Manualios.com

Fuji Xerox DocuCentre-V C2265 Administrator's Manual

  • DocuCentre-V C2265 All in One Printer
  • madPABzgrtNsM
  • Administrator's Manual
  • PDF / Adobe Acrobat Reader
  • 771

Fuji Xerox DocuCentre-V C2265 Manual Online:

4.15, 1188 votes
Fuji Xerox DocuCentre-V C2265 User Manual
Fuji Xerox DocuCentre-V C2265 User Guide
Fuji Xerox DocuCentre-V C2265 Online Manual

Text of Fuji Xerox DocuCentre-V C2265 User Guide:

  • Fuji Xerox DocuCentre-V C2265, Appendix 692 Appendix 16 Alphanumeric fonts 112 Sets the font for single-byte characters. Reference z For more information on fonts, refer to "Internal Fonts" (P.648). [0] (Default) : Stroke [1] : Roman [2] : Sans serif Position adjustment 113 (Vertical position adjustment) Adjusts the hard clip area vertically or horizontally. You can set from -250 mm to +250 mm in 1 mm increments. [0] (Default) : Does not move the hard clip area. [1] - [250] : -250 to -1 mm [251] - [500] : +1 to +250 mm Important z Data outside the printable area is not printed regardless of the ad

  • Fuji Xerox DocuCentre-V C2265, Machine Information 129 Machine Status 4 3 Select [Confirm]. The current setting value appears. 4 Select [Change Value]. 5 Enter [New Value] with the numeric keypad. 6 Select [Save]. Store/Delete Programming For ESC/P-K and HP-GL/2 emulations, you can register settings in memory. You can register up to 20 print modes for ESC/P-K and HP-GL/2 emulations. 1 Select [Store/Delete Programming]. 2 Select [Store Current Selections] or [Delete]. Store Current Selections Stores the current selections. If you select a number already used, its settings will be overwritten with the new settings. The overwritten settings cannot be restored. Delete Select

  • Fuji Xerox DocuCentre-V C2265, Installation When Using TCP/IP (LPD/Port 9100) 343 Printer Environment Settings 7 CentreWare Internet Services Setting Items You can configure the following setting items using CentreWare Internet Services: Reference z For details on the setting items, click [Help] at the upper right corner of the CentreWare Internet Services screen to see help. Important z To display the online help for CentreWare Internet Services, users need to have the environment to connect to the internet. The communication fee shall be borne by you. Reference z For information on how to start Cent

  • Paper Jams 621 Problem Solving 15 Paper Jams in Finisher-B1 The following describes how to clear paper jams occurring in the Finisher-B1 (optional). Paper Jams under the Finisher Top Cover 1 Push up the lever on the finisher top cover. 2 The finisher top cover opens. 3 Remove the jammed paper. Note z If the paper is torn, make sure no piece of paper remains inside the

  • Fuji Xerox DocuCentre-V C2265, Encryption and Digital Signature Settings 410 Encryption and Digital Signature Settings 13 Configuration of HTTP Communications Encryption This section describes the settings to encrypt HTTP communications. "Installation Overview" (P.410) "Step1 Configuration on the Machine" (P.410) "Step2 Configuration on the Computer" (P.412) Installation Overview To encrypt HTTP communications, configure the machine and your computer as follows: Configuration on the Machine Configure a certificate on the machine. No certificate is registered on the machine by factory default. Configure certificates for an SSL server as needed. z Confi

  • Fuji Xerox DocuCentre-V C2265, Trouble during Scanning 481 Problem Solving 15 Trouble during Scanning This section describes how to resolve scan problems. Note z The Scan features are not available for some models. An optional component is required. For more information, contact our Customer Support Center. Unable to Scan with the Machine If you cannot scan with the machine, identify the symptom in the following table to perform the remedy. Symptom Cause Remedy The document is not correctly fed from the document feeder. The document is too small. The minimum size of the document that can be loaded on the document feeder is 125 x 85 mm (Standard size: A5, A5 ). Ref

  • Fuji Xerox DocuCentre-V C2265, Tools 288 Tools 5 E-mail Notification You can receive an e-mail notification when a file is saved in a folder or a job flow ends.  Name/E-mail Address Set the recipient of the e-mail notification.  Message Enter a message that is displayed in the e-mail message body.  When to Notify Select the e-mail notification timing from [When file is stored] and [At the end of Job Flow].  Delete Recipient Deletes all information for the selected recipient.  Edit Allows you to check or change the recipient selected. Reference z For more information, refer to "Create Fax Group Recipients" (P.299).  Clos

  • Fuji Xerox DocuCentre-V C2265, Problem Solving 458 Problem Solving 15 Image Quality Trouble If the image quality of printed documents is poor, identify the symptom in the following table to perform the remedy. If image quality does not improve even after performing the remedy, contact our Customer Support Center. Symptom Cause Remedy The copy is dirty. Is the document glass or the document cover dirty? Clean the document glass and the document cover. Reference z Refer to "Cleaning the Document Cover and Document Glass" (P.99). Is the document a transparent type such as a transparency film? If the document is transparent, dirt on the document cover will be c

  • Fuji Xerox DocuCentre-V C2265, Tools 272 Tools 5  Power Off Deletes Jobs Allows you to set whether or not to delete print files stored when the machine is turned off and then on. When you select [Yes], all stored print files are deleted. When you select [No], the machine deletes only the expired stored print files. Important z If you select [Yes], all print files stored will be deleted regardless of the setting in [Options]. Display Details of Stored Print Job List Set whether or not to display detailed information such as output color and 2 sided i

  • Fuji Xerox DocuCentre-V C2265, Machine Trouble 455 Problem Solving 15 Unable to copy with the specified size. Are the document guides on the document feeder set in the correct positions? Adjust the document guide positions. Reference z Refer to "Copy" > "Copying Procedure" in the User Guide. Is the document folded? Unfold and correctly load the document. Reference z Refer to "Copy" > "Copying Procedure" in the User Guide. Is the document a non- standard size? Specify the document size. Reference z Refer to "Copy" > "Copying Procedure&q

  • Fuji Xerox DocuCentre-V C2265, Problem Solving 456 Problem Solving 15 Paper is often jammed or wrinkled. Are the paper guides set correctly? Load the paper correctly, and align thepaper guides to the paper. Reference z Refer to "Loading Paper" (P.66)or "Changing the Paper Size" (P.70). Is the image nearly the same size as the paper? Increase the edge erase widths. Is the paper finely cut out? Some types of paper may not be cut out finely. Load the paper after fanning it well. A document is not fed into the document feeder. Is the document small? The minimum size of the document that can be loaded on the document feeder is 1

  • Fuji Xerox DocuCentre-V C2265, Table of Contents 9 Preparations .................................................................................................................................401 System Requirements for the Machine ................................................................................................................401 Installation Procedure ..............................................................................................................402 Installation Overview ...................................................................................................................................................402 Step 1 Fax Settings ......................

  • Fuji Xerox DocuCentre-V C2265, Printer Environment Settings 346 Printer Environment Settings 7 2) Select [Port Settings]. 3) Select [IPP], and then select [Change Settings]. 4) Select [Port Status], and then select [Change Settings]. 5) Select [Enabled], and then select [Save]. 6) Select [Close] repeatedly until the [Tools] screen is displayed. 3 Set an IP address and the other addresses. Skip this step if an IP address is already set. If DHCP or BOOTP is available in your environment, configure the method for obtaining the address. The configuration of an IP address, a subnet mask, and a gateway address is not required. Reference z For informat

  • Fuji Xerox DocuCentre-V C2265, Replacing Consumables 83 Maintenance 3 * : The remaining page yield for copy/print jobs is applicable when A4 paper LEF()is used. The value is an estimate and varies depending on the conditions such as the content printed, dot coverage (area coverage), paper size, paper type, copy/print density, output image type, and the machine operating environment. When replacing the waste toner container, clean the LED printheads located behind the waste toner container by using the cleaning bar supplied

  • Paper Types 61 Paper and Other Media 2 Xerox Digital Color Matte Labels - Labels - z Labels once fed to the machine cannot be used. z Loading from Trays 1 to 4 is recommended. z Paper may be jammed in a humid condition. Fan the paper before loading. If paper jams still occur, feed one sheet at a time. Xerox Laser Transp. - Removabl e Stripe - Labels - - Phase

  • Fuji Xerox DocuCentre-V C2265, Problem Solving 568 Problem Solving 15 027-504 [Cause] An SMTP server error occurred. [Remedy] Execute the operation again. If the error still is not resolved, contact our Customer Support Center. 027-513 [Cause] The machine failed to transfer data using SMB of the Scan to PC service because access to the SMB server was not permitted. [Remedy] Consult your system administrator for settings. 027-514 [Cause] The machine failed to transfer data using SMB of the Scan to PC service because an error has been occurred between the SMB server and the DNS server. [Remedy] Check the following conditions: z The SMB server is connected to the DNS server. z The SMB server name is

  • System Settings Procedure 139 Tools 5 1 Enter the system administrator's user ID with the numeric keypad or the keyboard displayed on the screen, and select [Enter]. When a passcode is required, select [Next] and enter the system administrator's passcode, and then select [Enter]. Note z The default user ID is "11111". z The default passcode is "x-admin". z

  • Fuji Xerox DocuCentre-V C2265, Problem Solving 532 Problem Solving 15 018-564 [Cause] DNS resolution for the specified hostname failed. [Remedy] Check the followings: z The destination HTTP server for the scanned document is registered on the DNS server. z The machine is connected to the DNS server. z The address of the DNS server is set on the machine. 018-565 [Cause] DNS resolution for the proxy server name set on the machine failed. [Remedy] Check the followings: z The proxy server name set on the machine is registered on the DNS server. z The machine is connected to the DNS server. z The address of

  • Fuji Xerox DocuCentre-V C2265, Paper and Other Media 54 Paper and Other Media 2 Xerox Digital Colour Impressio ns 250 Extra Heavyweight Extra Heavyweight (X-HW) A - Xerox Digital Colour Colotech+ 120 Heavyweight Heavyweight (HW) A - Xerox Digital Colour Colotech+ 160 Heavyweight Heavyweight (HW) A - Xerox Digital Colour Colotech+ 200 Extra Heavyweight Extra Heavyweight (X-HW) A - Xerox Digital Colour Colotech+ 220 Extra Heavyweight Extra Heavyweight (X-HW) A - Xerox Digital Colour Colotech+ 250 Extra Heavyweight

  • Fuji Xerox DocuCentre-V C2265, Machine Status 126 Machine Status 4 (SIP), or the Internet Fax transmission succeeds, this report is also printed. You can check a thumbnail of the scanned data and its transmission result. You can set not to print out the Transmission Report - Undelivered automatically. Reference z For information on setting whether to print the report for e-mails automatically, refer to "Scan File Transfer Report" (P.165). z For information on setting whether to print the report for faxes automatically, refer to "Transmission Report - Job Undelivered" (P.165). Folder Report You can confirm a document that is stored in a fol

  • Fuji Xerox DocuCentre-V C2265, Fax Service Settings 257 Tools 5 4 Enter the folder number (three digits) where you want to store the faxes with the numeric keypad. 5 Select [Save]. Output Destination Setup In [Output Destination Setup], you can set the output destination for each receiving line. Note z This feature may not be available depending on the model or your machine configuration. For more information, contact our Customer Support Center. z The displayed items may vary depending on the options installed.  Fax Receiv

  • Appendix 690 Appendix 16 HP-GL/2 Emulation Settings The following table shows the emulation parameters and their values for HP-GL/2 emulation. HP-GL/2 Settings List Items that can be set using the HP-GL/2 mode menu are explained in two groups: basic settings and extended settings. Basic Settings Parameter Item No. Value Document size 101 Sets the document size created by a c

  • Fuji Xerox DocuCentre-V C2265, Before Using the Machine 36 Before Using the Machine 1 5 Select [Services Home], and then select [Change Settings]. Note z Select[ ]to display the previous screen or[ ]to display the next screen. 6 Select the position where you want to assign a service. Note z Select[ ]to display the previous screen or[ ]to display the next screen. z The layout of the buttons in this screen corresponds to the layout of those on the Services Home screen. 7 Select a service you want to display on the Services Home screen. Note z Select[ ]to display the previous screen or[ ]to display the next screen. z You cannot assign the same feature to more than one button. 8 Select [Save]. 9 Select

  • Tools 196 Tools 5 LPD  Port Status Select [Enabled] to use LPD.  Port Number Enter a port number for LPD from 1 to 65535. The default value is 515. Important z Do not use the numbers assigned to the other ports.  Maximum Number of Sessions Enter the maximum number of client sessions using LPD. You can enter a number from 1 to 10 in 1 session increments. The default value is 5.

Related Products and Documents (All in One Printer):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Extron electronics Active Audio AAP Specification sheet extron-electronics/active-audio-aap-644.pdf 28 Jun 2022 1
2 Philips MCM148/96 Quick start manual philips/mcm148-96-UN6.pdf 06 Jun 2023 4 1.62 Mb
3 Ormed ATRTOMOT-K1 Service manual ormed/atrtomot-k1-5U7.pdf 21 Nov 2022 17
4 Taylor C706 Operator's manual taylor/c706-924.pdf 18 Dec 2023 44
5 RSQ SG-405 Owner's manual rsq/sg-405-5Y4.pdf 12 May 2023 15 0.33 Mb
6 Teac GR-10i Service manual teac/gr-10i-TC1.pdf 18 Jul 2022 19

Similar Resources:

  • HP

    Color LaserJet Pro M252

    (8 pages)
    1עברית ................ 4English .............. 124. Initial setup on the control panel (M252dw model only)5. Select a connection method and prepare for software installation Windows1. For Windows, except Windows 8, 8.1, or RT, do not connect the USB cable before installing the software. If the cable is already connected, disconnect it before contin …
  • Canon

    PIXMA MP600

    (2 pages)
    Start HereEasy Setup InstructionsTurn the Easy-Scroll Wheel left or right to easily select a menu or a setting item. For details, refer to “Basic Operation for the Operation Panel” in the Quick Start Guide.* You can also use the {, }, [, or ] button to select.CassetteEasy-Scroll WheelFor information on how to load paper in the Cassette, refer to “Loadi …
  • HP

    OfficeJet K60

    (4 pages)
    August 2000The HP OfficeJet K60 and HP OfficeJet K80 arecompact all-in-one products that provide presentation-qualityprinting, faxing, scanning and copying for your home office.PRINT• Up to 2400 x 1200 dpi color1• HP's enhanced PhotoREt color layering technology• Up to 600 x 600 dpi black with ResolutionEnhancement technology (REt)Built-in FontsCo …
  • Sharp

    AR-M160

    (112 pages)
    This document has been published to be used forafter sales service only.The contents are subject to change without notice.Parts marked with “ “ are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.SHARP CORPORATIONDIGITAL COPIERAR-M160MODELAR-M205CODE …
  • Sharp

    B750 - UX B/W Inkjet

    (80 pages)
    Customer Support LineIMPORTANTPLEASE KEEP THE EXTERNAL & INTERNAL PACKAGING SAFE. PLEASE DO NOT THROW IT AWAY.IN THE UNLIKELY EVENT OF A HARDWARE FAILURE, OUR REPAIR CENTRE WILL ASK YOU TO PUT YOUR SHARP FACSIMILE IN THIS BOX. THANK YOU FOR YOUR ASSISTANCE. 44 (0)161 688 1549FACSIMILEFACSIMILEMODELOPERATION MANUALUX-B750_TINSE4593UX-B750UX-B750 …
  • Ricoh

    Aficio SP 5200S

    (208 pages)
    Advanced CopyingDocument Server1234Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety Information in "Manuals and Safety Information for This Machine" before using the machine.Copier and Document Server FeaturesAppendix56Placing OriginalsBasic CopyingOp …

All in One Printer Instructions:

Comments, Questions and Opinions: