FANATEC ClubSport Wheel Base V2 Manual
|
24 When the update is done the Club- Sport Wheel Base V2 must be restart- ed by pressing the button ‘Restart Wheel’ which is available after rm- ware update is completely nished as shown on the right hand side: The ClubSport Wheel Base switches off and automatically on again. IMPORTANT: The ClubSport Wheel Base V2 is secured by rmware and by driver so that
FANATEC ClubSport Wheel Base V2, 27 6.3.4 SHO (Shock) SHO range: OFF 010 ... 100 SHO default: 100 The strength of the shock / vibration motors inside the FANATEC Steering Wheel can be adjusted from 100% to 0%. These vibration motors can be used by a game directly (Fanatec SDK) or by the ABS function. 6.3.5 ABS ABS range: 000 … 100 OFF ABS default: OFF This feature can give you a direct and feel-able feedback about your brake inputs. If you set the value to 100 the vibration will start as soon as you give 100% brake input to the game. If you set it to 95% the vibration will start if you push the brake to 95% or more. The ABS feature uses the vibration within your wheel rim (can be turned
FANATEC ClubSport Wheel Base V2, 26 6.3 Tuning menu The tuning menu is shown on the tuning display on the Fanatec Steering Wheels after activating the tuning menu by pressing the tuning menu button (see chap- ter ‘Hotkeys’ of this user manual). To navigate through the tuning menu press up, down, left and right direction at the FunkySwitch TM of the Fanatec Steering Wheel or turn the FunkySwitch TM clockwise / counter clockwise. Note: At the ClubSport Universal Hub you can also use the D-Pad buttons on top of the Universal H
30 ELECTRICAL OPERATION 7.1 Hotkeys 7.1.1 Tuning menu To enter the tuning menu use tuning menu button (usually the small black but- ton close to the LED display of the used Fanatec Steering Wheel; see correspond- ing quick guide of your Fanatec Steering Wheel). The picture just shows the tuning menu button on top of the ClubSport Uni- versal Hub as an example: 7.1.2 Wheel
FANATEC ClubSport Wheel Base V2, 22 When Bootloader mode is active the fans are OFF and the LED ring around the red power button ‘START’ on the front plate of the ClubSport Wheel Base V2 is lit blue (all 4 segments). On the PC screen this window will appear automat- ically as shown on the right hand side: Click on the upper button ‘Start rmware updater’. Then a new window will appear as shown on the right hand side: Connect to your ClubSport Wheel Base V2 by pressing the button ‘Con- nect’.
FANATEC ClubSport Wheel Base V2, 20 If you go to the PC driver page ‘Settings’ you will see this window: There are two different slider bars in the section ‘Steering wheel’: The upper bar ‘Wheel angle’ can adjust the maximum turning angle of the Club- Sport Wheel Base V2, so the functionality is identical with the option ‘SEN’ in tuning menu (see chapter ‘Tuning Menu’ of this manual for more detailed information). Please note that in tuning menu the value for ‘SEN’ must be set to ‘OFF/Aut’ to allow the PC driver to take the control. If in tuning menu ‘SEN’ is set to any other value
FANATEC ClubSport Wheel Base V2, 32 Put the H-pattern shifter’s lever into the position shown on the LED display and acknowledge each single position by pressing START (10) to get to the next one. The following pictures show the instructions on the LED display of the Universal Hub but are similar on the other Fanatec Steering Wheels: ................neutral position ..........................rear ....................... 1 st gear .......................2 nd gear ....................... 3 rd gear ....................... 4 th gear ....................... 5 th gear ....................... 6 th ge
FANATEC ClubSport Wheel Base V2, 18 Indicator bar shows the current Steering Wheel position, the upper box shows the posi- tion in digits, the lower box shows the position as an angle (positive and negative angle re- lated to the calibrated wheel center position). The button ‘display test’ activates a signal ow on the LED display of the at- tached Fanatec Steering Wheel and activates all LED display segments so you can check if all LED display segments work properly. The button ‘FFB test’ starts a force feedback test and activates the motor of the ClubSport Wheel Base V2 to check proper functionality. The button ‘Rev LEDs test’ starts a
FANATEC ClubSport Wheel Base V2, 19 The ‘2GS’ indicator shows the activation of the 2GS (two gears shifter, sequential shifter, SQ) by lling the two little squares with blue colour, depending on activated shifting up or shifting down. This can be for example the ClubSport Static Shifter Paddles (CS SSP) or the ClubSport Shifter SQ (CSS SQ) in sequential mode if these are not mapped to the Steering Wheel shifter paddles. The ‘H-pattern’ indicator shows the activation of the 6GS, 7GS or 8GS (six gears shifter, seven gears shifter or eight gears shifter) by lling the little squares with blue colour, depending on
FANATEC ClubSport Wheel Base V2, 33 TROUBLESHOOTING 9 The ClubSport Wheel Base V2 must not be modied differently than described in this manual. Endor® AG expressly prohibits analysis and utilization of the electronics, hardware, software and rmware contained in the controller. In case difculties occur in connection with utilization of the ClubSport Wheel Base V2, please use the following guide for elimination of errors. On the website www.fanatec.com/support you will nd further details and contact data. If the ClubSport Wheel Base V2 is not working properly: Problem description Solution After rmware update of the ClubSport Wheel
FANATEC ClubSport Wheel Base V2, 10 ASSEMBLY 5.1 Plan your conguration To operate the ClubSport Wheel Base V2 a Fanatec Steering Wheel with quick release is required (e.g. the BMW M3 GT2, the Porsche 918 RSR or the Uni- versal Hub). Just plug your steering wheel onto the quick release and get start- ed. Connect the ClubSport Wheel Base V2 to your PC or PlayStation 3 system by using the USB cable. IMPORTANT: Use only the USB cable with the 90° plug which is pack- aged with your ClubSport Wheel Base V2 to avoid damages on the Club- Sport Wheel Base V2 electronics! Please check chapter ‘Connections’ to see which kind of peripheral devices must be connected to which socket at the ClubSport Wheel Base V2.
FANATEC ClubSport Wheel Base V2, 38 WARRANTY 15 Please check the FAQ database at www.fanatec.com/support to see if your problem can be solved there. Normally, the warranty period is one year. How- ever, this may differ depending on the respective state. 1) Endor ® AG grants for the hardware product – as extension of shorter na- tional warranty regulations, if applicable a one- year warranty for material and manufacturing defects. The warranty does not include defects that are due to commercial use of the product and/or
FANATEC ClubSport Wheel Base V2, 17 6.1.1 PC driver The PC driver is a very helpful tool as it can assist the user to do functional tests, adjustments and update procedure on the ClubSport Wheel Base V2. When you start the driver this window as shown on the right hand side will appear and show all connected USB devices: Double-click the ClubSport Wheel to go ahead and see the complete menu. The next appearing menu ‘function test’ then is depending on the attached Fanatec Steering Wheel. For the manual there is used the ClubSport Universal Hub
5 ATTENTION • The device must not be exposed to rain or humidity in order to avoid risk of re and the danger • of electric shock. • Operating temperature: 15°C – 35°C room temperature • The recommended operation time of the wheel with continuous force feedback activity is 1 hour. Let the wheel cool down for a few minutes before you continu
FANATEC ClubSport Wheel Base V2, 34 Problem description Solution The tuning display does not show anything or is not working partially. Try to use another Steering Wheel. If this is also not working properly the ClubSport Wheel Base V2 might be damaged. Check the pins inside the quick release of the Steering Wheel, these must not be bent or damaged. Center calibration with Universal Hub is not work- ing because of missing d-pad / sticks. For the Universal Hub there is a different but- ton combination than for other Fanatec
FANATEC ClubSport Wheel Base V2, 37 FCC COMPLIANCE CE COMPLIANCE 13 14 This device complies with part 15 of the FCC rules. The operation of this device is subject to the following two conditions: • This device may not cause harmful interference, and must accept any interference received, including interference that may cause undesired operation. • This device was not modied different than described explicitly in this user manual. Note: This device was tested and approved to the limitations for class B of digital devices accord
FANATEC ClubSport Wheel Base V2, 8 PREPARATION 4.1 Package contents 4 ClubSport Wheel Base V2 ClubSport Wheel Base 20° mounting socket (comes assembled) Power supply (different versions for Europe EU, United States of America US, Australia AU and Japan JP) USB connection cable with 90° plug O-Ring (O1) Screws (S1) Quick Guide + Drilling templates
15 ATTENTION: Please download and print the drilling templates for mounting with and without 20° mounting adapter from the download area of our website www.fanatec.com. Printed drilling templates are included inside the ClubSport Wheel Base V2 package. 80,9 90,6 70 100 4x M6 thread (rig hole 7mm) steering axis centerline driver side CSW V2 with Adapte
FANATEC ClubSport Wheel Base V2, 14 5.6.1 USB The USB port is used to connect the ClubSport Wheel Base to the PC or Play- Station 3. IMPORTANT: Use only the USB cable with the 90° plug which is pack- aged with your ClubSport Wheel Base V2 to avoid damages on the Club- Sport Wheel Base V2 electronics! 5.6.2 SHIFTER1 The SHIFTER1 port is used to connect H-pattern shifters to the ClubSport Wheel Base V2, e.g. the ClubSport Shifter (CSS) or the ClubSport Shifter SQ (CSS SQ) in H-pattern mode. Also sequential shifters can be con
FANATEC ClubSport Wheel Base V2, 4 WARNING! Photosensitive Seizures A very small percentage of people may experience a seizure when exposed to certain visual im- ages, including ashing lights or patterns that may appear in video games. Even people who have no history of seizures or epilepsy may have an undiagnosed condition that can cause these „pho- tosensitive epileptic seizures” while watching video games. These seizures may have a variety of symptoms, including light-headedness, altered vision, eye or face twitching, jerking or shaking o
16 The ClubSport Wheel Base V2 has an own rmware handling the device com- munication to PC or PlayStation 3 as well as to other hardware peripheral de- vices like shifters and pedals. And the rmware provides different functions for the user. 6.1 Firmware and driver update The rmware and the PC driver can be updated to newer versions by Fanatec for software bug xing or
M.T.H. RAILKING N&W J WITHPROTO-SOUND 2.0READY-TO-RUN TRAIN SET Video Game Controller Operating instructions manual
RAILKING N&W J WITHPROTO-SOUND 2.0READY-TO-RUN TRAIN SET |
FANATEC CSL Elite Racing Wheel Video Game Controller Manual
CSL Elite Racing Wheel |
FANATEC McLaren GT3 Video Game Controller Manual
McLaren GT3 |
Saitek X52 Video Game Controller Instruction manual
X52 |
FANATEC CSL Elite Pedals Video Game Controller Manual
CSL Elite Pedals |
FANATEC SPEEDTER PURE Video Game Controller Manual
SPEEDTER PURE |
Thrustmaster HOTAS WARTHOG Video Game Controller Hardware user manual
HOTAS WARTHOG |
FANATEC Forza Motorsport CSR Wheel Video Game Controller Manual
Forza Motorsport CSR Wheel |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | HP | 8700 | Operation & user’s manual | hp/8700-5W2.pdf | 23 Nov 2023 | 83 | |
2 | Whirlpool | WRT351SFYB | Energy manual | whirlpool/wrt351sfyb-492.pdf | 04 Jun 2023 | 1 | |
3 | ProForm | STRIDE SELECT PFEL3926.0 | Operation & user’s manual | proform/stride-select-pfel3926-0-8ZY.pdf | 27 Feb 2023 | 24 | |
4 | Wheelock | MZC-144 | Installation instructions manual | wheelock/mzc-144-7J1.pdf | 29 Dec 2023 | 25 | 0.67 Mb |
5 | Peavey | XXL | Operation manual | peavey/xxl-FT8.pdf | 27 Jun 2023 | 14 | 9.14 Mb |
6 | Dynex | DX-WDCMBO-UK | Setup manual | dynex/dx-wdcmbo-uk-16A.pdf | 07 Feb 2023 | 1 | 0.6 Mb |
Seeed
1 Grove - Thumb Joystick Version: 1.0 Release date: 9/20/2015 Wiki: http://www.seeedstudio.com/wiki/Grove_-_Thumb_Joystick Bazaar: http://www.seeedstudio.com/depot/Grove-Thumb-Joystick-p-935.html
…
101020028(14 pages) |
Miller
Quick Start GuideCongratulations! You are now the proud owner of an incredibly rare Miller Lite Cantroller! Below you’ll find everything you need to connect so you can play and drink your Cantroller at home. Note: Drinking your Cantroller will hinder playability. COMPATIBILITY: The Cantroller is compatible with Steam across both Mac and PC Platforms. HOW T …
Lite Cantroller Series(2 pages) |
SHAKS
S2i User Manual 1S2i User ManualIf any question, contact us SHAKS.official on facebook.SHAKS S2i/S3i/S5i supporting four 4 modes, Android / Windows / iOS, and Mapping, each mode of which is recognized individually by its corresponding host game device. For example, when SHAKS is in android mode, it will connect to your android smartphone/tablet, it …
S2i(9 pages) |
FANATEC
Skip to contentManuals+User Manuals Simplified.FANATEC ClubSporrt Steering Wheel Formula UserGuideHome » FANATEC » FANATEC ClubSporrt Steering Wheel Formula User Guide Contents [ hide1 FANATEC ClubSporrt Steering WheelFormula2 PACKAGE CONTENTS3 QUICK RELEASE ADAPTER ATTACHMENT4 CENTRE CALIBRATION5 SHIFTER CALIBRATION6 TUNING OPTIONS7 MODES8 BUTTO …
ClubSporrt Steering Wheel Formula(10 pages) |
Thrustmaster
1/6 User Manual TECHNICAL FEATURES D-pad 2 progressive analog gas and brake levers and action buttons Pedal Wheel-to-pedal connector Wheel-to-pedal connection cable Receiver For PCs (Windows 98 or higher) equipped with USB ports
…
Enzo Ferrari wireless(42 pages) |
Lanier R/C
Lanier R/C 1.20 Edge 540T Almost Ready to Fly WARNING! THIS IS NOT A TOY! THIS IS NOT A BEGINNERS AIRPLANE This R/C kit and the model you will build from it is not a toy! It is capable of serious bodily harm and property damage. It is your responsibility, and yours alone - to build this kit correctly, properly install all R/C components and flying gear ( …
Video Game Controller(14 pages) |
Philips CRT TV 29PT5221CRT TV #8U9Z5P 29PT5221, 3 |
Hotpoint Hob G750Hotpoint Hob Instructions for installation and use manual (File: hotpoint-g750-instructions-for-installation-and-use-manual-16, 16th Oct 2023) G750, 16 |
Multi-Link Controller IP-4000Controller Quick installation manual (Multi-Link IP-4000) IP-4000, 2 |
Mojave Dryer V3Dryer #795KM4 V3, 8 |
LG Cell Phone LG221CLG Cell Phone LG221C Operation & user’s manual LG221C, 95 |
Revolabs Conference System 10-FLX2-200-POTS10-FLX2-200-POTS System manual - X95O7J 10-FLX2-200-POTS, 57 |
NETGEAR Modem WGT624v1 - 108 Mbps Wireless Firewall RouterNETGEAR Modem WGT624v1 - 108 Mbps Wireless Firewall Router Reference manual WGT624v1 - 108 Mbps Wireless Firewall Router, 152 |
Crosley Dishwasher Conservator CUD4000Dishwasher PDF Use & care manual Conservator CUD4000, 16 |
Omega Weather Station WMS831Weather Station PDF Operation & user’s manual WMS831, 12 |
Paradyne Multiplexer 3610Paradyne Product User Manual: 3610 PDF Operator's manual - 4XWMVZ 3610, 310 |
QSC Sound Card DDI-11#3925VN: DDI-11 Sound Card Installation manual DDI-11, 8 |
GRASS VALLEY Software KAYENNE - S V3.0User Manual: GRASS VALLEY KAYENNE - S V3.0 (933P9J, Upd.Mon 01.2024) KAYENNE - S V3.0, 60 |