GE 45602 Operation & User’s Manual

Text of GE 45602 User Guide:

• GE 45602, Introduction: Thank you for your purchase of a GE Z-Wave ® control device. Z-Wave ® technology is designed to automate lighting/home control and provide easy remote operation of all your Z-wave ® enabled devices. The GE Z-Wave ® product family includes a variety of devices to control lighting in your home. It is up to you whether you want to control one room or your entire house and whether you want to do it all now or start with one room and add more over time. This module is one compon

• GE 45602, Manual/Program button Standard AC outlet Z-wave outlet (other end) to the system and will also act as range extenders if they support this function of repeating the signal received to other nodes in the system. The incandescent lighting plugged into the Z-Wave ® controlled outlet on this module must not exceed 300 watts. DO NOT use with fluorescent lighting. Plugging a non-resistive load such as fluorescent lighting or a device with a motor into the Z-Wave ® controlled outlet may result in damage to the Lamp Module and will void the

• GE 45602, There are no user serviceable parts in this unit. To reduce the risk of electric shock, this product has a grounding type plug that has a third (grounding) pin. This plug will only fit into a grounding type power outlet. If the plug does not fit into the outlet, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. RISK OF FIRE RISK OF ELECTRICAL SHOCK RISK OF BURNS WARNING The Load-Sense feature on this Z-Wave product will turn the power to the connected de

• GE 45602, Wireless Range This device complies with the Z-Wave standard of open- air, line of sight transmission distances of 65 feet. Actual performance in a home depends on the number of walls between the remote controller and the destination device, the type of construction and the number of Z-Wave enabled devices installed in the control network. GE Z-Wave Network Every Z-Wave enabled device acts as a signal repeater and multiple devices result in more possible transmission routes which helps eliminate “RF dead-spots”. Things to consider regarding RF range: - Each wall or obstacle (i.e.: refrigerator, big screen TV,

• GE 45602, Effects of Home Construction on Wireless Range Between Z-Wave Enabled Devices. Note: The distances shown in the table below are typical examples. Actual performance in your home will vary. From the Remote (or repeating Z-Wave module) to destination device: * For Plug-in Modules or In-Wall Devices Installed in Plastic Junction Boxes ** Line of Sight / no obstructions Type of Construction 0 ** 1 Number of Walls or Obstacles 2 3 100’ 70’ 49’ 34’ 80’ 56’ 39’ 27’ 100’ 60’ 36’ 21’ 80’ 48’ 29’ 17’ Wood Frame w/Drywall Plastic J-Boxes* Metal J-Boxes Plasti

• GE 45602, Please Note: Z-Wave home control networks are designed to work properly alongside 802.11 wireless computer networks, Bluetooth and other 2.4GHz or 5.8GHz devices. Some baby cams, wireless video devices and older cordless phones using the 900MHz frequency range may cause interference and limit Z-Wave functionality. Many 900MHz products have a switch to select channel “A” or “B”. You may find that one of these channels will cause less interference than the other. Key Features: - One Z-wave controlled AC outlet for standard incandescent lighting - Remote ON/OFF and Brightness control via the Z-Wave controller - Manual ON/OFF and Brightness control with the front pane

• GE 45602, Basic Operation The connected light can be turned ON in three ways: With a Z-wave remote. Manually with the pushbutton on the Z-Wave module. By the Load-Sensing feature. Normally, the Z-Wave module controls the ON/Off state of the connected light and power is either turned On or Off at the module (either manually or by the remote). If the switch on the connected light is used, the Z-Wave control circuitry automatically senses that the light is being turned On and activates the Z-wave controlled outlet, providing power to the connected device. This feature is disabled by default; see the section on advanced operation for instructions on ho

• GE 45602, 2. Adjust the brightness level of the connected lighting by pressing and holding the button. Release the button when the desired level is attained. - This is also a toggle function. The lighting will dim until the minimum level is attained or the button is released. The next time the button is pressed and held, the level will increase until the maximum level is attained or the button is released. 3. Include or exclude the module from the Z-Wave home control network with your primary controller. - Refer to the instructions for your primary controller to access the setup function and in

• GE 45602, All On/All Off Depending upon your primary controller, the 45602 lamp module can be set to respond to ALL ON and ALL OFF commands in up to four different ways. Some controllers may not be able to change the response from its default setting. Please refer to your controller’s instructions for information on whether or not it supports the configuration function and if so, how to change this setting. The four possible responses are: - It will respond to ALL ON and the ALL OFF commands (default). - It will not respond to ALL ON or ALL OFF commands. - It will respond to the ALL OFF command b

• GE 45602, Dim Rate Adjustments Both the number of steps (or levels) that the dimmer will change and the timing of the steps can be modified to suit personal preferences. The timing of the steps can be adjusted in 10 millisecond intervals. As an example, the default setting for parameter 8 is “3”. This means that the lighting level will change every 30 milliseconds when the Dim Command is received. A value of 255 would mean that the level would change every 2.55 seconds. Combined, the two parameters allow dim rate adjustments from 10 milliseconds to 4.2 minutes to

• Ignore Start Level When Receiving Dim Commands Please note: Every “Dim” command from your remote controller includes a start level embedded in it. The 45602 can be set to ignore the start level that is part of the dim command. Setting parameter 5 to a value of 0 will cause the 45602 to dim or brighten from the start level embedded in the command. - Parame

• GE 45602, Interoperability with Z-Wave ™ Devices A Z-Wave ™ network can integrate devices of various classes, and these devices can be made by different manufacturers. Although every Z-Wave certified product is designed to work with all other Z-Wave certified products, your controller must include the appropriate device classifications in order to control non-lighting Z-wave devices. As an example, the GE 45600 Basic Remote is designed only for controlling Z-Wave devices using the lighting control classification. The GE 45601 Advanced Remote with LCD readout can control other Z- Wave certified devices like thermostats as well as lighting. WARRANTY JASCO Products

• FCC U2Z45602-3 The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph: The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipm

• GE 45602, Important Note: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device. Compliance with IC Rules and Regulations IC: 6924A-45602A3 Jasco Products Company Model: 45602 ZW3101 This Class B digital device complies with Canadian ICES-003. SPECIFICATIONS Power 120VAC, 60Hz Signal (Frequency) 908.42 MHz Maximum load for both outlets 15 Amps, 1800W

• GE 45602, is a registered trademark of General Electric Company and is used under license to Jasco Products Company LLC, 10 E Memorial Rd., Oklahoma City, Oklahoma 73114 Made in China Hecho en China All brand names shown are trademarks of their respective owners. Todas las marcas que aparecen aquí son marcas registradas de sus respectivos dueños. GE SmartHome ™ 45602-2 1/08/09

Related Products and Documents (Indoor Furnishing):

Comparable Devices:

Similar Resources:

• AirComfort DREAM EASY (2 pages) DREAM EASY QUEEN AIR MATTRESS   |� …

• Okamura Alsos Beans 8610AZ (4 pages) Assembly precautionsInstallation precautionsHandling precautionsCleaning precautions● Be sure to carefully read these assembly and usage instructions to ensure correct assembly of this product. Incorrect assembly is dangerous and could cause the chair to flip over, resulting in an injury or damage.● Position the product on a level, stable surface. If y …

• American Standard Two-Handle Centerset Lavatory Faucet 2930 (2 pages) TWO-HANDLE CENTERSETLAVATORY FAUCETGENERAL DESCRIPTION:Centerset lavatory faucet on 4" centers. Durable cast brass construction. One-half inch male inlet shanks with brass coupling nuts. Compression valving. Metal Lever Handles with hot and cold indicators. All brass drain bodies with 1-1/4" (32mm) tailpieces. 2.2 gpm/8.3L/min. maximum flow rate. …

• Fackelmann LUGANO (16 pages) 5BB0736001 S1/13 24/13 LUGANOØ8GmbH + Co. KGPostfach 280 • D-91211 HersbruckTel.: 09151/811-0 • FAX: 09151/811-294Servicetelefon: 09151/811-206www.fackelmann.de736037360573703737057360973600738037380573903739057360973600Seite / page: 4 - 5Seite / page: 6 - 7 …

• GrainWood Greenport GP0703 (13 pages) Assembly InstructionsThank you for choosing Grain Wood Furniture, it is an honor to be in your home! If you have any questions, feedback, or need replacement parts please contact us at:grainwoodfurniture.com/help or [email protected] assemblyPH #2Made in BrazilREV - 07/2021 page 1/13Greenport Collection5-Drawer ChestGP0703GP0716Brushed W …

• TREX Outdoor Furniture Rockport Club Settee TXC47 (2 pages) 01/17/201920-Year WarrantyTo view our full warranty, please visit trexfurniture.com/warranty trexfurniture.comShare your space We love to see where our furniture ends up — snap a pic and share it with us on Facebook! facebook.com/trexfurnitureAssembly InstructionsCleaning Tips Keep your Trex Outdoor Furniture™ looking brand new: For a quick clean:Sim …

Comments, Questions and Opinions: