Excelltel CDX-IPH301 Operation & User’s Manual

Text of Excelltel CDX-IPH301 User Guide:

• CDX-IPH301 -VoIP User Manual V1.0 12 10 Used as Mute 11 Used as phonebook 12 Navigation key used as UP in menu or Increase handset / speakerphone volume 13 Navigation key used as DOWM in menu or reduce handset / speakerphone volume 14 Navigation key used as LEFT in menu or reduce handset/speaker volume 15 Navigation key used as RIGHT in menu or increase handset

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 43 NOTE: SOME ISP INTERNET MAY INHIBIT THE PHONE TO REGISTER AND CANCEL THE REGISTER IN SUCCESSION, SO USER HAD BETTER NOT APPLY OR REGISTER AND CANCEL SOON IN SUCCESSION AND SUBMIT REGISTRATION REPEATEDLY. SERVER MAY STOP RESPONSE OF DIALOGUE MACHINE, THEN THE PHONE RECEIVES NO CERTIFICATION OF REGISTER/CANCEL LOGIN REQUEST AND REGISTRATION STATE WILL SHOW AS INCORRECT! 11 Save and Clear Configuration User can save the current configuration on this page. The system configuration can be set as factory default configuration on clear config page and the phone will restart automatically. 12 Secur

• CDX-IPH301 -VoIP User Manual V1.0 11 Key Button Key Button Definitions 1 0 - 9, *, # Digital, star and pound keys are also used for setting and call process. 2 Menu/OK Menu: enter the main menu, or confirm current status 3 DEL delete the current editing content or delete the incorrect number in pre-dial mode 4 Sys Info Display local IP address on LCD display the current registered account

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 51 Configure VPN server port; Configure VPN server group ID; Configure VPN server area code; Configure enable/disable VPN tunnel; (2) Select L2TP, and configure VPN: Select L2TP mode; Configure VPN server address; Configure VPN User Name; Configure VPN Password; Configure enable/disable VPN; 13 Upgrade on-line 13.1Upload WEB page On this page, user can select the upgrade document (firmware or config file)

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 58 The modified username; Modify user authorities; Modify user password; Make confirmation of the modified user password; Submit the modification; Owing to the phone's default account: accounts of the administrator level-admin and the ordinary level － guest are all weak account and weak password, the username and password will be easily to be guessed on public network, so the user had better modify the administrator and ordinary user. Enter with manager level when making modification, create a administrator account and a browse account (you'd better not se

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 55 Input user name of desired FTP server. Input user password of desired FTP server. Input name configuration file. Software version must be different for each upgrade file. If configuration file is encrypted, password needed. Chose server type as either FTP or TFTP. Set auto-upgrade interval duration. Chose auto-upgrade type. 13.6 Configuration files WEB download On this page, user can directly select the configuration files on the hard disk of the computer, and then make modification to the system configuration, afte

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 14 number, ring types. During the operation, press Local IP/DEL to delete wrong digit. -press till LCD display “Search”, then press , input name of desired number and press to check the item, if you want to edit it, press Local IP/DEL while LCD displays “0=mod 1=del”, then press 0/1 to modify/delete. 6.3 Call list check / delete / dial out In standby, press , LCD display “Call Record Dialed”, -Press to check last dialed out number and conversation time, press and to review others; press 【#】to dial ou

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 18 If the web login port of the phone is configured as non-80 standard port, then user need to input http://xxx.xxx.xxx.xxx:yyyy, otherwise the web will show that no server has been found. 8.1 Login Web While input correct IP address as above, logon menu pop out as follows: There are two level login as: -Guest account: the default username and password is "guest", user can have a browse of system. -Administrator account: the default username and password is "admin", this user can configure the system.

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 4 13.5 AUTO-UPDATE............................................................................ 54 13.6 CONFIGURATION FILES WEB DOWNLOAD................................. 55 14 SYETEM MANAGEMENT............................................................ ........56 14.1ACCOUNT MANAGEMENT............................................................ 56 14.2CONFIGURATION EXPLANATION:................................................ 56 14.3 TIME ZONE CONFIGURE............................................................. 59 15 CONFIGURATION VIA TELNET....................

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 59 14.3 Time zone configure On this page, user can save and configure time zone setting. Configure the desired time zone. 15 Configuration via Telnet In DOS window, input telnet 192.168.10.23, enter:

• CDX-IPH301 -VoIP User Manual V1.0 35 user's calling number(the prefix number length),then the phone will use this number's IP address image or configuration to make the call. When configuring the prefix matching, letter "T" should be added behind the prefix number to be distinguished from the exactitude matching; the longest length is 30 bits. Configure destination addres

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 65 ports, if input as PORT X, valid only to port X. Some parameter only valid to some port, then PORT X is needed, otherwise, error report as “Error: Missing parameter”. Path: <config–port># [no] accept-relay - <command>Set accept relay mode [no] calltransfer - <command>Enable/Disable call transfer [no] callwaiting - <command>Enable/Disable call waiting codec - <command>Set Codec [no] fastcalling - <command>Set fastcalled number handdown - <command>Hand down delay [no] in-limit - <command>Set the number which will be not accepted [no]

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 6  2*16 character LCD  34 KEYS, 1 LED  WAN: 10/100M RJ45  LAN: 10/100M RJ45 (Option) 3.2 DSP Spec  G.711A/u, G.723.1（5.3k/6.3k）, G.729a/b,G.722,G.726  G.168 echo cancel  Full duplex hand-free  VAD (Voice Activity Detection)  CNG (Comfortable Noise Generation)  AEC (Acoustic Echo Cancellation)  Adaptive voice jitter buffer  Codec negotiation supported for fixed and dynamic 3.3 SIP Protocol Spec  RFC Protocol Edition: RFC3261 and RFC2543  Compatible with all major SIP Servers: Cisco, Osip, Vocal, s

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 17 Network IP LAN Bridge Mode WAN 255.255.255.0 192.168.10.1 0[OFF] 1[ON] NetMask Static net PPPoE DNS2 DNS Gateway Netmask IP Password User name 8 Web Interface Configuration The IP Phone Web Configuration Menu can be accessed by the following URI: http://Phone-WAN IP-Address/. The default WAN IP address is dynamic acquisition, press can access the IP address.

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 52 on hard disk of the computer directly to run the system upgrade. After the upgrade has been completed, restart the phone and it will be usable at once. 13.2 FTP/TFTP download On this page, user can upgrade system and configure files by FTP or TFTP mode. 13.3 Configuration Explanation: Configure upload or download FTP/ TFTP server IP address; Configure username of the upload or download FTP server. If user select TFTP mode, username and password are not required to be configured; Configure upload or download of FTP server p

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 16 while line connected, press to make conference call; 7. Unit Configuration 7.1 IP distribution mode selection Press and hold 【1】 button for 5s, the LCD displays “STATIC MODE”; Press and hold 【2】 button for 5s, the LCD display “DHCP MODE”; Press and hold 【3】 button for 5s, the LCD display “PPPOE MODE”. 7.2 Configuration with keypad and LCD display In standby, press button till LCD shows " Input Password: " input correct password (default is 123), press key to enter the menu list. Then follow below menu list to set parameters accordingly. During configuration, operations as follows -For brows

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 48 Configure NAT of the Application Layer Gateway(ALG);the protocol includes: IPSec, FTP and PPTP. Display NAT table; Add and delete NAT table (configure NAT of the Transport Layer, the protocol includes: TCP and UDP); Select transfer type; Configure Inside IP; Configure Inside port; Configure Outside port; Add or delete NAT table; DMZ configuration

• CDX-IPH301 -VoIP User Manual V1.0 31 Select the Server type; DTMF sending mode configuration; three kinds: the above are basic configurations of SIP. Enable the phone to use protocol edition. When the phone need to communicate with phones which is using SIP1.0 such as CISCO5300 and so on, then it should be configured into RFC2543 to communicate normally. the

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 39 Configure the fifth codec; Configure handdown time, that is, if the hooking time is shorter than this time, then the gateway will not consider the user has handdown. Configure input volume; Configure output volume; Configure handfree volume; Configure ring volume; Configure G729 payload length; Configure signal standard; Configure G.722 timestamps; Configure G.723 bit rate; Configure default ring type; Configure enable/disable VAD. 10.2 Call service configuration On this page, u

• CDX-IPH301 -VoIP User Manual V1.0 5 1 Before Getting Started Before you can connect IPH301 to the network and use it, you must have a high-speed Internet connection installed. A high-speed connection includes such environments as DSL, cable modem, and a leased line. IPH301 IP phone is a stand-alone device, which requires no PC to make Internet calls. IPH301 IP is fully compatible with SIP and IA

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 20 User will be authorized to set the network IP, Gateway and DNS if the system adopts the static linking mode. If the system selects DHCP service in the network which is using DHCP service, IP address will be gained dynamically. If the system selects PPPOE service in the network which is using the PPPOE service, then the IP address will be gained by the set PPPOE ISP internet and password of the account. Note: If IP address has been modified, the web page will no longer respond owing to the modification, so new IP address should be input in the address field now. Configuration Explanation:

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 40 forwarding, call transfer (CT), call-waiting, three way call, blacklist, out-limit list and so on. Configuration Explanation: Configure hot-line number of the port. With this number of the port, this hot-line number will be dialed automatically as soon as off-hook and user can't dial any other number; Configure no answer time; Configure enable/disable Do Not Disturb; Configure enable/disable Ban outgoing; Configure enable/disable call transfer (CT); after it is enabled, there are two

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 23 Enable RTP initial port configuration. It is dynamic allocation; Configure the maximum quantity of RTP port. The default is 200; Leased IP-MAC correspondence table of DHCP; ※The configuration on this page needs to be saved after modified and will go into effect after restarting. ※If the Telnet, HTTP port will be modified, the port is better to be set as greater than 1024, because less than 1024 port system will save ports. ※Set the HTTP port as 0, then the http service will be disabled.

• Excelltel CDX-IPH301, CDX-IPH301 -VoIP User Manual V1.0 50 12.4 VPN configuration On this page, user can save and configure VPN setting. Display the VPN IP of the IPH301; Select VPN mode, and configure enable/disable VPN; (1) Select UDP tunnel, and configure VPN: Select UDP tunnel mode; Configure VPN server address;

Related Products and Documents (IP Phone):

Comparable Devices:

Similar Resources:

• Panasonic DBS-576 (70 pages) DBS 576 - Version 5.0issued September 2001ACD/MIS Version 2.52 Issued July 2001Panasonica(Also supports DBS 576HD)Section 525ACD/MISReference ManualAutomatic Call Distribution (ACD)Management Information Systems (MIS) …

• UniData Communication Systems WPU-7800 (60 pages) WPU-7800 Global User’s Manual UniData Communication Systems, Inc VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299 …

• Nortel 1120E (2 pages) Getting Started Guide for Nortel™ IP 1120E/1140E/1220/1230 Telephone Sets Answer a Call To answer a call use one of the following options: Ö Lift the handset. Ö Press the Handsfree key. Ö Press the Line (DN) key beside the LCD indicator as it flashes. Ö Press the Headset key. Place a Call Ö Lift the handset and dial the numbe …

• Mitel 3300 CITELlink (2 pages) OUTGOING CALL Lift handset - Press 9 - Dial number REDIAL Lift handset - Press REDIAL key INTERCOM CALL Lift handset - Dial EXT. NUMBER on dialpad ANSWER A 2ND Press HOLD key to put the first caller on hold - Press ringing DN Key to CALL WHEN ON receive the 2nd call - if needed, put 2nd caller on HOLD - Press A CALL 1st DN Key and you wi …

• CyberData 011049 (97 pages) SIP Call ButtonOperations GuidePart #011049 Document Part #930801Mfor Firmware Version 11.7.6CyberData Corporation3 Justin CourtMonterey, CA 93940(831) 373-2601The IP Endpoint Company …

• Panasonic KX-T7625 - Digital Proprietary Speakerphone 24 Button (16 pages) Digital Proprietary TelephonesQuick Reference GuideModel KX-T7625 KX-T7630KX-T7633 KX-T7636Important InformationWhen using the KX-T7600 series, keep the following conditions in mind.• If there is any problem, unplug the extension line and connect a known working phone. If the known working phone operates properly, have the defective phone repaired by a s …

Comments, Questions and Opinions: