar 2024 | 8 | 0.94 Mb |
4 | NEC | ShieldPRO FC-N21S | Operation & user’s manual | nec/shieldpro-fc-n21s-Y1R.pdf | 22 Jun 2023 | 198 | |
5 | Kambrook | Jaguar KBV40 | Owner's manual | kambrook/jaguar-kbv40-661.pdf | 08 Mar 2024 | 4 | |
6 | LG | LDA-511 - Progressive Scan DVD Video | Owner's manual | lg/lda-511-progressive-scan-dvd-video-F25.pdf | 22 Sep 2022 | 34 |
mbot 3d
MagicFirm Technical Support : [email protected] DESKTOPDESKTOPDESKTOPDESKTOP 3D3D3D3D PRINTERPRINTERPRINTERPRINTERUSERUSERUSERUSER MANUALMANUALMANUALMANUAL2012-12-05
…
CUBE(33 pages) |
Tristarbot
find more information on www.tristarbot.com 1 M1 User Manual WARNINGS /Safety Information ................................................................................................ 2 Your first print .......................................................................................................................... 3 Print via Graphic LCD con …
M1(15 pages) |
FLASHFORGE 3D PRINTER
FindFder User GuidFlashfFlashforgede | www.flashforgeUe Corporathforge.com e FindUser Gion der 3DGuide D Prie 0086-inter - 0579-822739989
…
finder(84 pages) |
BCN3D
Install printing surfaceWatch our video to see how to correctly position the build plate.Set up videoWe would like to thank all users for trusting BCN3D, for helping us to reach our dreams and to create a better product every day.1. Unboxing1. Remove the components from the foam and place them on a table. Then remove the foam and the cardboard. 2. Rem …
Sigma Series(2 pages) |
G3D
3Acme Thread4Vat5Vat Lock Screw1Build Plate Lock Screw2Build Plate6Calibration Lever10WiFi Reset9Ethernet Port8USB Port7Servo Panel11Power Button13Main Switch14Fuse Holder15Power Cable12Lifting HandleT-1000 QUICK START GUIDEThis quick start guide explains basic instructions on how to unbox and set up the T-1000 UV 3D printer. For more information, please re …
T-1000(4 pages) |
Print-Rite
Compact 3D PrinterAccessory Checklist Specification12Find“setupCoLiDo-RepetierHost.exe”in the Flash Drive, double click to start inistallation.4NOTE: Make sure that the filament is inserted intothe tube properly to avoid the filament jam duringoperation. Do not push back excess filament into the cartridge.56Insert the filament into the tube until it come …
CoLiDo(1 pages) |
JLG Boom Lifts 80SL#5TNKCO 80SL: JLG Boom Lifts Owner Documentation 80SL, 162 |
Gitzo Camcorder Accessories GT3540LS#WE8Q69: GT3540LS Camcorder Accessories Parts list GT3540LS, 1 |
Otto Bock Medical Equipment 3R41Medical Equipment PDF Manual 3R41, 152 |
Philips Home Cinema speakers HTS3100/51#WEN3RZ HTS3100/51: Philips Home Cinema speakers Owner Documentation HTS3100/51, 2 |
Sigma Heater 30-H30-H Installation and operation manual - KFUUI8 30-H, 8 |
Interlogix DVR TruVision DVR 41Interlogix TruVision DVR 41 DVR Quick start manual TruVision DVR 41, 60 |
Makita Planer DKP140Makita DKP140 User Manual (Doc Type: Planer Instruction manual) DKP140, 64 |
Bosch Speakers LBC 3951/11Bosch LBC 3951/11 Speakers Manual LBC 3951/11, 4 |
Makita Drill DA3010DA3010 (Drill ePDF User Manual, #1JR37E) DA3010, 8 |
Fast Control Unit XIMPDF User Manual (@IALQ42), Fast XIM Control Unit (Thursday 24-08-2023) XIM, 8 |
SMART Scales HAX SeriesPDF Manual (@3WS97R), SMART HAX Series Scales (Sat 12.2023) HAX Series, 8 |
Honeywell Transmitter 700Honeywell Product Manual: 700 PDF Operation & user’s manual - 5JUGP3 700, 134 |