Manualios.com

Electra C1545B Instruction Manual

Electra C1545B Manual Online:

4.5, 698 votes
Electra C1545B User Manual
Electra C1545B User Guide
Electra C1545B Online Manual

Text of Electra C1545B User Guide:

  • Detergent usage Use a detergent specifically designed for use in dom estic dishwashers. You can find powder,gel,and tablet detergents in the market that have been designed for household dishwashers. Detergent should be put into the compartment prior to starting the machine. Keep your detergents in cool, dry places out of reach of your children. Do not

  • 24 Faulty loads x x x        Important Note for Test Laboratories For detailed information on performance tests, please contact following address: "[email protected]” . In your email, please provide the model name and serial number (20 digits) which you can find on the appliance door.

  • Electra C1545B, 7 mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.Cleaning and user maintenance shall not be made by children without supervision. • Do not put into your machine those items which are not suitable for dishwashing. Also, do not fill any basket above its capacity.Our company will not be responsible for any scratch or rust to form on the inner frame of your machine due to basket movements otherw

  • Electra C1545B, Spray arms Check whether or not the holes for the upper and lower spray arms are clogged. If there is any clogging, remove the spray arms and clean them under water. You can remove the lower spray arm by pulling it upwards, while the upper spray arm nut can be removed by turning the nut to the left. Be sure that the nut is perfectly tightened when refitting the upper spray arm. Hose filter Water is prevented by the inlet hose filter so as to avoid any damage to your machine because of any contamination (sand, clay, rust etc.) that might be occasionally carried in through the mains water supply or the

  • Electra C1545B, Adjusting salt consumption Adjust the water softener according to how hard your tap water i s. Move the programme selector knob to the 0 (Reset) position while your machine is not in operation.1 After resetting your machine, press the Start/Pause button and keep it pressed down.2 Meanwhile, energise the machine by pressing the Power On/Off button. 4 Keep Start/Pause keys press until program monitor lights are on and off. 2 After the lamps “Wash/Dry/End” have flashed 3 , release the Start/Pause button. 2 Your machine displays the latest entered water ha

  • Electra C1545B, Changing a programme with resetting If you would like to cancel a program while a washing program is resumed Switching the machine off Note: You can slightly open the door in order for the machine to perform a faster dry operation after the wash programme is finished. Note: If the machine door opens during washing or the power is cut off, the machine will go on to the program in case the door is shut or the power is back. 28 Note: If energy is cut or machine door is opened during drying process, program is terminated. Your machine becomes ready for new program sel

  • Electra C1545B, CONTENTS • Technical specifications ……………………………………………………………… 4 • Conformity with the standards and Test data ………………………………………... 4 Safety information and Recommendations………………………................................ 5 • Recycling .......………………………........................................................................ ........ 5 • Safety information ………………………………………………………………………. 5 • Recommendations …...…………………………………………………………………. 8 • It

  • Electra C1545B, 14 Fitting the machine undercounter If you wish to fit your machine undercounter, check whether you have sufficient space under your countertop and whether the wiring-plumbing is suitable to do so.1 If you decide that the space under the countertop is suitable for fitting your machine, remove the worktop as shown in the illustration. 2 Warning:The stand part which we will settle our machine under it by removing its worktop has to be stable in such a way not to allow balance disorder. To remove the worktop, remove the screws that hold the worktop which are loca

  • Electra C1545B, If water is left inside the machine at the end of the programme • The water drain hose is clogged or twisted. • The filters are clogged. • The programme is not finished yet. If the machine stops during a wash operation • Power failure. • Water inlet failure. • Program can be on standby mode. If shaking and hitting noises are heard during a wash operation • Dishes placed incorrectly. • Spray arm hitting the dishes. If there are partial food wastes left on the dishes • Dishes placed incorrectly into the machine, sprayed water did not reach related places. • Basket overly loaded. • Dishes leaning against one another. • Very small amount of detergent added.

  • Electra C1545B, 5 SAFETY INFORMATION AND RECOMMENDATIONS Recycling • Certain components and the packaging of your machine have been produced from recyclable materials. • Plastic parts are marked with international abbreviations: (>PE< , >PS< , >POM<, >PP<, ) • Cardboard parts have been produced from recycled paper and they should be disposed of into waste paper collection containers for recycling. • Such materials are not suitable for being disposed of into garbage bins. They should be delivered to recycling centres instead. • Contact relevant

  • Electra C1545B, 22 Top basket height adjustment Top basket of your machine is in upper position. When it is in this position, you can place big items such as pans, etc. on lower basket. When you take top basket to lower position, you can place and wash big sized plates on the top basket. Use wheels in order to change the basket height. Open the basket retaining parts at the end of top basket rails by turning them to the sides, and take the basket out. Change the position of the wheels; reinstall the basket to the rail, and close basket retainer parts. In this way,

  • Electra C1545B, 26 GETTING FAMILIAR WITH YOUR MACHINE 1.) Power On/Off Button When the power on/off button is pressed,the lamp on the Start /Pause starts lighting. 7.) Salt Lack Warning Indicator In order to see whether softening salt in your machine is sufficient or not, check salt lack warning lamp on the display. When salt lack warning lamp starts coming on, you need to fill in the salt chamber. Rinse Aid Lack Warning Indicator In order to check that there is sufficient rinse aid in your machine, check rinse aid lack warning lamp on the display. When rinse aid lack warning lamp starts coming on, fill in rinse aid chamber. By using the &apo

  • 15 Adjust the machine feet according to the slope of the floor.3 Fit your machine by pushing it undercounter without letting the hoses get crushed or bent.4 Warning: After removal of worktop, the machine should be placed in such a closed place of which dimensions are shown at fig.

  • Electra C1545B, Prior to using the machine for the first time • Check whether the electricity and supply water specifications match the values indicated by the installation instructions for the machine. • Remove all packaging materials inside the machine. • Set the water softener. • Add 1 kg salt into the salt compartment and fill with water up to a level at which it will almost overflow. • Fill the rinse aid compartment. The importance of water decalcification For a good washing function, the dishwasher needs soft, i.e. less calcareous water. Otherwise, white lime residues will r

  • Electra C1545B, Your new Electra appliance carries a guarantee which protects you against the cost of repairs during the first 12 months from date of purchase provided that: Any claim is accompanied by evidence of the model reference, model serial number and proof of purchase, such as a Sales Receipt, showing that the appliance was purchased within the 12 months prior to the date of claim. TH IS DOES NOT AFFECT YOUR STATUTORY RIGHTS. What is not covered under the Guarantee? • Any appliance not correctly installed and operated in accordance with the manufacturer's in

  • Electra C1545B, 13 Electrical connection The earthed plug of your machine should be connected to an earthed outlet supplied by suitable voltage and current. If there is no earthing installation, have a competent electrician carry out an earthing installation. In case of usage without earthing installed, our company will not be responsible for any loss of usage that might occur. The indoor fuse current value should be 10-16 A. Your machine is set according to 220-240 V. If the mains voltage in your location is 110 V, connect a transformer of 110/220 V and 3000 W inbetween. The machine should not be plugged in du

  • Electra C1545B, • If such detergents are in the form of tablets, never put them into the interior section or the cutlery basket of the dishwasher. Always put the tablets into t he detergent compartment in the detergent dispenser. • They produce good results for certain types of usage only. If you are using this type of detergents, you need to contact the manufacturers and find out about the suitable conditions of use. • When the conditions of use of such products and the machine settings are appropriate, they ensure savings in salt and/or rinse aid consumption. • Contact the detergent manufacturers if

  • Electra C1545B, 6 • Check whether the indoor electrical fuse system is connected according to the regulations. • All electrical connections must match the values indicated on the rating plate. • Pay special attention and be sure that the machine does not stand on the electricity supply cable. • Never use an extension cord or a multiple socket for making a connection. The plug should be comfortably accessible after the machine has been installed. • After installing the machine to a suitable place, run it unloaded for the first time. In daily use • This machine is for household use; do not use it for any other purpose. Commercial usage of the dishwasher will void the gua

  • Electra C1545B, 1. Press the Power On/Off key. 2. Select the program suiting your dishes via the Program Selection button. 3. Start the program pressing the Power Start/Pause key. Switching on the machine Program follow-up You can follow the program flow using the program follow-up lambs located on the control panel. Changing a programme If you would like to change programs while a washing program is continuing. SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME 27 3. Once the Power On/Off key is pressed, the lamp Power Start/Pause is highlighted. Press once the Po

  • Electra C1545B, Testing strip The washing effectiveness of your machine depends on the softness of the tap water. For this reason, your machine is equipped with a system that reduces the hardness in mains water supply. The washing effectiveness will increase when the system is correctly set. To find out the water hardness level of water in your area, contact your local water board or determine water hardness level by using the test strip(if available). Adjusting salt consumption Table of Water Hardness Level Settings

  • If one of program monitor lights is on and start/Pause light is on and off, Your machine’s door is open, shut the door. If the programme won’t start • Check if the plug is connected. • Check your indoor fuses. • Be sure that the water inlet tap is turned on. • Be sure that you have closed the machine door. • Be sure that you switched off the machine by pressing the Power On /

  • Electra C1545B, 11 Water inlet hose Do not use the water inlet hose of your old machine,if any. Use the new water inlet hose supplied with your machine instead. If you are going to connect a new or long - unused water inlet hose to your machine ,run water through it for a while before making the connection. Connect the water inlet hose directly to the water inlet tap. The pressure supplied by the tap should be at a minimum of 0.03 Mpa and and at a maximum of 1 Mpa.If the water pressure is

  • Electra C1545B, 4 Capacity 10 place settings Height 845 mm Height (without worktop) 815 mm Width 450 mm Depth 598 mm Net Weight 40 kg Electricity input 220-240 V, 50 Hz Total Power 1900 W Heating Power 1800 W Pump Power 100 W Drain Pump Power 30 W Water supply pressure 0.03 MPa (0,3 bar)-1 MPa (10 bar) Current 10 A Technical specifications Producer company has its right to amend design and technical specifications reserved.The machine's service life is 10 years (the duration required to keep spare parts for the machine to fulfil its us

  • Electra C1545B, 52160913 R20 THEPRODUCTFICHE Supplier'strademark ELECTRA Supplier'smodel C1ͷͶͷB/S/W Capacityofdishwasher 12 Theenergyefficiencyclass A+ AnnualenergyconsumptioninkWhperyear(AE C )(280Cycle)* 2͵͹ Energyconsumption(E t )(kWhpercycle) Ͳǡͺ͵ Offmodepowerconsumption(W)(P o ) 0,Ͳͷ Leftonmodepowerconsumption(W)(P l ) 1,00 Annualwaterconsumptioninlitresperyear(AW C )(280Cycle)** 3͸ͶͲ Dryingefficiencyclass*** A Standardprogrammename

  • Electra C1545B, D ESCRIPTIONS 25 Programme names and temperatures - 50° C 65° C 70° C Type of food waste then select a programme cold meats, vegetables, not kept for long cold meats, v egetables, not kept for long soups, sauces, pasta, foods - s mall Detergent amount B: 25 cm 3 / 15 cm 3 A: 5 cm 3 - B A+B A+B A+B Dry 70° C Wash 65° C Wash End End 65° C Wash 65° C 50° C Wash 45° C Wash 1 5 30 172 115 130 (kW hours) 0,02 0,7 2 0,83 1,45 1,5 3 ,8 13,0 17,6 Programme No Prewash A+B 50

  • Electra C1545B, 9 Items not suitable for dishwashing: • Cigarette ashes, candle leftovers, polish, paint, chemical substances, iron-alloy materials; • Forks, spoons and knives with wooden or bone, or ivory or nacre-coated handles; glued items,items soiled with abrasive, acidic or base chemicals. • Plastic items that are not heat-resistant, copper or tin-coated containers. • Aluminium and silver objects (they may discolour, become dull). • Certain delicate glass types, porcelains with ornamental printed patterns as they fade

Related Products and Documents (Dishwasher):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 AcraDyne 1000 Series Operation manual acradyne/1000-series-M24.pdf 29 Jun 2023 10
2 Memorex MMP3642A Operation & user’s manual memorex/mmp3642a-94H.pdf 12 Feb 2023 8
3 Therapure TPP201M Owner's manual therapure/tpp201m-99U.pdf 17 Nov 2023 10
4 Omron MICROAir NE-U100 How to clean the device omron/microair-ne-u100-35O.pdf 12 Aug 2023 2
5 Lightmaxx VEGA SPOT 90 Operation & user’s manual lightmaxx/vega-spot-90-JC1.pdf 06 Jul 2023 30
6 Sunbeam 3981 Operation & user’s manual sunbeam/3981-VPW.pdf 30 Jun 2022 24

Similar Resources:

  • Frigidaire

    FDB641RJ

    (13 pages)
    PRODUCT NO. BASE MODEL NO. SERIES COLORFDB641RJB1 FDB641RJ Built-in 24" blackFDB641RJS1 FDB641RJ Built-in 24" whiteMARKETNorth AmericaPublication No.5995353926010523-EN/SERVICE /ECL82124" Built-InDISHWASHERModel No.FDB641RJ©2001 White Consolidated Industries, Inc.All rights reservedFACTORY PARTS CATALOGDISHWASHERSERVICE DATA SHEET # - 1544030 …
  • Classeq

    P500

    (2 pages)
    Turning the warewasher onLoading the warewasher Push the ‘ON’ button, the button will flash amber to indicatepre-heating and water filling of the machine. You can continue to prepare the machine whilst this process occurs.Open the hood to load a basket. Before loading, ensure debris is rinsed from the items. With the basket in place, close thehood. …
  • Electrolux

    ESL 679

    (9 pages)
    GeschirrspülerLave-vaisselleAfwasautomaatDishwasherBEDIENUNGSANLEITUNG - Teil 2 2MODE D’EMPLOI - Partie 2 9GEBRUIKSAANWIJZING - Deel 2 16INSTRUCTION BOOK - Part 2 23Model ESL 679152978 04/0NLFDGB …
  • KitchenAid

    KUDD03DTPA10

    (52 pages)
    I_itchen/kid ®INSTALLATION INSTRUCTIONSDRAWER DISHWASHERINSTRUCCIONES DE INSTALACIONDE LA LAVAVAJILLAS DE CAJONINSTRUCTIONS D'INSTALLATIONLAVE-VAISSELLE A DOUBLE TIROIRTable of Contents/indice/Table des matieres .................................................................. 2iMPORTANT:Save for local electrical inspector's use.Installer: Leave …
  • Amana

    ADB1400AW

    (1 pages)
    24"(61 cm)**34"(86.4 cm)min*4"(10.2 cm)3"(7.6 cm)24"(61 cm)1³⁄₄"(4.4 cm)1³⁄₄"(4.4 cm)Check that all surfaceshave no protrusions that would prevent dishwasher installation.10¹⁄₂"(26.7 cm)2"(5.1 cm)2¹⁄₂"(6.4 cm)6³⁄₄"(17.2 cm)6¹⁄₄"(15.9 cm)Clear Area …
  • Kenmore

    14371

    (20 pages)
    , .ARSOwner'sManualModel Nos.143711437414375Model and SerialNumberPla.tej=)=AUTOMATIC DISHWASHERCAUTION: Read and follow all SafetyRules and Operating Instructionsbefore first use of this product.Sears, Roebuck and Co., Hoffman Estates, iL 60179 U.S.A.165D35j92P061SR5560-1542 CGPrintedin U,S,A. …

Comments, Questions and Opinions: