Manualios.com

FTE Maximal MAX T90 HD Manual 

FTE Maximal MAX T90 HD Manual Online:

4.5, 1480 votes
FTE Maximal MAX T90 HD User Manual
FTE Maximal MAX T90 HD User Guide
FTE Maximal MAX T90 HD Online Manual

Text of FTE Maximal MAX T90 HD User Guide:

  • FTE Maximal MAX T90 HD, PAG. 17 rev 1.0 ENGLISH 3.2 RADIO CHANNEL LIST Basically, the operation of “Radio Channel List” is same as “TV Channel List”, but there is one point different: In “Radio Channel List” mode, there is no video information, so it will always display Radio’s logo in the right side preview window. (OSD 20) 3.3.DELETE ALL CHANNELS For removing all channel list, press the button [OK] (OSD 21). 1. There will show up a warning message box to inquire you whether delete all or not. 2. If you select “Yes”, all channels will be deleted. 3.

  • FTE Maximal MAX T90 HD, PAG. 8 rev 1.0 ENGLISH INDEX 1. Remote control & panel description 1.1.Front panel description.................................................................................10 1.2.Rear panel description.................................................................................10 1.3.Remote control description........................................................................11 2. Hotkey 2.1.Standby........................................................................................................12 2.2.PR+/PR-......................................................................................................12 2.3.Vol+/Vol-............................................

  • FTE Maximal MAX T90 HD, PAG. 33 rev 1.0 ENGLISH “WE , FTE MAXIMAL, DECLARE THAT THE PRODUCT MAX T90 HD IS IN CONFORMITY WITH FOLLOWING DIRECTIVES LOW VOLTAGE DIRECTIVE 2006/95/EC EMC DIRECTIVE 2004/108/EC” PART OF THE DECLARATION OF CONFORMITY CE

  • FTE Maximal MAX T90 HD, PAG. 12 rev 1.0 ENGLISH 2. HOTKEY 2.1 STANDBY 1.Press [Power] button to switch from TV mode to Standby mode 2.In Standby mode press [Power] button again to switch back to TV mode. The last active channel will be showed. 3.To switch off the STB complete press the main power button. 2.2 PR+/PR- In TV mode press [Channel Up/Channel Down] to change channel. 2.3 VOL+/VOL- In TV mode, press [Volume Up/Volume Down] to adjust volume. 2.4 NUMBER In TV mode you can enter the channel number directly with your remote control unit and confi rm the number with the OK button to change to the desired channel. 2.5 TV/RADIO In TV mode, press [TV/RADIO] to switch to Radio mode. In Radio mode pre

  • FTE Maximal MAX T90 HD, PAG. 23 rev 1.0 ENGLISH 5.6. OSD SETTING When you input to “OSD Setting” menu, you will see a screen like below (OSD 36): 1. OSD Timeout: If you confi gure this option you will be able to change OSD time of information of the channel that is tuned in every moment. 2. OSD Transparency: Besides the setting of “OSD Menu Style”, you also can set the transparency of OSD. You can press [Left/Right] key to select the values. There are 5 levels of transparency, 10%, 20%, 30%, and 40% and “NO” (means no transparency function). 3. Load Default OSD Setting: If you are not satisfy with your setting, you can move highlight to this item and press [OK]

  • FTE Maximal MAX T90 HD, PAG. 28 rev 1.0 ENGLISH In order to open the play list, please press [yellow button] and select which of the two list you wish to open (OSD 52). 1. Press [Red button] on any fi le from one list to play all the fi les contained. 2. Press [Yellow button] on any fi le from one list to delete the fi le. 3. Press [Blue button] on any fi le from one list to delete all the fi les contained. 4. Press the keys [ ] to move along the fi les and press [OK] to enter and exit of the folders or open a fi le or pla

  • FTE Maximal MAX T90 HD, PAG. 25 rev 1.0 ENGLISH 1. Upgrade mode: Select with [ ] , the mode of upgrading. 2. Update fi le: Select with [ ] the name of the fi le to be loaded. 3. Select “Start” and press [OK]. An alert message appears indicating not to take out the memory device during the loadiing process. 4. Once the fi le has been loaded, it requires the conformity to end the upgrading process, writing into the receiver the upgrading. Select “Yes” and press [OK] to upgrade the receiver. In case during the reading of the fi le, it is co

  • FTE Maximal MAX T90 HD, PAG. 30 rev 1.0 ENGLISH 8.2.4. HOW TO DELETE A RECORDING 1. To delete one or more recordings, press the [Blue] key on the recording you want to delete (if you want to delete several recordings, select them one by one). 2. A mark will appear on the name of the channel (OSD 61). 3. The marked recordings will be deleted once you exit the menu. 8.3. DISK INFORMATION In the HDD information submenu you can see the capacity of the hard disk. You also see the free space available (OSD 62). 8.4. HDD FORMAT This option will format the hard disk, deleting it completely (OSD 63) 1. In the option “Storage Partition”, please select through the keys [ ] the hard disk partition you

  • PAG. 3 rev 1.0 ENGLISH QUICK INSTALLATION GUIDE WARNING: Do not use this STB where contact with or immersion in water is a possibility. Do not use near fl ower vase, washbowls, kitchen sinks, laundry tubs, swimming pools, etc. WARNING: Do not put the candle or lamp stand on the cabinet; otherwise, there is the danger of fi re. WARNING: The unit should be connected to a power supply

  • PAG. 19 rev 1.0 ENGLISH 4.4 LCN This option makes an automatic ordering of the channels after a search. Before activating this option please verify that the function LCN (Logical channel number) is available in your region (OSD 27). INSTALLATION OSD 26 OSD 27

  • PAG. 13 rev 1.0 ENGLISH to come back to channel list. 5.With the key [Red], you will get new options that will allow you to move through the EPG on the most comfortable way, moving event by event, by sites or by days. 6.To close the EPG menu press [Exit]. 2.9. SUBTITLES In TV mode, press [Subtitle] button for activating / deactivating the channel subtitles, depending

  • FTE Maximal MAX T90 HD, PAG. 11 rev 1.0 ENGLISH 1. Standby: Switches receiver ON or in stand-by-mode. 2. Info: Shows channel information with signal bar. 3. SUB: Switches subtitle on and off. 4. Mute: Switches audio on and off. 5. |<<: Back 6. Play: Start button for recording and TimeShift. 7. <<: Backward button for recording and TimeShift. 8. >>|: Next 9. Pause: Pause button for recording and TimeShift. 10. >>: Forward button for recording and TimeShift. 11. Menú: Opens the main menu. 12. Exit: Exit menus

  • PAG. 32 rev 1.0 ENGLISH TECHNICAL SPECIFICATIONS Video Decoding Output Aspect ratio Active pixel (Scart) Active pixel (HDMI) Output connector MPEG4 AVC/H.264 HP@L4, MPEG-2 PAL 4:3 PS, 4:3 LB, 16:9, Auto 576i 576i / 576p / 720p / 1080i / 1080p HDMI / Scart / RCA Audio Decoding Output connector AAC/AC3/PCMII/Dolby Digital + HDMI / Scart/ Coaxial S

  • FRANCE 16 ZAE Les Mouilles 74570 Groisy Tel. 00 33 450 68 80 17 Fax. 00 33 450 68 84 68 [email protected] www.ftemaximal.com DEUTSCHLAND Auf der Höhe, 8 44536 Lünen Deutschland Tel. 00 49 (0) 23 18 78 5 - 01 Fax. 00 49 (0) 23 18 78 5 - 200 [email protected] www.ftemaximal.de ITALIA Via Edison, 29 42040 Calerno di Sant’Ilario d’Enza (RE) Tel. 00 39 05 22 90 97 01 Fax. 00 39 05 22 90 9

  • FTE Maximal MAX T90 HD, PAG. 16 rev 1.0 ENGLISH the channel will be skip while user change channel in the full screen. (OSD 14). 3.1.4 MOVE 1. Press number key[Yellow], next press [OK] over the channel you wish to move and a movement symbol will appear in the right side of the selected channel like above (OSD 15) 2. You can move the selected channel to the position that you want to place by press [ ] key. And press [OK] key to confi rm your decision. 3.1.5 TV CHANNEL LIST EDIT 1. Press [Blue] button to open the “Edit” window. 2. You can Delete, Sort, and Edit the channel (OSD 16). 3. Press [Exit] to leave the Channel Editing. The system will ask you to confi rm the saving

  • FTE Maximal MAX T90 HD, PAG. 14 rev 1.0 ENGLISH of the recording. If you press the Key [Exit], the recording will continue. 3.Press the key [Stop] again to end the recording manually, if you want to end the recording before the programmed length. 2.18. TIMESHIFT In order to activate this Timeshif option, please access to DVR confi guration menu. From the moment the user access to the channel, the receiver keeps all the channel information in a buffer (OSD 8). All the information is on the hard disk, for this reason it is possible to play, pause, fast forward and reward. 1. Pressing the button [<<

  • FTE Maximal MAX T90 HD, PAG. 6 rev 1.0 ENGLISH TV Channel List: This option shows the list of TV stored channels. Radio Channel List: This option shows the list of Radio stored channels. Delete All Channels: This option deletes all TV and Radio stored channels. Auto Scan: This option make a full scan of all TV and Radio channels received. Channel Scan: This option make a compete scan of only one Multiplex. Tunner Setting: This option allows turns on or off 5V feeding throughcoaxial cable. LCN: This option can control the channel whether sort by the information in the streams. QUICK INSTALLATION GUIDE

  • FTE Maximal MAX T90 HD, PAG. 5 rev 1.0 ENGLISH STEP 3: BASIC CONFIGURATION OF THE RECEIVER The receiver includes an installation assistant that will help you to setup the different parameters. When the receiver is turned on at fi rst time (using the button at the rear panel of the receiver), the next menu is shown on the TV: In order to move through the different options of this menu, please use the keysof the remote control. - Region: select your country using keys. - OSD Language: select the language of the menu and other information of the receiver. To choose between the different languages, use keys of the remote control

  • FTE Maximal MAX T90 HD, PAG. 21 rev 1.0 ENGLISH select from 576i / 576p / 720p / 1080i/ 1080p in HDMI mode and 576i in RGB mode. Press [ ] to select the desired mode. 2. Aspect Mode is used for switching the screen aspect ratio mode. Now we provide below options: 4:3 PS / 4:3 LB / 16:9 / AUTO. You can press [ ] key to select each mode circularly. 3. In video output you can choose, by the means of [ ] keys, the video output mode: RGB / HDMI. We recommend selecting YUV mode when the connection is made by HDMI, if on the contrary it is made by scart cable, we recommend selecting RGB mode. 4. Digital Audio Out: It will allow you to select the

  • FTE Maximal MAX T90 HD, PAG. 10 rev 1.0 ENGLISH 1. PANEL & REMOTE CONTROL DESCRIPTION 1.1. FRONT PANEL DESCRIPTION REMOTE CONTROL & PANEL DESCRIPTION 1. ANT IN: Input of the digital tuner. 2. LOOP: Ouput for cascading to others devices. 3. COAXIAL S/PDIF: Coaxial output for digital audio (AC3) 4. HDMI: HDMI output for connecting to a TV 5. TV: Output SCART for the connection to a TV set. 6. VIDEO: Video output for external monitor, TFT or video beamer. 7. AUDIO: Audio output for home audio systems. 8. AC IN: Mains input cable. 1.2. REAR PANEL DESCRIPTION 4 321 1. USB: USB Connector 2.0 2.Remote Senso

  • FTE Maximal MAX T90 HD, PAG. 18 rev 1.0 ENGLISH 4.INSTALLATION Press [Menu] in the TV mode to enter the main menu (OSD 22). 1. Press [ ] to select the Installation item. 2. Press [OK] to enter the selected item. In the Installation menu (OSD 23): 3. Press [ ] to select the wanted menu item. 4. Press [OK] to enter the selected item among. - Auto Scan - Channel Scan - Aerial adjustment - LCN 4.1.AUTO SCAN When you enter to “Auto Scan” menu, there will display the screen like below (OSD 24): 1. Firstly please select the country in System Setup Menu / Local Time Settings / Region 2. In “FTA Only” item, pr

  • FTE Maximal MAX T90 HD, PAG. 20 rev 1.0 ENGLISH 5. SYSTEM SETUP Press [Menu] in the TV mode to enter the main menu . 1. Press [ ] to select the System Setup item. 2. Press [OK] to enter the selected item. In the System Setup menu (OSD 28): 3. Press [ ] to select the wanted menu item. 4. Press [OK] to enter the selected item among (OSD 29). - OSD Language - TV System - Local Time Setting - Timer Setting - Parental Lock - OSD setting - Favorite - Auto Standby 5.1 OSD LANGUAGE When you enter to “Language” menu, you will see the screen like below (OSD 30): 1.OSD Language: press [ ] key to select languages, the selections of languages include:

  • FTE Maximal MAX T90 HD, PAG. 15 rev 1.0 ENGLISH 3.CHANNEL Press [Menu] in the TV mode to enter the main menu (OSD 9). 1. Press [ ] to select the Channel item. 2. Press [OK] to enter the selected item. In the Channel menu (OSD 10): 3. Press [ ] to select the wanted menu item. 4. Press [OK] to enter the selected item among. - TV Channel List - Radio Channel List - Delete all channels 3.1 TV CHANNEL LIST When you enter to “Channel List” menu, there will display the screen like below (OSD 11). 1.You can move highlight by press [ ] key to preview the current highlighted program in the right side preview window. 2.You can use [ ] key to

Related Products and Documents (TV Receiver):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Security Tronix ST-D600VP3.6-B-W Installation manual security-tronix/st-d600vp36-b-w-95M.pdf 06 Aug 2023 4
2 Marvel 66SWCE-BB-G Datasheet marvel/66swce-bb-g-C51.pdf 28 Nov 2022 1
3 Dell PowerConnect W AP 93H Installation manual dell/powerconnect-w-ap-93h-2H2.pdf 25 Feb 2024 2 0.74 Mb
4 3Com 2928 - Baseline Plus Switch PWR Datasheet 3com/2928-baseline-plus-switch-pwr-S53.pdf 31 Mar 2023 3 0.12 Mb
5 Satec PM130 PLUS Installation and operation manual satec/pm130-plus-2ET.pdf 26 Jan 2024 161
6 Benchmark RBS 20 E Installation manual benchmark/rbs-20-e-5MC.pdf 14 Feb 2023 24

Similar Resources:

  • MSI

    Digital@nywhere-ATSC

    (24 pages)
    1 Digital@nywhere-ATSC Installation Manual Contents V1.10 Chapter 1: Digital@nywhere-ATSC Hardware Installation ..............................................................................2 1.1 Package Contents.................................................................................................................................2 1.2 System Re …
  • NPG

    SL-AT12PR

    (4 pages)
    To install the device you will have to follow 4 simple steps:Step 1. Connect your SL-AT12PR device to one HDMI port on your TV orusing the HDMI extension cable included in the original box.Step 2. Connect the micro USB cable to your device and an USB port onyour television set.Step 3. Select on your TV the HDMI input to which the device is connec-ted.Note th …
  • Bush

    BFSAT01SD

    (12 pages)
    BFSAT01SDdigital boxInstruction ManualIMPORTANT: Please read all instructions carefully before use and keep for future reference.BFSAT01SD IB-Rev4-090908.indd 1 09/09/2008 14:57:00 …
  • Elgato

    Eye TV Hybrid

    (2 pages)
    Quick Start GuideConnect DVB-T antennahybridWhat’s in the boxConnect active antennahybridhybridhybrid Stick Antenna Remote USB Cable Video Cable CD Activation KeyConnecting a rod antennaPull off the grey protective cap and connect EyeTV Hybrid to a free USB 2.0 port on your computer. You can connect the stick directly or via the supplied USB extensi …
  • Entone

    Kamai 400

    (2 pages)
    Kamai™ 400/450 Hybrid Media PlayerKamai is a next-generation hybrid media player that offers a cost-effective way to deliver advanced hybrid TV and streaming services such as over-the-top (OTT) video and Web media services. It also enables personal media sharing throughout a subscriber’s home via a wired or wireless network connection. Compact and stylis …
  • Entone

    Hydra HD B-Series

    (15 pages)
    COPYRIGHT  2008 ENTONE, INC. ALL RIGHTS RESERVED. Hydra HD Quick Reference (P/N 95-82xxxx-xx) 1 Hydra HD Quick Reference Guide 1. Welcome! Thank you for using Entone’s Hydra High Definition Multi-Television Video Gateway. This quick reference gives quick instruction for setting up and using Hydra. For detailed setup and usage instruction, …

Comments, Questions and Opinions: