HP 3535437 Operation & User’s Manual

Text of HP 3535437 User Guide:

• HP 3535437, B–2 v52 Monitor Guide Technical Specifications Operating Temperature 50 ° F to 95 ° F 10 ° C to 35 ° C Storage Temperature –22 ° F to 140 ° F –30 ° C to 60 ° C Humidity 20% to 80% (non-condensing) Altitude Up to 10,000 ft./3048 meters MPRII Some models meet MPRII Plug and Play Yes v52

• HP 3535437, 4–8 v52 Monitor Guide Operation Using the Energy Saver Mode Your monitor is designed to meet strict Environmental Protection Agency (EPA) Energy Star requirements for reduced power consumption. Using a combination of hardware and software functions, this energy-saving feature allows your computer to control your monitor’s power consumption and reduce your monitor’s power state when not in use. ✎ Your monitor’s energy saver feature works only when your monitor is connected to a computer that also has energy saver features. The Energy Saver utility, with its energy saving features, is available with all Microsoft Windows

• HP 3535437, v52 Monitor Guide 1–1 1 Introduction Your microprocessor-based, digitally controlled color monitor is a high-performance and easy-to-use product. It employs the latest on-screen menu technology. Kit Contents Your monitor kit should contain: ■ CRT monitor ■ Monitor Base (pre-attached on selected models) ■ AC power cord ■ Speakers ■ Speaker power adapter ■ Documentation kit

• HP 3535437, v52 Monitor Guide C–3 Agency Regulatory Notices EPA Energy Star Compliance Monitors that are marked with the Energy Star Logo meet the requirements of the EPA Energy Star program. As an Energy Star Partner, Hewlett-Packard Company has determined that this product meets the Energy Star guidelines for energy efficiency. Specific details on using the Energy Saving features can be found in the energy saver or power management section of the computer manual. Power Cord Set Requirements The power cord used with your monitor must be rated for the product and for the voltage and current marked on the product’s electrical ratings la

• HP 3535437, v52 Monitor Guide A–3 Troubleshooting Preparing to Call Technical Support If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support. Have the following information available when you call: ■ The monitor ■ Monitor model number ■ Serial number for the monitor ■ Purchase date on invoice ■ Conditions under which the problem occurred ■ Error messages received ■ Hardware configuration ■ Hardware and software you are using No sound from left speaker. Speaker audio cable is disconnected. Make sure the speaker connection from the left-side speaker is connected to the rear of the right-side

• HP 3535437, v52 Monitor Guide 4–1 4 Operation Information Files The CD-ROM included with this monitor contains two data files that must be installed onto your computer: An .INF file and an .ICM file. The .INF file designates software and defines monitor resources used by Microsoft Windows to ensure monitor compatibility with the graphics adapter in your computer. The .ICM file provides color matching consistency between your monitor screen and your printer. Once installed, this file is activated by graphics programs that have this color-matching feature. To install these files on your computer: 1. Insert the CD-ROM disc th

• HP 3535437, 4–2 v52 Monitor Guide Operation 3. Click the Settings tab. 4. Click Advanced Properties or Advanced, and select the Monitor tab. 5. Click Properties. 6. Click the Driver tab. 7. Click Update Driver and click Next. 8. Select the recommended option, and then click Next. 9. Select the Specify a Location box. 10. Find and open the hp_v52.inf file on the CD-ROM disc in the Drivers directory, and click OK. 11. Click Next to install the monitor driver. Windows Me users ✎ The procedure for installing the driver for your operating system may vary. To install the driver for the v52 monitor: 1. Click Start, select Settings, and then

• HP 3535437, A–2 v52 Monitor Guide Troubleshooting Image is not centered. Horizontal position may need adjustment. Press the SELECT button to access the On-Screen Display. Select H. Position to adjust as needed. Vertical position may need adjustment. Press the SELECT button to access the On-Screen Display. Select V. Position to adjust as needed. “No Signal” is displayed on screen. Monitor video cable is disconnected. Connect the 15-pin monitor video cable to the computer. Be sure that the computer power is on. “Out of Frequency” is displayed on screen. Video resolution and/or refresh rate are set higher than what your monitor supports. Restart your c

• HP 3535437, C–2 v52 Monitor Guide Agency Regulatory Notices Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions regarding your product, contact: Hewlett-Packard Company P.O. Box 69200, Mail

• HP 3535437, 4–4 v52 Monitor Guide Operation On-Screen Display The On-Screen Display (OSD) adjusts the screen image based on your viewing preferences. To access the OSD, do the following: 1. If the monitor is not already on, press the Power button to turn on the monitor. 2. Press the Select button to display the On-Screen Display menu. A screen similar to this one appears. For a description of the icons that appear on the screen, see “On-Screen Display Functions” later in this chapter. ✎ Not all OSD features are available on all models. The OSD for your m

• v52 Monitor Guide 4–3 Operation 7. Select the Monitor tab. 8. Click Properties. 9. Select the Driver tab. 10. Click Update Driver and click Next. 11. Select the recommended option, and then click Next. 12. Select the Specify a Location box. 13. Find and open the hp_v52.inf file on the CD-ROM disc in the Drivers directory, and click OK. 14. Click Next to install the monitor driver. Front Panel

• HP 3535437, 3–2 v52 Monitor Guide Installation Monitor Installation Before installing your monitor, place it in a convenient, well-ventilated location near your computer. 1. Turn off the power to your computer and other peripheral devices. 2. Connect the video cable (blue connector) 1 from the back of the monitor to the blue 15-pin connector on the back of the computer. Tighten the cable screws to secure the cable to the connector. Ä CAUTION: To avoid damaging the video cable, ensure that the cable a

• HP 3535437, © 2003 Hewlett-Packard Company. All rights reserved. Hewlett-Packard is a registered trademark of Hewlett-Packard Company in the United States of America and other countries/regions. Other brand or product names are trademarks of their respective holders. The information in this document is subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. HP shall not be liable for errors contained herein

• HP 3535437, v52 Monitor Guide 2–3 Safety and Maintenance Guidelines Removing the Monitor Base In the event that you need to disassemble the base from the monitor, follow these instructions: 1. If you must remove the base attachment, release the catch and slide the base toward the back of your monitor. 2. Lift the base up and away from your monitor.

• HP 3535437, v52 Monitor Guide B–1 B Technical Specifications HP Pavilion v52/15" Monitor v52 Screen Size 15" (38 cm) visual diagonal Viewable screen size 13.8" (35 cm) Dot Pitch 0.28 mm (Diagonal) Display Area Default 199 × 265 (mm) typical Display Colors Infinite Display Resolutions 640 x 480 640 x 480 640 x 480 720 x 400 800 x 600 800 x 600 1024 x 768 Refresh Rates 60 Hz 75 Hz 85 Hz 70 Hz 75 Hz 85 Hz (preferred resolution) 60 Hz (maximum resolution) Synchronization (Horizontal) 30 to 54 KHz Synchronization (V

• v52 Monitor Guide 4–7 Operation Out of Frequency Range Message If an Out of Frequency Range message is displayed on your monitor, your video resolution and/or refresh rate are set higher than the levels your monitor supports. To change the video resolution or refresh rate on your monitor, follow these steps: 1. Restart your computer. 2. Enter Safe Mode on your com

• HP 3535437, iv v52 Monitor Guide Contents Agency Regulatory Notices Federal Communications Commission Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–1 Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–1 Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–1 Declaration of Conformity for Products Marked with FCC Logo, United States Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C

Related Products and Documents (Monitor):

Comparable Devices:

Similar Resources:

• Panasonic TH-42PH10BK (142 pages) © 2007 Matsushita Electric Industrial Co., Ltd. Allrights reserved. Unauthorized copying anddistribution is a violation of law.TH-42PH10BKTH-42PH10BSTH-42PH10EKTH-42PH10ESGPH10D ChassisHigh Definition Plasma DisplaySpecificationsPower Source 220-240 VAC, 50/60HzPower ConsumptionPower on 365 WStand-bycondition Save OFF 1.0 W, Save ON 0.8 WPower off condition …

• Hyundai K224W (2 pages) Hyundai LCD monitors with tech-oriented experience provide the various range of product, appropriate to the requirement in each segment groups, And also, Hyundai LCD monitor enable to make the digital environment through dexterous compatible application to the equipments.“Certified for Window Vista Premium” ensures the reliability, security, proper insta …

• Sceptre BT14 (16 pages) iPREFACE About this manual This manual is designed to assist you in setting up and using the LCD Monitor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. This document contains proprietary informa …

• LG E2210P-BN (30 pages) www.lg.comOWNER’S MANUALLCD MONITOR LCD MONITOR MODELE2210PPlease read this manual carefully before operating your set and retain it for future reference.ENGLISH …

• Samsung UD22B (145 pages) BN46-00286A-02User ManualUD22BThe color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. …

• HP L1745 (7 pages) 1.1.1.1.Auto Adjust4.4.4.4.OSD Navigation/Input Select2.2.2.2.Menu/Select5.5.5.5.Power3.3.3.3.OSD Navigation/Input Select ModelsModelsModelsModels Part NumberPart NumberPart NumberPart Number: GE178AA#ABA HP Care Pack ServicesHP Care Pack ServicesHP Care Pack ServicesHP Care Pack Services 4 Year Next Business Day Warranty ExtensionU7934E5 Year Next Busin …

Comments, Questions and Opinions: