Samsung DCS Programming Manual

Text of Samsung DCS User Guide:

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 502 (Page 2 of 2) 4. Enter new timer value (must be same number of digits as current value, e.g. 0200) System returns to step 2 [205] DTMF DUR. 0100 MS →0200 5. Press Transfer/TRSF to store and exit OR Press SPEAKER to store and advance to next MMC Default Data: NO ANS FWD 015 sec DTMF DURATION 100 msec FIRST DGT DELAY 600 msec OFFHK SEL 015 sec EFWD DELAY 010 sec Related Items: MMC 102 Call Forward MMC 207 Assign VM/AA Port MMC 306 Hot Line MMC 726 VM/AA Options

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 304 (Page 1 of 1) MMC: 304 ASSIGN STATION /TRUNK USE FOR: ALL SYSTEMS Purpose: You can select which stations are allowed to make calls through C.O. lines or to answer calls for C.O. lines. When Dial=Yes is set, the stations in the selected station use group can make calls on trunks in the selected trunk use group. Similarly, when Ans=Yes is selected, stations can answer calls on those trunks. Use groups are set up in MMC 614 . Note: MMC 406, Trunk Ring Assignment , overrides this MMC for the Answer option.

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 851 (Page 3 of 5) ALM CODE ALARM DEFINITION MJB06 IPC MSGQ Over IPC TX queue full error has occurred in the MCP. Alarm data = IPC Queue type (MCP-LAN, MCP-SCP, MCP-LCP1, MCP-LCP2) MJB06 IPC MSGQ Under IPC TX queue under error has occurred in the MCP. Alarm data = IPC Queue type (MCP-LAN, MCP-SCP, MCP-LCP1, MCP-LCP2) MJB07 Task MSGQ Over Task MSG queue full error has occurred in the MCP. Alarm data = Error Task Kind (CNFG, ERRH, NPER, MSGH, DIGH, SMART, CALL, PPER, SMDR, TMMC, IDLE) MJB07 Task MSGQ Un- der Task MSG queue under error has occurred i

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 713 (Page 1 of 1) MMC: 713 LCR MODIFY DIGIT TABLE FOR: ALL SYSTEMS Purpose: Also referred to as Outdial Rules, this enables the system to add or delete a digit string or single digit, if needed, to complete a call (e.g. adding a digit “1”). The char- acters 4 and # can also be entered. Option Max No. of Digit Entries Number of digits to delete 15 Insert (before dialling string) 14 Append (after dialling string) 14 Digit String Key Insert String + Digit String (delete) + Append String ACTION DISPLAY 1. Open program

• SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 211 (Page 2 of 2) Q For iDCS & OS500 systems ACTION DISPLAY 1. Open programming and select 211 Display shows first door phone [2 01] DOOR RING 1:500 2:500 (If there is no door phone interface module, you see “DOOR NOT EXIST”) 2. Dial door

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 318 (Page 1 of 2) MMC: 318 DISTINCTIVE RING FOR: DCS CI CII 816 408 408i iDCS100 iDCS500 OS500 Purpose: Sets a distinctive ring for stations when calling other stations or for trunks call- ing stations. You can set the tone (T) for keysets to one of eight ring values (1-8), or the cadence (C) of SLTs to one of five ring values (1–5). The default for both is to follow the station ring (F-STN). TONE DESCRIPTION F-S

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 806 (Page 2 of 2)  816 PROCEDURE ACTION DISPLAY 1. Open programming and select 806 Display shows EXP. SLOT NONE →NONE 2. Press RIGHT soft key to change previous card type EXP. SLOT NONE →8TRK 3. Press Transfer/TRSF to store and exit OR Press SPEAKER to store and advance to next MMC  iDCS500 & OS500 PROCEDURE The MMC also displays the power supply unit f

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 807 (Page 1 of 1) MMC: 807 VOLUME CONTROL FOR: ALL SYSTEMS Purpose: Sets the volume levels for the following keyset features: KEY TONE NOISE THRES SIDETONE ALC THRES HANDSET TX TX/RX THRES MIC TX LEVEL TX/RX COMP NOISE GUARD MIN RX VOL* (* iDCS 28D keysets only) Caution: You should change these values only under the supervision of Technical Support.

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 510 (Page 1 of 1) MMC: 510 SLI RING CADENCE FOR: ALL SYSTEMS Purpose: Sets the ring cadence for SLI ports. Options are: 1 Station ring: Ring for internal calls 2 Trunk ring: Ring for trunk calls 3 Door ring Ring for doorphone calls 4 Alarm ring Ring for alarm reminder calls 5 Callback ring Ring for callbacks Cadence values are displayed in the sequence: on / off

• SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 820 (Page 1 of 1) MMC: 820 ASSIGN SYSTEM LINK ID FOR: iDCS100 iDCS500 OS500 Purpose : Assigns the system link ID for Q-SIG networking. For Q-SIG networking it is mandatory to insert a value in SELF. This is sent by the system on setting up calls and is used by the system

• SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 709 (Page 2 of 2) 5. Press RIGHT soft key to return to step 3 and enter another index number OR Press Transfer/TRSF to store and exit OR Press SPEAKER to store and advance to next MMC Default Data: None Related Items: MMC 304 Assign Station/Trunk Use MMC 305 Assign F

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 851 (Page 1 of 5) MMC: 851 ALARM REPORT FOR: iDCS100 iDCS500 OS500 (iDCS systems must have a LAN interface installed.) Purpose : Views, stores, prints or clears system alarms. Two levels of faults are dis- played: major alarms and minor alarms. Major alarms are usually service-affecting and require a certified technician to determine the fault. A minor alarm indicates a fault that may or may not be service-affecting and usually does not seriously degrade the system’s operating capabilities. The alarm buffer will h

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 210 (Page 1 of 5) MMC: 210 CUSTOMER ON/OFF FOR: ALL SYSTEMS Purpose: Sets system features on or off. Not all features are available on all systems (refer to the table over the page: “ “ means a feature is available on that system). ACTION DISPLAY 1. Open programming and select 210 Display shows TEN. ON AND OFF DISA PSWD :ON 2. Dial option number (e.g. 01) OR Press VOLUME keys to select option and press RIGHT soft key to move

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 204 (Page 1 of 1) MMC: 204 COMMON BELL CONTROL FOR: ALL SYSTEMS Purpose: Determines whether the common bell relay contacts have an interrupted or continuous closure when activated. If interrupted is chosen, the relay follows an internal ring pattern of one second closed followed by three seconds open. By default, all common bell relay pairs are assigned as: DCS Compact II 816 408 / 408i iDCS500 iDCS100 OS500 380x 363–365 362 361 380x 363–365 3991 ACTION DISPLAY 1. Open programming and select 204 Display shows current setting [3 801]C

• SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 213 (Page 1 of 1) MMC: 213 ALARM MESSAGE FOR: DCS CII iDCS100 Purpose: Assigns a name to an alarm sensor. Names are written using the dial keypad. Each press of a key selects a character and moves the cursor to the next position. For example, if the

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 104 (Page 1 of 1) MMC: 104 STATION NAME FOR: ALL SYSTEMS Purpose: Enters a name, up to 11 characters, to identify an individual keyset. The name will display in the keyset’s LCD. Names are written using the keypad. Each key press moves the cursor and enters the selected character.* For example, if the name is “SAM SMITH”, press the number “7” four times to get the letter “S”. Now press the number “2” once to get the letter “A” C

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 717 [Compact I] (Page 1 of 1) MMC: 717 PIN CODE FOR: CI only For iDCS and OS500 MMC 717 UCD Agent PIN , see above Purpose: Assign the PIN code used when a call is routed to the secondary 131 Cable & Wireless network. ACTION DISPLAY 1. Open programming and select 717 Display shows PIN CODE 1: 2. Enter index number (e.g., 2) OR Press VOLUME keys to make selection and press RIGHT soft key to move cursor PIN CODE 2: 3. Enter the desired access code (e.g., 3040506) P

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 507 [iDCS/OS500] (Page 2 of 2) FEATURE KEYS 0 SUN 4 THU 1 MON 5 FRI 2 TUE 6 SAT 3 WED ACTION DISPLAY 1. Open programming and select 507 Display shows RING PLAN (S UN:1) ST: END: 2. Dial day key 0–6 (e.g. 2 for Tuesday) OR Press VOLUME keys to select tone day and press RIGHT soft key RING PLAN (TUE:1 ) ST: END: 3. Dial ring plan number 1–6 (e.g. 2) OR Press VOLUME keys to select and press RIGHT soft key RING PLAN (TUE:2) ST: _ END: 4. Enter Start ti

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 207 (Page 1 of 1) MMC: 207 ASSIGN VM/AA PORT FOR: ALL SYSTEMS Purpose: Enables SLI ports to be designated as NORMAL or VMAA. VMAA ports receive digits designated in MMC 726, VM/AA Options , and also receive a true disconnect signal upon completion of a call. Only SLI cards, not keyset daughter- boards, support disconnect signal. Do not make VMAA ports data as this will return them to a sin

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 403 (Page 1 of 2) MMC: 403 TRUNK TOLL CLASS FOR: ALL SYSTEMS Purpose: Assigns toll class level assignments on a per-trunk or all-trunk basis. Selec- tions can be made for day and night mode, or for each ring plan (1–6), depending on your system. The options for toll level will follow either the station class or the class of service defined in MMCs 702, Toll Deny Table , and 703, Toll Allowance Table. The toll classes available are listed below: ENTRY NUMBER CLASS TYPE DESCRIPTION 0 F-STN Follow station toll restri

• Samsung DCS, SAMSUNG MMC PROGRAM COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 210 (Page 5 of 5) FEATURE DESCRIPTION DCS / C I I 816 408/408i iDCS OS500 REDIAL REVW If ON, when the Redial or LNR key is pressed, keyset users can review previ- ously dialled numbers in the display and select numbers to redial.      ISDN KEYFAC If ON, allows Keypad Facility messages to be sent to the exchange to invoke network features   408i only   CHK SPV TRK Checks the supervision signals on an analogue trunk, such as disconnect clear or polarity reversal.      PRE FWD BUSY E

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 762 (Page 1 of 1) MMC: 762 ROOM COST RATE FOR: DCS CII iDCS100 iDCS500 OS500 Hotel application only Purpose: Sets up room cost rates for each day of the week. Each room cost rate can be assigned with the percentage of the room cost from Sunday to Saturday. For Example: In this MMC you decide to set SAT=150%, SUN=150%, MON=090%, TUE–FRI=100% During the check-in procedure for a guest, if you set £100 for the room cost, the real room cost will be £150 on Saturday and

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 723 (Page 1 of 2) MMC: 723 SYSTEM KEY PROGRAMMING FOR: ALL SYSTEMS Purpose: Refer to the description in MMC 722, Station Key Programming, but note that MMC 723 allows you to program keys for all stations rather than individual stations. Programming in MMC 723 is also done on the basis of keyset type (12-button, 24-button, etc) as shown in the following table. KEYSET TYPE Dial

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 416 [DCS / Compact II] (Page 1 of 1) MMC: 416 ASSIGN AC15 TRANSLATION FOR: DCS CI CII For iDCS/OS500 MMC 416 Assign E&M/DID Ringdown, see below Purpose : Provides an AC15 tie line with the ability to use DDI translation tables. Options are: 0 UNUSE DID TRANS (Follows MMC 406 ) 1 USE DID TRANS (Follows MMC 714 ) ACTION DISPLAY 1. Open programming and select 416 Display shows [7 01] TIE XLATE UNUSE DID TRANS 2. Enter desired trunk number (e.g., 705)

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 120 (Page 1 of 2) MMC: 120 LARGE OPTION FOR: OS500 Purpose: Sets option selections for large LCD phones (ITP/DS-5012L). Option Selection 0 IDLE DISP Display CALENDAR or INFORMATION when phone is in idle state 1 DS KEY DSP Display extension name (EXT NAME) or number (TEL NUM- BER) of Direct Station Selection buttons on LCD 2 DIAL MODE Set OVERLAP or ENBLOC mode 3 CONV DISP SOFT MENU FIRST If selected, features assigned to keys are displayed

• SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 835 (Page 4 of 4) 5. Repeat steps 3–4 for each option as required (to enable/disable or enter value) 6. Press Transfer/TRSF to store and exit OR Press SPEAKER to store and advance to next MMC Default Data: AUDIO CODEC: G.729A ECHO CANCEL: ENABLE SILENCE SUPPRE

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 747 (Page 2 of 2) 7. Enter SURCHARGE, e.g., 100 COST RATE (3) SURCHARGE :100 C 8. Press Transfer/TRSF to store and exit OR Press SPEAKER to store and advance to next MMC Default Data: None Related Items: MMC 110 Station On/Off (Call Cost option) MMC 433 Trunk Cost Rate MMC 746 Costing Dial Plan

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 832 (Page 2 of 2) 6. Press VOLUME keys to select next option (DEL. LENGTH), press RIGHT soft key and enter new data Repeat steps 4–6 for each remaining option 7. Press Transfer/TRSF to store and exit OR Press SPEAKER to store and advance to next MMC Default Data: ACCESS CODE: 00–09=digits 0–9; 10–62=None CODE LENGTH: 1 DELETE LENGTH : 1 INSERT CODE: None IP TABLE 1: 00 IP TABLE 2: None IP START

• Samsung DCS, SAMSUNG MMC PROGRAMS COMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004 MMC 735 (Page 1 of 1) MMC: 735 AA USE TABLE FOR: DCS CII 816 iDCS100 iDCS500 OS500 Purpose: Assigns an AA PLAN TABLE to either an individual AA port or an AA group. AA Plan Numbers are in the range 01 to 12. Note that AA card port numbers differ between systems (see Part 2, section 2.3, System Configuration: Quick Reference). ACTION DISPLAY 1. Open programming and select 735 Display shows (e.g. for Compact I

More Instructions:

	Samsung DCS Programming manual 28-01-2024 276	DOWNLOAD
	Samsung DCS Quick reference manual 01-04-2024 2	DOWNLOAD
	Samsung DCS Operation & user’s manual 26-02-2023 31	DOWNLOAD
	Samsung DCS Operation & user’s manual 12-07-2023 24	DOWNLOAD

Related Products and Documents (Telephone):

Comparable Devices:

Similar Resources:

• Samsung SGH-E600 (31 pages) SGH-E600/E608SERVICE Manual GSM TELEPHONE CONTENTS1. Specification2. Flow Chart of Troubleshooting3. Exploded Views and Parts List4. Electrical Parts List5. Block Diagrams6. PCB DiagramsGSM TELEPHONE …

• Panasonic KX-TG5471 (96 pages) 5.8 GHz Digital Cordless Answering SystemOperating InstructionsModel No. KX-TG5471Pulse-or-tone dialing capabilityThe unit is Caller ID compatible. To display the caller’s name and phone number, you must subscribe to Caller ID service.PLEASE READ BEFORE USE AND SAVE. Panasonic World Wide Web address: http://www.panasonic.comfor customers in the USA or Pu …

• Voxx Accessories Acoustic Research ARVS10 (24 pages) CONFERENCE HUBHANDS-FREE SPEAKERPHONE FOR AUDIO AND VIDEOQuick Start GuideARVS10 QSG 01Instructions en français ..................................9 Instrucciones en español ..............................17 …

• KOCOM KIP-120 (3 pages) KIP-120 Users Manual for Operation and Installation KIP-120 04. 02FND indication House call function Communication possible in the case of a call from guardroom Guardroom version check function House line check function Guard Phone for Apartment Unit PRODUCTMODEL DATE PURCHASEDWARRANTY PERIODAGENCY ADDRESSKOCOM Warranties the original …

• Nortel Meridian SL-1 (62 pages) Integrated Services NetworkMeridian SL-1*QCA144 1.5 MB/S Remote PeripheralEquipment CabinetDescription, Installation and TestingPublication number: Appendix 1 to 553-2601-200Document Status: StandardDate: 88 06 10© 1987 Northern TelecomAll rights reserved.* Meridian and SL-1 are trademarks of Northern Telecom LimitedAppendix 1 to 553-2601-200 …

• Polycom VVX 311 (4 pages) Transferring Calls - Blind To perform a ‘Blind’ transfer – that is, sending the call to another party directly without any consultation… Hold the Transfer button or soft key down for a few seconds and you will be offered a chance to select the ‘Blind’ transfer method. Once ‘Blind’ is selected, dial the number to which you want to transfer the …

Comments, Questions and Opinions: