Belkin F5D5730au Operation & User’s Manual

Text of Belkin F5D5730au User Guide:

• Belkin F5D5730au, Belkin Tech Support Australia: 1800 666 040 New Zealand: 0800 441 913 Singapore: 800 616 1790 US: 310.898.1100 ext 2263 Belkin Corporation 501 West Walnut Street Compton • CA • 90220 • USA Tel: 310.898.1100 Fax: 310.898.1111 Belkin Components, Ltd. Express Business Park Shipton Way • Rushden • NN10 6GL United Kingdom Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 Belkin Components B.V. Starparc Building • Boeing Avenue 333 1119 PH Schiphol-Rijk • The Netherlands Tel: +31 (0) 20 654 7300 Fax: +31 (0) 20 654 7349 Belkin Components, Ltd. 7 Bowen Crescent • West Gosford NSW 2250 • Australia Tel: +61 (0) 2 4372 8600 Fax: +61 (0) 2 4372 8603 P74476a

• Belkin F5D5730au, TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Knowing your Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . .

• Belkin F5D5730au, 1 INTRODUCTION Thank you for purchasing the Belkin High-Speed ADSL Modem with USB and Ethernet. This Modem will allow you to surf the Web and connect to some popular game consoles. Features • RJ45 Ethernet interface support via crossover cable; USB interface support • IEEE 802.3 standard 10/100Mbps compliance • DHCP Server • ANSI T1.413 Issue 2, ITU-T G.DMT (G.992.1), G.Lite (G.992.2) and G.hs (G.994.1) • IP Sharing via NAT routing function (Network Address Translation) • NAT function for NetMeeting ® , ICQ ® , CU-SeeMe ® , etc

• Belkin F5D5730au, INTRODUCTION 2 System Requirements PC running Windows® 98SE , Me, 2000, XP CD-ROM drive (For USB Installation Only) One free USB port (For USB Installation Only) One RJ45 Ethernet port (Ethernet Installation Only)

• Belkin F5D5730au, 3 KNOWING YOUR MODEM (1) (2) Front of Modem 1. ADSL ON ADSL Connected OFF No ADSL Detected Blinking Connecting/Handshaking 2. LAN ON Ethernet Connected OFF No Ethernet Connection Blinking Data Transmitting

• Belkin F5D5730au, 4 Back of Modem KNOWING YOUR MODEM Before You Start Before you start to use your Modem you must have the following: 1. An active ADSL account and line with a user name and password. 2. IP address, DNS, and gateway settings from your ISP only if applicable. 3. At least one computer with either USB or Ethernet connection. 4. TCP/IP networking protocol installed on the computer (most computers have this installed by default). 5. Microsoft® Internet Explorer 5.0 or Netscape® 4.5 or greater installed. 6. It may be necessary to disable any firewall or anti-virus software during installation. It may prevent successful installation.

• Belkin F5D5730au, 5 INSTALLATION 5 You can connect your equipment in one of two ways: via an Ethernet crossover cable or a USB connection. If you are connecting via an Ethernet crossover connection then follow the diagram below and proceed to “Installation Method 1” on page 6. If you have chosen to connect via a USB connection, make sure the computer you are connecting to is switched off. Use the diagram below and then proceed to “Installation Method 2” one page 6.

• 6 INSTALLATION 6 Installation Method 1 - Ethernet 1. Make sure that the computer that you are connecting to is powered off. 2. Connect one end of the Ethernet crossover cable to your Modem’s Ethernet port; connect the other end to your computer’s Ethernet port. 3. Connect the RJ11 phone line provided for ADSL into the line socket in the Modem. 4. Connect the power

• Belkin F5D5730au, 7 INSTALLATION Modem Configuration Enter the default user name and password and click “OK”. If you do not see the screen below then turn to “Annex A Problem 1”. Default User Name: admin Default Password: password You will then be logged into the web interface of the Modem.

• INSTALLATION 9 3. For New Zealand users, change the “VPI” to “0” and the “VCI” to “100”—by default this is set to 8/35. Set the “ENCAPSULATION” to “PPPoA VC-Mux” — the default is PPPoE LLC. For Australian users, ensure the “VPI” is “8” and the “VCI” is “35” and the “ENCAPSULATION” is “PPPoE LLC”. (By default this should alre

• Belkin F5D5730au, INSTALLATION 10 h. Authentication: Select “Auto”. i. Automatic Reconnect: Should remain checked. 6. Scroll down to the bottom of the screen and you will see the following. 7. Click the “Submit” button to update the changes and then scroll back to the bottom of the screen and then click on “Save Configuration”. 8. The screen will change and you will see the following. Click on “Submit” to make the change to the Modem. 9. The Modem will restart and the LAN connection will be reestablished between your PC and your Modem. You will see the fol

• Belkin F5D5730au, INSTALLATION 11 10. When you see this screen, the Modem has rebooted and is ready to be connected to ADSL. 11. On the left of the screen under the Status settings in your browser, click on “PPP”. You will then see the following.

• Belkin F5D5730au, INSTALLATION 12 12. Ensure that “Connect” is displayed in the drop-down window and then click on the “Execute” button. The Modem will initiate the connection to your ADSL provider and the screen shot will look similar to this one once connected. Note that under the “Status” column it will indicate “connected” once your ADSL connection is running. 13. You can successfully close this browser window and open a new browser window and surf the Internet.

• Belkin F5D5730au, ANNEX A – TROUBLESHOOTING Problem My Internet web browser would not display the login dialogue box when I typed in the numbers “10.0.0.2”. Solution •Check that your browser address bar displays nothing except “10.0.0.2”. •Check that your PC is configured to accept IP addresses dynamically by doing the following: Solution for Windows 98 and Me 1. Go to “Start / Settings / Control Panel”. In the Control Panel, double-click on “Network” and choose the “Configuration” tab. 2. Select “TCP / IP”, or the name of your Network Interface Card (NIC) in your PC. 3. Click “Properties”. 4. Select the “IP Address” tab. In this page, click “Obtain a

• Belkin F5D5730au, ANNEX A – TROUBLESHOOTING 14 6. Select the “Disable DNS” radio button and click “OK” to finish the configuration. Solution for Windows 2000 1. Go to “Start / Settings / Control Panel”. In the Control Panel, double-click on “Network and Dial-up Connections”. 2. Double-click “LAN Area Connection”.

• Belkin F5D5730au, ANNEX A – TROUBLESHOOTING 16 5. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Click “OK” to finish the configuration. Solution for Windows XP 1. Go to Control Panel on your computer and double-click “Network Connections” and right-click your network connection and select “Properties”.

• Belkin F5D5730au, ANNEX A – TROUBLESHOOTING 17 2. Highlight “Internet Protocol (TCP/IP)” and select “Properties”. If you do not have TCP/IP displayed in the list then you will need to install TCP/IP before proceeding. 3. Ensure that: “Obtain an IP address automatically” and “Obtain DNS server address automatically” is selected and then hit “OK” twice.

• Belkin F5D5730au, ANNEX B – FAQs 18 Can I connect two computers to my modem, one via Ethernet and one via USB, and be on the Internet with both computers at the same time? Yes, it is possible to have two computers using the Modem at the same time via USB and Ethernet. It is also possible to share files between the two computers. Can I connect my Modem to a hub and have multiple computers share the Internet at the same time? You can connect your PC to the modem using the USB cable and have the Ethernet cable from your Modem running into a hub, then attach your additional computers to the hub and access the Internet at the same time. I want to create a wireless network. Wi

• ANNEX B – FAQs 19 Where can I get help configuring my modem in New Zealand or Australia? You can call our technical support on the following numbers. Before calling, ensure that you have your ISP settings such as username and password. New Zealand – 0800 441 913 Australia – 1800 666 040 Where can I get more information on networking my home or office? You can access our website a

• 20 INFORMATION FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, F5D5730au to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

Related Products and Documents (Modem):

Comparable Devices:

Similar Resources:

• AOR ARD9900 (38 pages) ® ARD9900 FAST RADIO MODEM Multi-Mode and Digital Voice Interface Operating manual AOR, LTD. …

• Paradyne 6205 (12 pages) Hotwire® 6205 ADSL Modem Installation Instructions Document Number 6205-A2-GZ40-00 July 2004 Introduction Congratulations on becoming the owner of a Hotwire® ADSL USB Modem. You will now be able to surf the Internet via the modem’s state-of-the-art ADSL connection. This document will show you how to set up the Hotwire 6205 ADSL Modem, and how to custo …

• Sierra Wireless AirLink RV50 Series (2 pages) SIM CardReset12AirLink® RV50 Quick Start GuidePage 1© 2016 Sierra Wireless All Rights Reserved PN 2400505 Rev. 1This guide provides instructions for quickly getting your Sierra Wireless® AirLink® RV50 gateway con gured and connected.For more information refer to the:• AirLink RV50 Hardware User Guide• ALEOS® Software Con guration User …

• RACOM RE400 (4 pages) Quick Start - RE4006/1/20101. The first start of radio modem• Don’t connect radio modem in your LAN before settings! Default IP address of radio modem maybe already used in your network.• Do not switch on more than one radio with default settings at any one time! Only switch on the nextone after setting and storing IP parameters in the first one.• In …

• Cermetek CH1794 (19 pages) HIGH SPEED Modem and FAX FAMILY CH2056/TBR/ETBR – V.90 / 57,600bps/TBR21 CH1799/TBR/ETBR – V.34bis / 33,600bps/TBR21 CH1794 – V.32bis / 14,400bps 2003 Cermetek Microelectronics, Inc. Page 1 Document No. 607-0003 Revision K3 (09/03) FEATURES • Supports V.90, V.34bis, V.34, V.32bis, V.32, V.22bis, V.22A/B, V.23, V.21, Bell 212A and …

• D-Link DCM-3012G (5 pages) DCM-3012G VoIP Cable Modem Quick Installation Guide Unpacking and Inspection  DCM-3012G cable modem * 1  RJ-45 CAT 5e cable * 1  12 V/2.0A Power Adapter * 1  QIG * 1 Rear Panel and Hardware Connection This chapter describes the proper steps for connecting your cable modem. Please be sure to follow the steps in the sequence outlined below. …

Comments, Questions and Opinions: