SnapNrack Array Skirt Installation Manual

Text of SnapNrack Array Skirt User Guide:

• SnapNrack Array Skirt, Array Skirt Installation Manual     Materials Included SnapNrack Array Skirt SnapNrack Array Skirt Frame Mount SnapNrack Array Skirt Splice SnapNrack Array Skirt End Cap Pair Hardware Description Torque Specifi cation Array Skirt Frame Mount 5 - 6 lb-ft (60 - 72 lb-in) 3 - 4 lb-ft (36 - 48 lb-in) Kyocera short side Technical Specifi cations Dimensions 162” Skirt Length Material Skirt and Splice: 6000 Series Aluminum Frame Mount: 6000 Series Aluminum, Stainless Steel Hardware End Cap: Rubber Compa

• Installation Instructions 2. With bolt backed out, rest fl at top side of skirt mount onto bottom edge of module frame. 3. Sandwich module frame with two halves of skirt mount, ensuring that shorter end of extrusion is facing up.  Required Tools Socket Wrench Torque Wrench 1/2” Socket Circular Saw or Portable Band Saw Tape Measure 1. Locate array skirt mounts using the following spa

• SnapNrack Array Skirt, 4. Finalize placement of skirt mount and torque hardware to 5 - 6 lb - ft. INSTALL NOTE: Torque to 3 - 4 lb - ft when installing on short side of Kyocera modules. 5. Determine length(s) of array skirt needed for array(s). Installation Instructions 6A 6B snapnrack.com Solar Mounting Solutions 3   6. If array skirt needs to be cut, it can be done prior to installation at ground level or on the roof after installation. 6A. If cutting skirts prior to installation, a circular saw with an appropriate metal-cutting blade is recommended. 6B. If cutting skirts after

• SnapNrack Array Skirt, SnapNrack_Array Skirt_Install Manual_1.0 © 2016 by SnapNrack Solar Mounting Solutions. All rights reserved 877-732-2860 www.snapnrack.com [email protected] snapnrack.com Solar Mounting Solutions 7. Rest array skirt on top hook of skirt mounts, then push lower hook up and lock into bottom of array skirt. Installation Instructions    4 8. If a splice is required, install by pushing it equally into lengths of array skirt and butting ends together. INSTALL NOTE: All spliced sections must follow max overhang limits noted in Step 1. 9. Push end caps onto skirt edges to complete installation.

Related Products and Documents (Solar panel):

Comparable Devices:

Similar Resources:

• LG LGXXXN1CW-A3 (14 pages) Monocrystalline Solar ModuleLGXXXN1C(W, K)-A3LGXXXN1C(W, K)-B3A minimum slope of 5 in/ft. for installation over a roof, is required to maintain the fire class ratings.The array frame shall be grounded in accordance with NEC Article 250.Installation InstructionsMFL68783801 …

• Viessmann VITOSOL300 (36 pages) VIESMANNInstallation instructionsfor heating engineersVito so l 3 00Type SP3Vacuum tube collector based on the heat pipe principleVITOSOL 3005862 790 GB 5/2005 Dispose after installation. …

• Mounting Systems Sigma Tracker (60 pages) Sigma Tracker Installation Manual Photovoltaic system Horizontal single-axis tracker as per EN 62817 Tracker name: Sigma Tracker ENGLISH Copyright © 2020 Mounting Systems GmbH - All Rights Reserved. …

• OEG 4flex 30 (92 pages) www.oeg.netInstallationshandbuchflex „Heatpipe“ RöhrenkollektorenDInstallation Manualflex evacuated “Heat Pipe” tube collectorsGBNotice d’installationCapteur à tubes flex „Heatpipe“FRInstallatiehandboekflex „Heatpipe“ buiscollectorenNL …

• Viessmann VITOCELL 100-V (16 pages) Installation and service instructionsfor contractorsVIESMANNVitocell 100-E/100-WType SVWAHeating water buffer cylinderVITOCELL 100-E/100-W6150632 GB 3/2020Please keep safe. …

• Velleman SOL10P (33 pages) SOL10P/SOL30P/SOL60P POLYCRYSTALLINE SOLAR PANEL POLYKRISTALLIJN ZONNEPANEEL PANNEAU SOLAIRE POLYCRISTALLIN PANEL SOLAR POLICRISTALINO POLYKRISTALLINES SOLARMODUL POLIKRYSTALICZNY PANEL SŁONECZNY PAINEL SOLAR POLICRISTALINO SOL10P SOL30P SOL60P USER MANUAL 3 HANDLEIDING 7 MODE D'EMPLOI 11 MANUAL DEL USUARIO 15 BEDIENUNGSANLEITUNG 19 INSTRUK …

Comments, Questions and Opinions: