Epson Mounting bracket Installation Manual

Text of Epson Mounting bracket User Guide:

• 2 Safety Instructions For your safety, read all the instructions in this guide before using the mounting bracket. Incorrect handling that ignores instructions in this guide could damage the mounting bracket or could result in personal injury or property damage. Keep this installation guide at hand for future reference. Read the User's Guide and Safety Instructions for your p

• Epson Mounting bracket, 3 English Place to Install the Mounting Bracket Carry out the power supply wiring work for the installation location of the mounting bracket in advance. Install the projector away from other electric devices such as fluorescent lights or air conditioners. Some kinds of fluorescent lights could interfere with the remote control of the projector. It is recommended to keep connection cable length less than 20 meters to reduce external noise. Install the mounting bracket in a place free from excessive dust and humidity to prevent the lens or optical components from becoming dirty. About This Installation Guide This guide describes how to mount the s

• Epson Mounting bracket, 4 1 Package Contents s Page 5 2 Specifications s Page 6 3 Connecting Devices s Page 7 4 Projection Distance Table s Page 8 5 Installation Procedure s Page 10 (1) Install the wall plate on the wall (2) Determine the projection distance and pull out the slider (3) Attach the mounting bracket to the wall plate (4) Secure the projector to the mounting bracket (5) Connect the power cable and other cables to the projector 6 Adjusting the Projection Screen s Page 14 (1) Turn on the projector (2) Change the aspect ratio (3) Display the test pattern (4) Adjust

• Epson Mounting bracket, 5 English 1. Package Contents Use the bolts supplied with the mounting bracket to install it, as directed in this guide. Do not substitute these bolts with any other types. Use commercially available M8 x 50 mm anchors (at least 3) or 8 x 80 mm lag bolts (at least 3) to attach the wall plate to the wall. Gather the tools and parts you need before you begin installation. Shape Name Quantity Application M8 x 35 mm hexagon socket head cap bolt without washer 2 For installing/adjusting mounting bracket M8 x 15 mm hexagon socket head cap bolt with washer 2 For installing mounting b

• 6 2. Specifications Wall plate Mounting bracket adjustment range Item Specification Remark Reference Page Mounting bracket mass Approx. 6.3 kg (13.89 lb.) Wall plate (2.2 kg [4.85 lb.]) Covers and cap (0.47 kg [1.04 lb.]) Forward/backward slide adjustment range 0 to 300 mm (11.81 in.) Refer to the figure below Vertical slide adjustment range ± 4 ° Minimum: 28 mm (1.10 in.

• Epson Mounting bracket, 7 English 3.Connecting Devices Prepare a power cable, computer cable, USB cable, and so on at the location where the mounting bracket is to be installed. Prepare all necessary cables for devices, such as a document camera or microphone, that you will connect to the projector. External speakers LAN device Microphone USB cable (for Easy Interactive Function) Document camera Computer Computer cable (for computer video output) Connection Example Dedicated USB cable (supplied with document camera) Audio cable (commercially available product) LAN cable

• Epson Mounting bracket, 8 4. Projection Distance Table Refer to the table below and install the mounting bracket and projector to project images at an appropriate size on the projection surface. The values are only rough estimates. The recommended range for the projection distance (a) is 7 to 37 cm (2.76 to 14.57 in.). Wall plate Projection surface Offset value for the position of the center of the screen and the center of the wall plate Distance from wall of projection surface 65 mm (2.55 in.) 240 mm (9.44 in.) S 4 XGA WXGA 3 16 9

• Epson Mounting bracket, 9 English Unit: mm (in.) Aspect Ratio S a b h Interactive Whiteboard Screen Size Projection Distance Minimum (Wide) Distance Between Projection Surface and Wall Plate Height of Projection Surface 4:3 63" 71 (2.80) 175 (6.89) 960 (37.80) Hitachi StarBoard FX-63 64" 79 (3.11) 177 (6.97) 975 (38.39) SMART Board 660 Promethean ActivBoard 164 70" 125 (4.92) 191 (7.52) 1067 (42.01) 77" 178 (7.00) 207 (8.15) 1173 (46.18) Hitachi Cambridge Board 77 Hitachi StarBoard FX-77 SMART Board 680 77.5" 182 (7.16) 208 (8.19) 1181 (46.50) RM ClassBoar

• Epson Mounting bracket, 10 5. Installation Procedure Make sure to follow the steps below to install the mounting bracket. If you ignore these steps, the mounting bracket could fall and cause personal injury or property damage. A Install the wall plate on the wall (1) Determine the template sheet position. • From the projection distance table, confirm the screen size (S) and the distance between the projection surface and wall plate (b). • Align the CTR line (vertical) of the template sheet with the center line (vertical) of the projection surface. Confirm where the beams are within the wall, and shift the position left or right as necessary. (The position can be shifted horizontally left or right fr

• Epson Mounting bracket, 11 English (3) Make mounting holes in the wall in the required locations. The wall plate needs to be secured by commercially available anchors or lag bolts in the following places. It is recommended that the wall plate be secured in at least three places. • If securing the wall plate in four places, make the holes indicated by A or B in the figure. • If securing the wall plate in three places, make the holes indicated by C in the figure. (4) Remove the template sheet. (5) Mount the wall plate on the wall. B D

• Epson Mounting bracket, 12 C Attach the mounting bracket to the wall plate (1) Hang the mounting bracket hook onto the wall plate bar (A). (2) Lift up the mounting bracket and pass the cables through it ( B). (3) Tighten the two M8 x 15 mm hexagon socket head cap bolts and two M8 x 35 mm hexagon socket head cap bolts supplied with the mounting bracket so that the mounting bracket becomes horizontal ( C). Use the two M8 x 35 mm hexagon socket head cap bolts to adjust the vertical slide. s p. 17 D Secure the projector to the mounting bracket (1) Loosen

• Epson Mounting bracket, 13 English (2) Insert the slide plate into the mounting bracket from the interface side of the projector (A). Align the marks on the projector and the mounting bracket ( B). (3) Tighten the two M5 x 12 mm hexagon socket head cap bolts ( C). E Connect the power cable and other cables to the projector Connect any necessary cables such as the power cable, computer cable, and USB cable to the projector. Projector interface side M5 x 12 mm hexagon socket head cap bolts (2) Marks Bolt positions Side plate If you use adhesives to prevent the screws from loosening or things such as lubricants or oils

• Epson Mounting bracket, 14 6. Adjusting the Projection Screen To ensure maximum projection screen quality, follow the steps below to adjust the projection screen. A Turn on the projector B Change the aspect ratio Each time you press the [Aspect] button on the remote control, the aspect name is displayed on the screen and the aspect changes. Change the setting according to the signal for the connected equipment. Alternatively, set the aspect ratio from the [Signal] menu - [Aspect] from the Configuration menu. s User’s Guide for the projector: [Configuration] menu - [Signal] menu C Display the

• 15 English D Adjust the focus (1) Move the air filter cover lever to open the air filter cover. (2) Use the focus lever to adjust the focus. (3) After you finish making the adjustment, close the air filter cover. E Use the top adjustment dial to adjust the vertical tilt (1) Loosen the screw that corresponds to the top adjustment dial (A). (2) Turn the adjustment dial

• Epson Mounting bracket, 16 F Use the right adjustment dial to adjust the horizontal rotation (1) Loosen the two screws that correspond to the right adjustment dial (A). (2) Turn the adjustment dial to adjust the horizontal rotation ( B). (3) After you finish making all of the adjustments in steps E to I, tighten the two screws you loosened in A. G Use the left adjustment dial to adjust the horizontal roll (1) Loosen the screw that corresponds to the left adjustment dial (A). (2) Turn the adjustment dial to adjust the horizontal roll ( B). (3) After you finish making all of the adjustments in steps E to I, tighten the screw you loosened in A.

• Epson Mounting bracket, 17 English H Adjust the vertical slide Adjust the vertical slide with the two M8 x 35 mm hexagon socket head cap bolts at the bottom of the mounting bracket. Tightening the bolts raises the mounting bracket, and loosening them lowers it. The projection screen is raised or lowered accordingly. I Adjust the forward/backward slide Loosen the four screws and adjust the slider of the mounting bracket. After you finish making all of the adjustments in steps E to I, tighten the screws. J Turn off the display of the test pattern Press the [Esc] button on the remote control or control panel to turn off the test pattern. M8 x 35 mm hexagon socket

• 18 7. Attaching the Covers A Attach the wall plate cover and end cap (1) Secure the wall plate cover with the two M4 x 12 mm hexagon socket head cap bolts (A). (2) Place the end cap with the concave portion facing up ( B). B Attach the cable cover to the projector Attach the cable cover and tighten the two screws to secure the cable cover. q Depending on how

• Epson Mounting bracket, 19 English 8. Appendix Using the Easy Interactive Function After you install an Easy Interactive Function compatible model (EB-460i/450Wi), you need to install the Easy Interactive Driver and perform calibration (to align the positions of the cursor and Easy Interactive Pen). For details, refer to the supplied Quick Start Guide or the User’s Guide on the Document CD-ROM. Attaching a Security Cable If the projector is to be installed in a room where it will be left unattended, you can use a commercially available theft-prevention wire lock to secure the projector to a post or other object to prevent so

Related Products and Documents (Racks & Stands):

Comparable Devices:

Similar Resources:

• MSW DS-200 (2 pages) 14171 07/15DS-200 UNIVERSAL DISPLAY STAND INSTRUCTIONS6400 WEST 105TH STREET // BLOOMINGTON, MN 55438 // 1-855-883-6563 // WWW.MSWBIKE.COMThank you for your purchase! At MSW® we believe that having essential accessories makes a good ride great—whether on the showroom floor, your basement shop, or in your garage, we hope this Universal Display Stand keeps …

• Cisco Router Cisco 3600 (58 pages) CHAPTER5-1Cisco 3600 Series Hardware Installation GuideOL-2056-025Installing Memory in the RouterThis chapter describes procedures for adding and replacing memory in Cisco 3600 series routers, andcontains the following sections:• Accessing the Mainboard, page 5-2• Replacing DRAM and SDRAM, page 5-6• Replacing Flash Memory SIMMs, page 5-19• Replacing …

• Graco 24Y479 (2 pages) 3A3181AENInstructionsForklift Stabilization Kit forToughTek™ F680e PumpTo stabilize the ToughTek F680e Pump while lifting with a forklift.For professional use only.Kit 24Y479Important Safety InstructionsRead all instructions in this manual and all warnings and instructions in the ToughTekTM F680e Operation manual 3A3110. Save all instructions. WL� …

• Toa HY-BC1 (2 pages) • Leave the installation to your TOA dealer because the installation requires expert knowledge. Improperinstallation may cause the speaker to fall, resulting in personal injury and/or property damage. • Install the mounting hardware in a location that can structurally support the weight of the mounting hardwareand the speaker. Doing otherwis …

• AG Neovo WMK-03 (2 pages) Wall mount bracket --- 1 pcs Display bracket --- 1 pcs Carriage Bolt--- 4 pcsPlastic PlugPlastic Washer Nut --- 4 pcsScrew for display housingFlat Washer --- 4 pcsLag Bolt Arm --- 2 pcs Screw --- 2 pcs1. To ensure safety, please read this manual carefully before installation and follow the instructions herein. Store this manual in a secure place for future …

• Aruba AP-130 Series (4 pages) Aruba AP-130-MNT-W2Installation Guide0511078-01 |February 2012 1The AP-130 Series Wall Mount Kit 2 (AP-130-MNT-W2) allows you to mount your AP-130 Series access point to a flat surface or an electrical gang box. The AP-130-MNT-W2 can attach to several single and dual gangwall boxes, including US, UK and DIN standardized models.Package Contents AP-130-MNT- …

Comments, Questions and Opinions: