DW DWC-MV421D Operation & User’s Manual

Text of DW DWC-MV421D User Guide:

• DW DWC-MV421D, INSTALLATION* 11 1. Verify all parts are in the box. 2. Run cables into the mount. 3. Use the mounting template to make pilot holes. Use the dry wall anchors and wood screws to attach the assembly to the wall. 4. Attach the camera’s Surface Mount Plate to the Wall Mount. 5. Connect all cables and snap the camera module onto the base. 6. Adjust the camera and secure the cover dome over the camera module. 1 2 3 4 5 6 Wall Mount for V4 Housing

• WEBVIEWER* Setup > Record > Schedule This setup screen allows you to view and setup your SD card for local EMERGENCY recording. The camera will record to the SD card only when no network connection is detected. To backup recorded data from the camera’s SD Card: 1. Go to the Remote Backup Tab in the camera’s Setup menu. 2. On the calendar, select the date for remote bac

• DW DWC-MV421D, WEBVIEWER* Setup > Network > Network Settings Use this setup page to adjust the camera’s network settings. • IP Mode: Select the type of IP address for the camera. - DHCP: Select this option if you have a DHCP Server and would like your camera to obtain its network settings automatically. - PPPoE: Select this option when you use WAN service. You will need a Username and Password from your Internet Service Provider. - Static IP: Manually enter the camera’s network information. • IP Address: Enter the static IP Address of the camera • Sub

• DW DWC-MV421D, Setup > System > E-mail Notification Send an e-mail notification when an event is triggered. 1. Select Use Event Mail option. Select Event Type. 2. Enter SMTP Server information. Example: smtp.gmail.com. 3. Enter Username and Password. 4. Enter Sender E-mail. 5. Add the E-mail(s) you wish to send the notifications to. 6. Select Apply to save changes. WEBVIEWER* 51 *Email Notifications do not support TSL/SSL option. Notifications are TEXT only.

• DW DWC-MV421D, Setup > System > Logs View User can view detailed logs for system and/or events triggered and recorded in the camera. To view a camera log report: 1. Select the type of report you want to view: System, Event, or System & Event. 2. Press View. The system will generate a report up to 140,000 bits of data. 3. For events to record, make sure the camera is set to record when an event, like motion detection, is triggered. 4. You can export the log report by pressing ‘Export All’. WEBVIEWER* 54

• DW DWC-MV421D, WEBVIEWER* Setup > Event > Motion Detection The Motion detection feature allows the MEGAPIX camera to detect motion and trigger an alarm. To set the camera to send e- mail notifications for every motion triggered alarms, see page xx. To setup motion detection: 1. Check the Use Motion box. 2. Sensitivity: Select from Low, Middle, or High. 3. Dwell Time: When a motion is triggered, the camera can be set to record for a certain period of time. Dwell Time can be set up to 900 seconds. 4. Relay: an alarm out triggered by motion detection. Select None or 1. 5. Duration: determines how long the alarm out will last. Maximum is 900 seconds. 6. Select Apply to

• DW DWC-MV421D, Remote Video Monitoring Via Chrome, Firefox, or Safari Yo u can view your MEGAPIX camera using web browsers other than Internet Explorer. To do so, at least one of the streams of the camera must be set to the codec MJPEG. 1. Open Google Chrome, Mozilla Firefox, or Apple Safari Web Browser. 2. Enter the IP camera’s IP address. NOTE: If the first stream is set to H.264, then a video will not be displayed on the GUI. 3. Click the Setup button. Then go to Video & Audio > Stream Settings. 4. Modify one of the two streams to the codec MJPEG. 5. Click Apply to make sure all changes have been

• DW DWC-MV421D, WEBVIEWER* Setup > Record > Storage Device This setup screen allows you to view and setup your SD card for local EMERGENCY recording. The camera will record to the SD card only when no network connection is detected. • Device Information: - Click the icon Load Device Information to find the SD card connected to the camera. - The system will display all storage devices currently connected to the camera. - To activate the SD card to start recording, select Record Start. - To stop the SD card’s recording, select Record Stop. • Recording Information: - This section displays the first and last recorded data available on the

• DW DWC-MV421D, Resetting the Camera Pressing the reset button on the camera’s control board for five (5) seconds will initialize all environmental variables to factory default. Previous setup for IP default, time, etc. will be deleted. If a system’s IP address is lost, reset the camera back to factory default. The following are the default network settings. IP Mode DHCP IP Address 192.168.1.123 Subnet Mask 255.255.255.0 Gateway 192.168.1.123 Base Port 7000 HTTP Port 80 CAMERA REBOOT* 20 *Frequent use may cause syst

• DW DWC-MV421D, Snapit Easy Installation 1. For the installation process, remove the junction box from the camera module. To remove the camera dome, loosen the three (3) screws on the dome using the wrench provided with the camera. 2. Use the camera’s mounting template or your camera’s junction box to mark the holes as required. 3. Drill holes into the mounting surface and insert the drywall mounts into the holes. 4. Pull wires through and make connections. See page 14 for more information 5. Secure the Camera module to the junction box using three (3) screws. 6. Check the LED light. Green light flickers fo

• DW DWC-MV421D, WEBVIEWER* Setup > Event > Motion Area The Motion detection feature allows the MEGAPIX camera to detect motion and trigger an alarm. To set the camera to send e- mail notifications for every motion triggered alarms, see page xx. To adjust the camera’s motion detection zones: 1. Hold the left mouse button and drag the mouse pointer over image to select the motion area, or use Set All button to select the entire screen. 2. Select Clear All to deselect motion areas. 3. Select Apply to save changes. 35

• DW DWC-MV421D, SD Card Use the diagram below for installation of 15an SD Card for local emergency backup. When setup properly, the camera will record to the local SD card when it detects it is not recording to any servers and is not connected to the network. To install the SD card: 1. Locate the SD card slot in the back of the camera module. 2. Insert the SD card in the slot and push it down, until you hear a ‘click’ sound. 3. To remove SD card, press the SD card down until you hear a ‘click.’ The SD card will eject from the slot. 4. When you are complete, go to the camera’s web viewer. (Se

• DW DWC-MV421D, WEBVIEWER* Setup > Record > Schedule This setup screen allows you to view and setup your SD card for local EMERGENCY recording. The camera will record to the SD card only when no network connection is detected. Video Schedule 1. Set recording schedule daily or weekly. Default is daily setting. It only saves single day’s setting without changing to ‘Multi Day Mode.’ 2. Select the type of recording: Continuous (Cyan), Motion (Yellow) & Sensor (Red) by clicking on the corresponding button. 3. Drag your mouse over the hours you want to set for motion recording. The recording mode will be applied to the hours you sele

• DW DWC-MV421D, Setup > System > User Access Control Use this setup screen to add, edit, or delete users with access to the camera. To add a new user: 1. Enter Username and Password. 2. Select a Permission type. - Super: Administrator - Operator: View and Edit Video and Event Settings Only - Viewer: View Only 3. Click Add. 4. To modify a user, select the user from the User List, and click Modify. 5. To remove a user, select the user from the User List, and click Remove. 2 1 3 4 WEBVIEWER* 52 *The maximu

• DW DWC-MV421D, PRECAUTIONS  Do not open or modify.  Do not open the case except during maintenance and installation, for it may be dangerous and can cause damages.  Do not put objects into the unit.  Keep metal objects and flammable substances from entering the camera. It can cause fire, short- circuits, or other damages.  Be careful when handling the unit.  To prevent damages, do not drop the camera or subject it to shock or vibration.  Do not install near electric or magnetic fields.  Protect from humidity and dust.  Protect from high temperature.  Be careful when installing near the ceiling of a

• NETWORK LAN 802.3 Compliance 10/100 LAN Video Compression Type H.264, MPEG4, MJPEG (Super Fine ~ Low) Resolution 1920X1080 (16:9) ~ 320X240 (4:3) Frame Rate Up to 30fps at All Resolutions Stream Capability Dual-Stream at Different Rates and Resolutions IP IPv4, IPv6 Protocol TCP/IP, HTTP, DHCP, PPPoE, ICMP, ARP, RARP, RTSP, NTP, UDP, Multicast Maximum User Access 20 Users Memory Slot Local SD

• DW DWC-MV421D, Display Screen > Record Instantly record live video to your local drive. To Start and Stop Instant Recording: 1. To Start, right-click anywhere on the display screen. 2. Select Start Rec. The icon on the top right of the screen will change to INSTANT. 3. To Stop, right-click anywhere on the display screen. 4. Select Stop Rec. The video will be displayed in the designated folder when recording is complete. WEBVIEWER* 27

• DW DWC-MV421D, WEBVIEWER* Setup > Network > Access Permission Use the Access Permission page to allow or block specific IP addresses to connect to the camera. 1. Select Allow All to allow anyone to connect to this camera. If Allow All is selected, the Allowed IP List and Blocked IP List will be ignored. 2. To allow only a specific list of IP addresses to connect to this camera, select Allow. Enter an IP Address and click the Add button. 3. To block a specific list of IP addresses from connecting to this camera, select Block. Enter an IP Address and click the Add button. 41

• DW DWC-MV421D, There are no express warranties except as listed above. The Warrantor will not be liable for incidental or consequential damages (including, without limitation, damage to recording media) resulting from the use of these products, or arising out of any breach of the warranty. All express and implied warranties, including the warranties of merchantability and fitness for particular purpose, are limited to the applicable warranty period set forth above. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an i

• 12 INSTALLATION* 1. Verify all parts are in the box. 2. Attach the top shield to the pendant mount. 3. Run all necessary cables from the ceiling to the mount. 4. Use the mounting template to make pilot holes. Use the dry wall anchors and wood screws to attach the assembly to the wall. 5. Connect all cables and verify camera is operating properly. 6. Attach the

Related Products and Documents (IP Camera):

Comparable Devices:

Similar Resources:

• Bosch NBC-225-P (2 pages) CCTV | HD 720p IP Camera 200 SeriesHD 720p IP Camera 200 Serieswww.boschsecurity.comThe Bosch NBC-265-P 720p IP camera is aready-to-use, complete network videosurveillance system inside a compact camera.This camera brings Bosch’s high-performancetechnology into the realm of small office andretail businesses by offering a cost-effectivesolution for a broad …

• FLIR T420 (122 pages)    www.GlobalTestSupply.comQuality FLIR Products Online at: [email protected] …

• D3D Smart IP Camera (10 pages) D3D Smart IP Camera Easy User Manual- Basic Settings More information, please contact D3D support team or visit https://www.d3dsecurity.com/ https://www.d3dsecurity.co.uk/ …

• Planet ICA-525 (80 pages) 20 meter IR Vandal Proof Dome Internet Camera ICA-525 User’s Manual Version: 3.00 1 Date: April. 2009 …

• Eaton Crouse-hinds series (20 pages) Explosionsgeschützte Steckvorrichtungen, 16A 7-polig, GHG 511 .7.. / GHG 592, 10A 21-polig, GHG 511 .9../ GHG 591Explosion-protected plugs and sockets, 16A 7-pole, GHG 511 .7.. / GHG 592, 10A 21-pole, GHG 511 .9../ GHG 591Fiches et prises à 16A 7 pôles, GHG 511 .7../ GHG 592, à 10A 21 pôles, GHG 511 .9.. / GHG 591, pour atmosphères …

• Bosch NIN-70122-F1 (9 pages) Video | FLEXIDOME IP panoramic 7000 MPFLEXIDOME IP panoramic 7000 MP www.boschsecurity.com u 12MP / 30 fps sensor for fine details with smoothmotionu Edge or client-side dewarping for easy integrationu Intelligent Video Analysis on full panoramic overviewu Discreet and aesthetic, low-profile designu Easy twist-click installationThe FLEXIDOME IP panoramic …

Comments, Questions and Opinions: