Toshiba RBM-PMV0363E, RBM-PMV0903E Installation Manual
|
Toshiba RBM-PMV0363E, RBM-PMV0903E, 2 EN CONTENTS Accessory parts and Parts to be procured locally ............................................ 2 1 PRECAUTIONS FOR SAFETY .......................................................................2 2 INSTALLATION OF NEW REFRIGERANT AIR CONDITIONER .................... 3 3 SELECTION OF INSTALLATION PLACE....................................................... 4 4 INSTALLATION OF PMV KIT..........................................................................4 5 REFRIGERANT PIPING .................................................................................. 5 6 FIXATION AFTER CONNECTION PIPES ................
Toshiba RBM-PMV0363E, RBM-PMV0903E, 3 1 PRECAUTIONS FOR SAFETY WARNING • Ask an authorized dealer or qualified installation professional to install/maintain the air conditioner. Inappropriate installation may result in water leakage, electric shock or fire. • Turn off the main power supply switch or breaker before attempting any electrical work. Make sure all power switches are off. Failure to do so may cause electric shock. • Connect the connecting wire correctly. If the connecting wire is connected in a wrong way, electric parts may be damaged. • When moving the a
Toshiba RBM-PMV0363E, RBM-PMV0903E, 4 EN 3 SELECTION OF INSTALLATION PLACE CAUTION Do not install the air conditioner at place where combustible gas may leak. If gas leaks and is collected at surrounding the unit, the production of fire may be caused. Upon customer’s approval, install the air conditioner at a place where satisfies the following conditions. • Place where it can be installed horizontally. • Place which can reserve a service space for safe maintenance or check. • Place where there is no problem even if the drained water flows. Apply electric insulation between metal section of the building and metal section of the air conditioner in conformance with the Local Re
Toshiba RBM-PMV0363E, RBM-PMV0903E, 5 4 INSTALLATION OF PMV KIT WARNING Install the unit securely in the place to sufficiently withstand the weight of the unit. If the foundation is not sturdy enough, the unit may fall and cause personal injury. Perform a specified installation work to guard against earthquake. Improper installation may cause the unit to fall. REQUIREMENT To prevent damage on the PMV Kit or personal injury, follow the instructions below. • Do not step, or put any heavy object on the packed PMV Kit. • When carrying the PMV Kit, hold the two hanging brackets and be careful not to apply excessive force to the refrigerant pipe
Toshiba RBM-PMV0363E, RBM-PMV0903E, 6 EN Outer dia. of copper pipe 6.4 9.5 A R410A 9.1 13.2 +0 - 0.4 A Outer dia. of copper pipe 6.4 9.5 R410A tool used R410A 0 to 0.5 0 to 0.5 Conventional tool used R410A 1.0 to 1.5 1.0 to 1.5 B 5 REFRIGERANT PIPING EN-9 EN-10 Pipe forming/End positioning Flaring 1. Cut the pipe by a pipe cutter. 90° Obliquity Roughness Warp NO GOODOK Outer dia. of copper pipe 6.4 9.5 R410A 1.5 to 2.0 1.5 to 2.0 Work using two spanners Connecting pipe outer dia. (mm) Ø6.4 Ø9.5 Tightening torque (N m) 14 to 18 (1.4 to 1.8 kgf•m) 33 to 42 (3.3 to 4.2
Toshiba RBM-PMV0363E, RBM-PMV0903E, 7 EN-11 EN-12 6 FIXATION AFTER CONNECTION PIPES 1. After connection to pipes, fix the PMV Kit using the attached binding band so that it is held closely to the gas pipe. Binding band L Binding band M Binding band M Heat insulating pipe Refrigerant pipe (Liquid side) Heat insulating pipe Refrigerant pipe (Liquid side) Binding band M Binding band L Binding band M Refrigerant pipe (Gas side) 1 m or less Hanging boltHanging bolt PMV Kit Refrigerant pipe Insulator or cushion material (Locally procured) Insulator or cushion material (Locally procured) 2. To avoid propagation of sound or vibration, wrap cushion material around the liquid pipes of PMV Kit, and then set with the hanging bolts w
Toshiba RBM-PMV0363E, RBM-PMV0903E, 8 EN <Completed mounting drawing> Bundling band M Connection wire Additional clamp filter Lock securely with claws 2 turns Pass the lead wire through the inner part two times. Additional clamp filter (Model name: ZCAT3035-1330) Clamp filter Clamp filter (Formerly attached) (Formerly attached) Clamp filter (Formerly attached) Claws To PMV kit main body Connection wire EN-13 EN-14 7 ELECTRIC WORK Wire connections Use the supplied, dedicated wires. REQUIREMENT • Check that power is not supplied to the indoor unit before connecting wires. • Be sure to put wires through the wire connecting ports on the PMV Kit and
9 7 ELECTRIC WORK 4) Open the connector cover of the indoor unit after power-off and then process wiring work. EN-15 EN-16 Screw Connector cover <Opening the connector cover for 4MH(2H) series> 5) Remove the connector conversion cable which is attached to the connection cable (11m) out of the box. 6) Replace the PMV connector built in the indoor unit with the connection cab
Toshiba RBM-PMV0363E, RBM-PMV0903E, 10 EN EN-17 EN-18 7 ELECTRIC WORK • Work procedure 3 (In case of indoor unit which additional clamp filter and the connector conversion cable are used) Applicable model: The all indoor units except High Wall type The work procedures from 1), 2) and 3) are same to those in the work procedure 1. • Attach the additional clamp filter near the indoor unit, and make sure the attach location is different depending on the indoor unit type. 4) Open the connector cover of the indoor unit after power-off and then process wiring work. 5) When the product was shipped from the factory, PMV connector built in the indoor unit is connected to C
Toshiba M200 - Portege - Pentium M 1.5 GHz Control Unit Maintenance manual
M200 - Portege - Pentium M 1.5 GHz |
Toshiba Satellite 3000 Series Control Unit Replacement manual
Satellite 3000 Series |
Toshiba M2 Control Unit Operation & user’s manual
M2 |
Toshiba PDP002Z Control Unit Function manual
PDP002Z |
Toshiba TECRA S1 Series Control Unit Operation & user’s manual
TECRA S1 Series |
Toshiba 3000-S304 Control Unit Operation & user’s manual
3000-S304 |
Toshiba TOSVERT VF-A7 Control Unit Instruction manual
TOSVERT VF-A7 |
Toshiba TECRA S1 Series Control Unit Specifications
TECRA S1 Series |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Shure | Microflex MX100 Series | Manual | shure/microflex-mx100-series-AMG.pdf | 12 Sep 2022 | 16 | 1.42 Mb |
2 | Tektronix | 480X | Operation & user’s manual | tektronix/480x-R7A.pdf | 21 Feb 2023 | 136 | 2 Mb |
3 | Cisco | CRS-1 - Carrier Routing System Router | Getting started manual | cisco/crs-1-carrier-routing-system-router-42G.pdf | 19 Aug 2022 | 289 | 4.53 Mb |
4 | CyberPower | HT1108TNCGRU1 | Operation & user’s manual | cyberpower/ht1108tncgru1-5N3.pdf | 16 Oct 2022 | 2 | 3.07 Mb |
5 | AEG | U 86000-4 | Operating instructions manual | electrolux/u-86000-4-79G.pdf | 27 Jul 2023 | 28 | |
6 | Uniflame | CBC730W-C | Owner's manual | blue-rhino/cbc730w-c-99N.pdf | 03 Aug 2023 | 16 | 5.82 Mb |
Sun Microsystems
901 San Antonio RoadPalo Alto, CA 94303 USA650 960-1300 fax 650 969-9131A Sun Microsystems, Inc. BusinessSun™Ultra™2 Series to Sun™Ultra™60 System UpgradeGuidePart No.: 805-1767-10Revision A, December 1997
…
Sun Ultra 60(28 pages) |
Honeywell
K3790V1 6/07 Rev. AADEMCO 5800RL Wireless Relay ModuleINSTALLATION AND SETUP GUIDE INTRODUCTION The ADEMCO 5800RL is a Wireless Relay Module that enables use of remote sounders and/or remote arm/disarm indicators using two relays activated by wireless signals from the LYNX control (see Figure 1). The 5800RL can also send tamper and supervision signals to …
ADEMCO 5800RL(2 pages) |
Festo
Translation of the original instructionsPI PROFIBUS PROFINET®, PROFIsafe® are registered trademarks of the respectivetrademark owners in certain countries.1 Safety instructionsInstallation and commissioning must be carried out only by properly qualified personnel in accordance with these operating instructions.WARNING!Nonobservance of safety regulati …
CPX-FVDA-P2(6 pages) |
MITECH
UsermanualforNFCMCUModelnumberNFCMCU.Contents1.Introduction2.SystemOverview3.Installation4.Operation5.ComplianceStatements6.TechnicalSpecification1.IntroductionThisdocumentistheusermanualfortheMitechIntegratedSystemsRFIDmodule–NFCMC …
NFCMCU(4 pages) |
WAREMA
816835_c•en•12.07.2011We reserve the right to carry out improvements1Operating and installation instructionsGA KompaktKeep for future use!Valid from 20 July 2011GeneralFig. 1 GA Kompakt REGThe floor distribution control (GA) enables the central control of the motor control units of a floor. The control signals from the sun shading control system are for …
GA Kompakt(4 pages) |
Huawei
01Installation Preparations1Clearances and Cabinet Description (1200 kVA)Clearances and Cabinet Description (1600 kVA)1. Before installation, read the user manual carefully to get familiar with product information and safety precautions.2. Use insulated tools when installing the equipment.3. Only engineers certified by Huawei or its agent are allowed to inst …
UPS5000-H Series(8 pages) |
Zte Network Router ZXHN H108L#NIH627: ZXHN H108L Network Router Maintenance manual ZXHN H108L, 89 |
CYP Media Converter SY-HDVGA-4K22Operation manual for CYP SY-HDVGA-4K22 Media Converter SY-HDVGA-4K22, 20 |
Lexmark Printer W812PDF User Manual (@S1311D), Lexmark W812 Printer (26th Jan 2024) W812, 2 |
Audiovox Automobile Accessories 50-0286x-019 Series#6X923V 50-0286x-019 Series: Audiovox Automobile Accessories Owner Documentation 50-0286x-019 Series, 6 |
Baumatic Hob BH644TCSS#H23BW1: BH644TCSS Hob Operation & user’s manual BH644TCSS, 32 |
Ask Proxima Projector A4Operation & user’s manual for Ask Proxima A4 Projector A4, 41 |
Samsung Cell Phone GT-S5310Guide: Samsung GT-S5310 (1475AR, Upd.Tuesday 23-01-2024) GT-S5310, 100 |
Echo Blower PB-1000Blower Operator's manual (Echo PB-1000) PB-1000, 24 |
Healthmark Digital Camera FIS-001Digital Camera PDF User manual manual FIS-001, 33 |
Sony Plasma TV KE-P37M1Sony KE-P37M1 Plasma TV Operating instructions manual KE-P37M1, 204 |
Wildfier Scooter WFH150-TWildfier Scooter Owner's manual (File: wildfier-wfh150-t-scooter-8, Friday 26-01-2024) WFH150-T, 8 |