Siemens SIMATIC IPC427E Operating Instructions Manual

Text of Siemens SIMATIC IPC427E User Guide:

• Table of contents SIMATIC IPC427E 8 Operating Instructions, 09/2017, A5E37454814-AB 8.7 BIOS description .................................................................................................................. 124 8.7.1 Overview ....................................................................................................................

• Siemens SIMATIC IPC427E, Index SIMATIC IPC427E 162 Operating Instructions, 09/2017, A5E37454814-AB H Hard disk drive, 107 I ICES, 96 Industrial Ethernet, 42 Initial commissioning, 47 Installation Wall, 33 Installation of operating system Windows, 84 Installing a memory module, 65 Installing language package, (See MUI) Integration Ethernet, 42 Interfaces CFast card, 113 DisplayPort, 114 USB 3.0, 115 Interference emission, 106 IT communication, 42 K Keyboard Ports, 13 L Labeling, 96 Korea, 96 License key, 83 Limitation of liability, 75 M Main memory, 1

• Siemens SIMATIC IPC427E, Technical specifications 8.7 BIOS description SIMATIC IPC427E 124 Operating Instructions, 09/2017, A5E37454814-AB 8.7 BIOS description 8.7.1 Overview Parameterize your device in the BIOS Setup. BIOS Setup program The BIOS Setup program, or BIOS Setup for short, is located, together with the setup parameters, in a FLASH block on the motherboard. Change the setup parameters of the device in the BIOS Setup, e.g. system time or boot sequence. Changing the device configuration Your device configuration is preset for operating with the included software. You should only change the default setup parameters if technical modific

• Siemens SIMATIC IPC427E, Device maintenance and repair 7.4 Installing the software SIMATIC IPC427E 82 Operating Instructions, 09/2017, A5E37454814-AB Contents of the "DocuAndDrivers" directory The supplied USB stick contains the documentation, hardware drivers and updates. In Windows, these contents are available via a menu. Restore function If you have ordered IPC427E with operating system, the supplied USB stick contains the Restore function.

• Siemens SIMATIC IPC427E, SIMATIC IPC427E Operating Instructions, 09/2017, A5E37454814-AB 143 Markings and symbols B B.1 Overview The following tables show all the symbols which may be found on your SIMATIC industrial PC, SIMATIC industrial monitor or SIMATIC Field PG in addition to the symbols which are explained in the operating instructions. The symbols on your device may vary in some details from the symbols shown in the following tables. B.2 Safety Symbol Meaning Symbol Meaning Warning, observe the supplied docu- mentation. Lock is closed Attention, radio

• SIMATIC IPC427E Operating Instructions, 09/2017, A5E37454814-AB 5 Table of contents Preface ................................................................................................................................................... 3 1 Overview...................................................................................................................

• Siemens SIMATIC IPC427E, Overview 1.2 Design of the device SIMATIC IPC427E 14 Operating Instructions, 09/2017, A5E37454814-AB 1.2.2 Status displays LED State Description PC ON/WD Off - Green BIOS ready to boot; PC running Flashing green/yellow (1 Hz) BIOS in POST, power switch on Yellow Idle state Flashing red (1 Hz) Watchdog status display: active RUN/STOP / L1 Off - Green Can be controlled by user program Yellow Can be controlled by controller program (e.g. WinAC) ERROR / L2 Off - Red - Flashing red Can be controlled by user program or controller program (e.g. WinAC) MAINT / L3 Off - Yellow - Red Can

• Siemens SIMATIC IPC427E, Markings and symbols B.5 Interfaces SIMATIC IPC427E Operating Instructions, 09/2017, A5E37454814-AB 145 B.5 Interfaces The following table shows symbols relating to ports that may be available on the device. You can find more information in the operating instructions for your device: Symbol Meaning Symbol Meaning Connection to the power supply PS/2 mouse interface Protective conductor terminal PS/2 keyboard-interface Connection for functional earthing (equipotential bonding line) Multimedia

• Siemens SIMATIC IPC427E, SIMATIC IPC427E Operating Instructions, 09/2017, A5E37454814-AB 161 Index A Abbreviations, 147, 152 Adapting Partitioning, 91 Alarms On the screen, 131 Antivirus software, 48 Approbation, 3 Australia, 96 Automatic Update, 48 B Battery monitoring, 52 BIOS Setup, 124 Exit menu, 128 Menu layout, 126 Boot sequence, 131 Buffer memory, 106 C CAN Base address register, 123 CE marking, 3, 97 Certificates, 97 Certifications and approvals, 95 CFast card Interface, 113 COA label, 26 Components sensitive to electrostatic charge, 98 Condensation, 24 Connecting Peripherals, 35 Power supply, 38 Protective conductor, 37 Connection elements, 13 Creatin

• Siemens SIMATIC IPC427E, Expanding and assigning parameters to the device 6.3 Installing and removing PCIe cards SIMATIC IPC427E 70 Operating Instructions, 09/2017, A5E37454814-AB 1. Remove the screw in the blanking plate for the slot you require and remove the blanking plate. 2. Remove the retainer. 3. Insert the expansion card into the slot as shown. Secure the expansion card with the co r- responding screw. 4. Slide the clamp in the direction indica ted. Secure the bracket with the designated screw. 5. Close the device as specified in section " Opening the device containing expansion cards (Page 63)".

• Siemens SIMATIC IPC427E, Installing and connecting the device 3.2 Installing the device SIMATIC IPC427E 30 Operating Instructions, 09/2017, A5E37454814-AB Use the following fasteners: ● Installation on a DIN rail Material Bore diameter Fastener Metal, min. 2 mm thickness 5 mm • 2 x M4 screws • 2 x M4 nuts Concrete 6 mm, 40 mm depth • 4 x dowels, ∅ 6 mm, 40 mm length • 4 x screws, ∅ 4 mm, 40 mm length Plasterboard, min. 13 mm thickness 14 mm 4 x toggle bolts, ∅ 4 mm, 50 mm length ● Wall mounting Material Bore diameter Fastener Concrete 6 mm, 40 mm depth • 4 x dowels, ∅ 6 mm, 40 mm length

• Siemens SIMATIC IPC427E, List of abbreviations SIMATIC IPC427E Operating Instructions, 09/2017, A5E37454814-AB 149 Abbreviation Term Meaning HDA High Definition Audio HDD Hard Disk Drive Hard disk drive HU Height unit HMI Human Machine Interface User interface HORM Hibernate Once - Resume Many HT Hyper-Threading HTML Hyper Text Markup Language Script language for creating Internet pages. HTTP Hypertext Transfer Protocol Protocol for data transfer on the Internet Hardware Hardware IAMT Intel Active Management Technology Technology that permits the diagnostics, man- agement and remote control of PCs

• Siemens SIMATIC IPC427E, Technical specifications 8.6 Hardware descriptions SIMATIC IPC427E 120 Operating Instructions, 09/2017, A5E37454814-AB 8.6.4 I/O Address Areas 8.6.4.1 Overview of the internal module registers The following addresses are used for the internal registers: Addresses Input/output unit I/O 062h Watchdog enable register / 066h select register (Page 120) I/O 066h Watchdog trigger register (read only, address 066h) (Page 122) I/O 404Eh - 404Fh Output register LED 1/2/3 and SF LED / RUN/STOP LED (Page 122) I/O 404Dh Battery status register (read-only) (Page 123) 8.6.4.2 Watchdog enable register / 066h select register (read/write, address 0

• Technical specifications 8.5 Technical specifications SIMATIC IPC427E Operating Instructions, 09/2017, A5E37454814-AB 109 Mechanical conditions Vibration Tested to DIN IEC 60068-2-6 - During operation with CFast card or SSD: 5 to 9 Hz: 3.5 mm 9 to 500 Hz: 9.8 m/s 2 with hard disk and wall installation: 10 to 58 Hz: 0.0375 mm 58 to 200 Hz: 4

• Siemens SIMATIC IPC427E, List of abbreviations SIMATIC IPC427E 148 Operating Instructions, 09/2017, A5E37454814-AB Abbreviation Term Meaning CSA Canadian Standards Association Canadian organization for tests and certifications according to own or binational standards (with UL / USA) standards CTS Clear To Send Clear to send DRAM Dynamic Random Access Memory DC Direct Current DC current DCD Data Carrier Detect Data carrier signal detection DMA Direct Memory Access Direct memory access DOS Disk Operating System Operating system without GUI DPP DisplayPort New powerful digital monitor port DQS Deutsch

• Siemens SIMATIC IPC427E, Device maintenance and repair 7.4 Installing the software SIMATIC IPC427E 88 Operating Instructions, 09/2017, A5E37454814-AB Procedure - Change system language 1. Connect the supplied USB stick to a free USB port of the device. 2. Restart the device and press "ESC" to access the BIOS. 3. Switch to the "Boot" menu and select the setting "USB Boot" = "Enabled". 4. Switch to the "Exit" menu and select "Exit Saving Changes". 5. Restart the device and press the "ESC" key and then enter the "Boot Manager" m

• Technical specifications 8.5 Technical specifications SIMATIC IPC427E 108 Operating Instructions, 09/2017, A5E37454814-AB 8.5.2 Ambient conditions Climatic Conditions Temperature Tested to IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14 - During operation Horizontal mounting position: Operation with hard disk: • with up to two expansion cards (max.

• Technical specifications 8.9 Functional scope in Windows SIMATIC IPC427E Operating Instructions, 09/2017, A5E37454814-AB 137 8.9 Functional scope in Windows 8.9.1 Windows Embedded Standard 7 The overview shows the most important device functions under Windows Embedded Standard 7: Function HDD / SSD version Memory card version .Net Framework Available

• Siemens SIMATIC IPC427E, Technical specifications 8.6 Hardware descriptions SIMATIC IPC427E 116 Operating Instructions, 09/2017, A5E37454814-AB 8.6.2 Internal ports 8.6.2.1 PCIe card Pin assignment for the PCIe-x4 card interface Pin no. Side B Side A Name Description Name Description 1 +12 V 12 V power PRSNT1# Hot-plug presence detect 2 +12 V 12 V power +12 V 12 V power 3 +12 V 12 V power +12 V 12 V power 4 GND Ground GND Ground 5 SMCLK SMBUS (System Manage- ment Bus) clock JTAG2 TCK (Test Clock), clock input for JTAG interface (not connected) 6 SMDAT SMBus (

• Siemens SIMATIC IPC427E, Glossary SIMATIC IPC427E Operating Instructions, 09/2017, A5E37454814-AB 159 Restart Warm restart of a computer without switching the power off (Ctrl + Alt + Del) Restore function of the USB stick The restore function is used to restore the system partition or the entire hard disk to factory state if the system has crashed. The USB stick contains all the necessary image files and is bootable. ROM Read-Only Memory ROM is a read-only memory in which every memory location can be addressed individually. The programs or data are permanently stored and are not lost in the event of a power failure. S.M.A.R.T The Self-Monitoring, Analysis and Reporting Technology

• Siemens SIMATIC IPC427E, Preface SIMATIC IPC427E 4 Operating Instructions, 09/2017, A5E37454814-AB Conventions The terms "PC" and "device" are sometimes used to refer to the SIMATIC IPC427E in this documentation. The term "Windows Embedded Standard" is used throughout to refer to "Windows Embedded Standard 7". "Windows 7" is used as an abbreviation for "Windows 7 Ultimate". Note A n ote is important information about the product, handling the product or a reference to specific sections of the documentation that require special consideration. History The following editions of t

• Siemens SIMATIC IPC427E, Technical specifications 8.9 Functional scope in Windows SIMATIC IPC427E 138 Operating Instructions, 09/2017, A5E37454814-AB Function HDD / SSD version Memory card version Telnet Server Available Available User Account Control Available Available Windows Explorer Shell Available Available Windows Firewall Available Available Windows Installer Available Available Windows Media Player Available, V12 Available, V12 Windows PowerShell 2.0 Available Available Windows Search and Natural Lan

• Siemens SIMATIC IPC427E, Technical specifications 8.8 Active Management Technology (AMT) SIMATIC IPC427E 136 Operating Instructions, 09/2017, A5E37454814-AB 8.8.5 Determining the network address To connect the AMT PC with the AMT server, the network address that uniquely localizes the AMT server on the AMT PC must be entered. If DHCP is set for the automatic assignment of the network address in "Network Setup" in the MEBx of the AMT PC, the network address is not fixed. Procedure If the AMT server uses the same network address as the operating system of the AMT PC

• Siemens SIMATIC IPC427E, Glossary SIMATIC IPC427E Operating Instructions, 09/2017, A5E37454814-AB 157 Intel VT The Intel Virtualization Technology (IVT) is the implementation of a secure closed environment for applications. Special (visualization) software an a VT-capable processor is required for its use. Interface ● Physical interconnection (cable) of hardware elements such as PLCs, PCs, programming devices, printers or monitors. ● Interface for interactive software applications. LAN L ocal A rea N etwork: LAN is a local network that consists of a group of computers and other devices that are distributed across

• Siemens SIMATIC IPC427E, Technical specifications 8.6 Hardware descriptions SIMATIC IPC427E 114 Operating Instructions, 09/2017, A5E37454814-AB 8.6.1.3 DisplayPort Pin Short name Meaning Input / output 1 ML_Lane0+ DP data 0+ Output 2 GND Ground - 3 ML_Lane0- DP data 0- Output 4 ML_Lane1+ DP data 1+ Output 5 GND Ground - 6 ML_Lane1- DP data 1- Output 7 ML_Lane2+ DP data 2+ Output 8 GND Ground - 9 ML_Lane2- DP data 2- Output 10 ML_Lane3+ DP data 3+ Output 11 GND Ground - 12 ML_Lane3- DP data 3- Output 13 CONFIG1 CAD

More Instructions:

	Siemens SIMATIC IPC427E Quick install manual 30-11-2022 2	DOWNLOAD
	Siemens SIMATIC IPC427E Installation manual 23-03-2024 9	DOWNLOAD
	Siemens SIMATIC IPC427E Operating instructions manual 28-03-2023 42	DOWNLOAD

Related Products and Documents (Industrial PC):

Comparable Devices:

Similar Resources:

• Siemens SIMATIC IPC477D (292 pages) ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ SIMATIC Industrial PC SIMATIC IPC477D, IPC477D PRO Operating Instructions 11/2016 A5E31347228-AF Preface Overv …

• SYSTEM Electronics COPILOT 15" (10 pages) Contents1. General Characteristics .................................32. Technical specications.................................33. COPILOT 15" - Description and operation...................33.1 Switch-on and Switch-off............................33.2 The LED on the front panel ..........................43.3 Touch-Screen ........................... …

• Emerson FB1100 (8 pages) FB1100/FB1200 Flow Computer HMI Module Field Replacement Guide D301816X012 November 2020 Remote Automation Solutions FB1100/FB1200 Flow Computer HMI Module Field Replacement Guide For Part Numbers (Kits):  399379-01-0  621627011-KIT  399380-01-0  621627020-KIT …

• SIGMATEK S-IPC (42 pages) S-IPC INTEL® ATOM DUAL CORE S-IPC Intel® Atom Dual Core 21.02.2014 Page 1 S-IPC with Heat Sink S-IPC with Heat Sink and Fan Unit The S-IPC is a C-DIAS industrial PC with an Intel® Atom Dual Core processor. The Speed-Step function of the Intel® Atom Dual Core processor enables passive cooling with a he …

• Onlogic IGN100 (15 pages) vvIGN100 ManualThe not so quick, quick start guide.Version 2, Published 3/7/2018IGN100 ManualUS OcePhone: +1 802 861 2300Email: [email protected] OcePhone: +31 85 2733760Email: [email protected] …

• AXIOMTEK EBOX565-500-FL SERIES (2 pages) ©Copyright 2016 Axiomtek Co., Ltd. Version A1 Nov 2016 Printed in Taiwan 9416K565000E 4 Installation of Express Mini Card Step 1 Turn off the system, and unplug the power adaptor. Step 2 Turn the system upside down to locate screws at the bottom, and then loosen all screws. Step 3 Loosen the screws to remove SSD/HDD bracket and then located the Mini PCI …

Comments, Questions and Opinions: