Philips 64331 Operation Manual

Text of Philips 64331 User Guide:

• Philips 64331, Moving Light (ML) Mode 25 200 Plus Series Console • SOFTKEY B "Down" will lower the value • SOFTKEY C ">" is used to navigate between fields. To rapidly change values hold down the Softkey or use the SOLO fader to change the values extremely quickly. To store your changes use the SOFTKEY D for "Enter". If you wish to leave this screen without storing any changes press the MENU button. It will return you to the previous screen. ML Patch First you need to allocate each fixture in yo

• Philips 64331, Moving Light (ML) Mode 27 200 Plus Series Console Figure 25: Moving Light Attributes - Video Monitor Display Note: The bottom right display shows the attributes and their settings for the currently selected fixture. The bottom left window shows the DMX address for each fixture. The parameters are always controlled by Faders 21 through 24. Fader 21 is always used for Pan, Fader 22 for Tilt and Fader 23 for Color and are labeled accordingly. Fader 24 can have any of the other attributes that fixture has assigned to it for adjustment. Your console allows you to edit and record various scenes for a patched moving light. You may set the Pan, Tilt, Intensity, Color and any other attr

• Philips 64331, 1 200 Plus Series Console IMPORTANT INFORMATION Warnings and Notices Additional Resources for DMX512 For more information on installing DMX512 control systems, the following publication is available for purchase from the United States Institute for Theatre Technology (USITT), "Recommended Practice for DMX512: A Guide for Users and Installers, 2nd edition" (ISBN: 9780955703522). USITT Contact Information: USITT 315 South Crouse Avenue, Suite 200 Syracuse, NY 13210-1844 USA 1-800-938-7488 or +1-315-463-6463

• Glossary of Terms 7 200 Plus Series Console 2. Glossary of Terms This section covers some of the common terms used throughout this manual. Channel Expansion Keys: Key 1-48 & Key 49-96 (Key 12-24 & Key 25- 48) Used to Page up/down for faders allowing the 24/48 console to control up to a maximum of 96 fader channels (maximum of 48 faders on the 12/24). Pressing Key 1-48 will set the fa

• Philips 64331, Operations Manual 44 CONSOLE ADVANCED OPERATION • SOFTKEY D "Run!" will start the rainbow. • To change the number of colors, the color size or the speed SOFTKEY A "Item Set" allows you to select the rele- vant field. The FX keys can then be used to enter a value of between 1 and 10 for the Color Number or size. The Speed can be set using the STEP RATE fader. • Once you have started the Rainbow running SOFTKEY D "Stop!" will halt the Rainbow. • Softkey C "Color Set" allows you to set the colors that you want to use in the Rainbow. To set the colors in Rainbow: 1) Press Softkey

• Philips 64331, Update DMX Base 59 200 Plus Series Console Note: If you want to create your own show or edit one of the ones provided with the console, you will need Strand 200 Flash Tools. You can also download Strand 200 Flash Tools from the Strand Web Site at www.strandlighting.com. You will need to load this onto a computer. Run the software. Figure 64 shows the opening screen. Figure 64: Flash File Opening Screen First, you need to load a flash file using the "OPEN FLASH" button. Several suitable Flash Files shipped with the software. These will be stored in the folder where you saved the software. You will need to open the FLASH Subfolder. Figu

• Philips 64331, 200 Plus Series Console Layout 5 200 Plus Series Console INTRODUCTION 1. 200 Plus Series Console Layout 12/24 Version Figure 2 illustrates the layout of the control features of the 200 Plus Series Console (12/24 version). Figure 2: 200 Plus Series 12/24 Console Control Features Channel Fader (1 - 24) See Detail A Blackout Button Fader Flash Button (1 - 24) Preset A Master Preset B Master Flash Level Fader Grand Master Step Rate Fader FX Keys (1 - 12) Channel Expansion Keys Single Scene Two Scene SubMas

• Philips 64331, LED Mode 37 200 Plus Series Console • To store your changes use SOFTKEY D "Enter". Note: If you wish to leave this screen without storing any changes press the MENU button. It will return you to the previous screen. LED Patch First you need to allocate each LED fixture in your rig to a preset fader on the console. The Preset A set of Faders are used in LED mode to control LED fixtures. The fader will control the intensity of the fixture and the Flash button under the fader will be used to select the fixture to allow programming of all the attributes associated wit

• Memory Playback Mode 47 200 Plus Series Console MEMORY PLAYBACK 1. Memory Playback Mode Memory playback mode is entered by pressing the MEM PLAYBACK key. You will be prompted to use SOFTKEY A "Yes" to enter this mode. If you do not wish to enter use SOFTKEY C "No". Memory Playback Mode allows you to combine Submasters with the LED and ML scenes or chases

• Philips 64331, Submaster Operation 21 200 Plus Series Console 2) Move PRESET A and PRESET B MASTERS to the bottom. 3) Press the NEXT key. It will turn blue. The flash button under Submaster 1 will flash yellow. 4) Raise the PRESET A and PRESET B MASTER faders. This will output Submaster 1 and its flash button will turn yellow. Submaster 5's flash button will now be flashing yellow. 5) Lower PRESET A and PRESET B MASTER faders to the bottom. This will output Submaster 5. 6) Continue the sequence until you have run through all of the stored submasters. 7) To exit the Sequence move PRESET A MASTER fader to the

• Operations Manual 32 CONSOLE ADVANCED OPERATION Recording Groups To record a Group follow this sequence: 1) Select the fixture you want put it into the group using the fixture select buttons. 2) Press MENU button, then Press SOFTKEY C "Record Group". 3) The Flash Buttons 1~24 (1-12 on the 12/24 version) will flash blue to indicate that no groups is

• Philips 64331, Operations Manual 10 INTRODUCTION Step 2. Connect DC connector from power supply to DC IN on console. Figure 5: 200 Plus Series Control Console Power Connection Step 3. Connect power supply to AC supply source. Step 4. Turn on console at Console On / Off Switch. Note: You must connect the console to the lighting system via DMX512 before it is capable of providing control. See "Connecting DMX512" on page 10 for more information. Connecting DMX512 The console provides two standard, female XLR 5-pin connector for connecting to DMX512 devices. DMX512 is for outputting to a universe of DMX devices for your primary output. This can include dimmers, LEDs, and moving lig

• Philips 64331, Moving Light (ML) Mode 33 200 Plus Series Console Select the Master Focus Group you want by pressing the relevant softkey. This will allow you access to the Palettes associated with that fixture. Pressing the relevant softkey will select that palette. Figure 35 shows the LCD display screen for the Master Focus Group for Gobos. Figure 35: Master Focus Group for Gobos - LCD Display Pressing the MENU button at anytime will take you back to the previous screen. Details of how to set up Focus Master Groups and the palettes within them are covered in the Appendix of how to create Moving Light and LED libraries. Shape The console comes with some built in movement effects for moving lights.

• Philips 64331, Operations Manual 58 SET UP FUNCTIONS 4) The Software will begin loading. 4. Update VGA In the future there may be updates of the VGA screens. It is on the second page of the Menu screens. You also need to insert the USB key (preloaded with the software) into the USB port on the rear panel of the console. To access VGA update: 1) Press MENU key. 2) Press SOFTKEY D "Next". 3) Press SOFTKEY B "Update VGA". 4) Use SOFTKEY D "Enter" to load the settings. 5. Update DMX Base DMX Base uses the DMX BASE output port. It is a unique feature that allows the console to run up to 12 Light shows that are independent of the output

• Philips 64331, Creating a New Fixture Library 71 200 Plus Series Console 7) Once you have set all the channels it is possible to use the Channel Traits screen to set the steps for a channel. For instance, the moving light may have a colour wheel where the DMX value for each colour is given. You can configure these as steps. 8) Once you have finished your fixture you will need to save it. It is recommended that you save the fixture to the FLIB file on the USB key. This will allow you to access it when you load the fixture library into the console. Note: For assistance, please contact your local Authorized Strand Lighting Deale

• Philips 64331, Operations Manual 42 CONSOLE ADVANCED OPERATION The bottom left of the LCD screen shows which playback you are editing, which scene you are in and the total number of scenes. In the example above we are editing Playback 1, we are in Scene 8 and there are a Total of 11 scenes. To change which Scene you are editing you will need to use SOFTKEY D "Next" to move to the next Menu screen as seen in Figure 46. Figure 46: Scene Editing Screen - LCD Display • "UP" and "Down" allow you to scroll through the available scenes. • "Delete" will delete the

• Philips 64331, Operations Manual 66 SET UP FUNCTIONS • SOFTKEY B "Fix Upload" will upload only the Fixture Information. • SOFTKEY C "SubMst Upload" will upload only the Submaster information. • SOFTKEY D "Next" will bring up further options as shown in Figure 78. Figure 78: Upload Library Options - LCD Display • SOFTKEY A "ML Upload" will upload only the ML information. • SOFTKEY B "Led Upload" will upload only the LED information. • SOFTKEY C "Patch Upload" will upload only the DMX Patch information. • SOFTK

• Philips 64331, Single Scene Operation 17 200 Plus Series Console Example: 1) Press the NEXT button to select the crossfade mode for single scene operation. 2) Make sure that the PRESET A MASTER and PRESET B MASTER faders are at the top. 3) Set the faders 1, 2, 3, 22, 23 and 24 to 100%. (as you move these faders to 100% you will see the intensities of these channels come on) 4) Press the A STORE button. It will turn red. 5) Reset the faders so 10, 11, 12, 19, 20 and 21 are at 100%. You will see no change in these channels intensities in real time. 6) Move the PRESET A MASTER and PRESET B MASTER FADERS to the bottom. 7) The A STORE button will flash. 8)

Related Products and Documents (Music Mixer):

Comparable Devices:

Similar Resources:

• Pioneer DDJ-T1 (20 pages) ORDER NO.PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JapanPIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, BelgiumPIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION201120 …

• MA lighting dot2 XL-B (45 pages) dot2 Node4 QuickMAnual XVII.04 deutsch / english Art. Nr. 1285M 00163 …

• Studio Technologies 206 (29 pages) Copyright © 2018 by Studio Technologies, Inc., all rights reservedwww.studio-tech.comUser GuideIssue 2, October 2018This User Guide is applicable for serial numbers M206-00151 to 00500 with application firmware 1.2 and later and STcontroller application version 1.07.00 and later.50646-1018, Issue 2Model 206 Announcer’s Console …

• ALLEN & HEATH DR66 (2 pages) DR66 SysNet Fitting Instructions AP3168 issue 4 ALLEN&HEATH DR66 SYSNET OPTION Fitting Instructions AP3168 Introduction Certain functions of the DR66 can be remotely controlled using a simple protocol over an RS232 serial link. This lets you use it with third party controllers such as touch screen displays and wall panels. The SysNet optio …

• Denon DNX900 - 4 Channel Professional Analog Digital DJ Mixer (63 pages) DJ MIXER / DJ-MIXER / MELANGEUR DJ / DJ MIXER / DJ MIXER / DJ MIXER / DJ MIXER / DJ 混音台DN-X500/DN-X900OPERATING INSTRUCTIONSBEDIENUNGSANLEITUNGMODE D’EMPLOIISTRUZIONI PER L’USOINSTRUCCIONES DE OPERACIONGEBRUIKSAANWIJZINGBRUKSANVISNING操作說明書 …

• protech Quicktrack MX402 (2 pages) PROTECH®WWW.PROTECHAUDIO.COM1/05Protech Audio Corporation, PO Box 597, 192 Cedar River Road, Indian Lake, New York, 12842, Voice 518-648-6410 Fax 518-648-6395All Quicktrack products use a consistent ground scheme. The MXT-1 power supply provides thenecessary ground conductor. Power supplies without the 3rd conductor ground should not be usedwith Qu …

Comments, Questions and Opinions: