Manualios.com

Digisol DG-HR3400 Quick Installation Manual

Digisol DG-HR3400 Manual Online:

4.65, 592 votes
Digisol DG-HR3400 User Manual
Digisol DG-HR3400 User Guide
Digisol DG-HR3400 Online Manual

Text of Digisol DG-HR3400 User Guide:

  • Digisol DG-HR3400, 3 The following items should be present in your package  DG-HR3400 Wireless Broadband Home Router  Power adapter (5V DC, 1A)  Rubber feet (4 Nos.)  Quick Installation Guide  Installation Guide CD (includes User Manual, QIG & Utility)  Patch Cord (1 No.) Make sure that the package contains above items. If any of the listed items is damaged or missing, please contact your retailer immediately. Thank you for purchasing DG-HR3400 300Mbps 802.11n Wireless Broadband Home Router! DG-HR3

  • Digisol DG-HR3400, 4  High Internet Access throughput.  Wireless speed up to 300Mbps.  Allows multiple users to share a single Internet line.  Shares a single Cable or xDSL internet connection.  Access private LAN servers from the internet.  Four wired LAN ports (10/100M) and one WAN port (10/100M).  Works with IEEE 802.11b/g/n wireless LAN devices.  Supports DHCP (Server/Client) for easy IP-address setup.  Supports multiple wireless modes like: AP, Client, Wireless Bridge and Universal Repeater.  Advanced network and security features like: Special Applications, QoS, DMZ, Virtual Servers, Access Control, Firewall.  Allow

  • Digisol DG-HR3400, 5 Front View LED Name LED Status Indication Power (PWR) On Router is switched on and correctly powered. On WAN port is connected. Off WAN port is not connected. WAN Blinking WAN activity (transferring or receiving data). On LAN port is connected. Off LAN port is not connected. LAN(1-4) Blinking LAN activity (transferring or receiving data). On Wireless network is switched on. Off Wireless network is switched off. WLAN Blinking Wireless LAN activity (transferring or receiving data). On A wireless device has been successfully added to the network by WPS function. Off WPS process is

  • Digisol DG-HR3400, 6 Rear View Interfaces Description Antennas These antennas are 5dBi dipole antennas. Power on/off button Press this button to power on/off the router. Power The Power socket is where you will connect the power adapter. Please use the power adapter provided with this Wireless Router. LAN (1 – 4) Local Area Network (LAN) ports 1 to 4. WPS/WIFI The WPS/WIFI button has two functions. WPS: Press this button for more than 5 seconds to initiate WPS. WIFI: Press this button for less than 5 seconds to enable WLAN. Reset Reset the router to factory default settings (

  • Digisol DG-HR3400, 7 Hardware Installation Please follow the below mentioned instructions to build the network connection between your new WIRELESS router and your computers, network devices: 1. Connect your xDSL / cable modem to the WAN port of the router by an Ethernet cable. 2. Connect all your computers, network devices (switch / hub) to the LAN port of the router.

  • Digisol DG-HR3400, 8 3. Connect the power adapter (5V DC / 1A) to the wall socket, and then connect it to the ‘Power’ socket of the router. 4. Please check all LEDs on the front panel. Power LED ‘PWR’ should be steadily ON, WAN and LAN LEDs should be ON. Check if the computer/network device connected to the respective port of the router is powered ON and correctly connected. If power LED ‘PWR’ is not ON, or any LED you expected is not ON, please recheck the cabling.

  • 9 Software Installation  Insert the Setup CD into your CD-ROM drive of notebook/desktop computer.  Explore the CD and execute the “AutoRun.exe” file. Below given screen will appear. Click 'Start' to Continue.

  • Digisol DG-HR3400, 10  Connect one end of a network cable to the WAN port of the router and the other end to the DSL/Cable modem. Click ‘Next’ to continue.  Connect one end of the provided network cable to one of the LAN ports (1~4) of the router and the other end to your computer. Click ‘Next’ to continue with the installation.

  • Digisol DG-HR3400, 11  Power on the Router. It will take approximately 30 seconds for the router to boot up completely. Click ‘Next’ to continue with the installation.  Ensure the normal indication of all LED’s on the router. If not, try the above steps again else click ‘Next’ to continue.

  • Digisol DG-HR3400, 12  Enter the Router’s password to log in to the Router. The default password is “1234”. It is recommended to change the router’s password to protect it from being accessed by other users. If you do not wish to change the current password, you can leave “New Password” and “Confirm New Password” fields blank. Click ‘Enter’ to continue.  Please select the internet connection type. Click ‘Next’ to continue.

  • Digisol DG-HR3400, 13 PPPoE (DSL users)  Choose PPPoE. (Point to Point Protocol over Ethernet) If your ISP uses a PPPoE connection you will be provided with a username and password. This option is typically used for DSL services.  Once the user name and password is entered click on ‘Next’, the screen shown below will appear. Click on ‘Next’.

  • Digisol DG-HR3400, 14  Enter the ‘SSID’ and click on ‘Next’.  Configure the wireless security. Enter the security mode i.e. either ‘None’ or ‘WPA2 Mixed’ and click on ‘Next’.

  • Digisol DG-HR3400, 16 DHCP (Cable Modem users)  Select DHCP Client to obtain IP Address information automatically from your ISP. Click on ‘Next’.  The screen shown below will appear. Click on ‘Next’.

  • 18  Configure the wireless security. Enter the security mode i.e. either ‘None’ or ‘WPA2 Mixed’ and click on ‘Next’.  Following screen will appear. Click on ‘Finish’.

  • 19  Lastly, the router will reboot as shown below. Static IP (Cable Modem users)  Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address and DNS address provided to you by your ISP. Each IP address entered in the f

  • 21  Configure the wireless security. Enter the security mode i.e. either ‘None’ or ‘WPA2 Mixed’ and click on ‘Next’.  You can view the information about the wireless configuration in the next screen. Click ‘Finish’ to save your current settings and reboot the router.

  • Digisol DG-HR3400, 22 Web Management Connecting the router’s management interface by web browser: After you assign an IP address to the computer, open the web browser, and type the IP address of the router in the address bar as ‘http://192.168.2.1’. The following message will be shown: Please input user name and password in the field respectively, default user name is ‘admin’, and default password is ‘1234’, then press ‘Login’ button, and you can see the web management interface of this router:

  • Digisol DG-HR3400, 23 Following are the solutions to problems that may occur during the installation and operation of the Digisol DG-HR3400 Router. 1. Router cannot get connected to internet.  Access the router’s web configuration and go to ‘status’->’Internet Connection’ menu and verify internet connection status.  If you were previously able to connect a computer to internet directly, try to do that again, and verify whether you can access internet with your computer directly attached to the device provided by your internet service provider.  Check PPPoE user ID and password again.  Call your internet service provider

More Instructions:

DOWNLOAD

Related Products and Documents (Wireless Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Kuzma Stabi S Instruction manual kuzma/stabi-s-PX6.pdf 12 Aug 2023 10
2 Sony CLP-NWA800 Operating instructions sony/clp-nwa800-6D7.pdf 16 Dec 2022 1 0.11 Mb
3 Xerox XM7-19w Operation & user’s manual xerox/xm7-19w-22Z.pdf 13 Aug 2023 33 1.11 Mb
4 Mitsubishi SL-Series Operation manual mitsubishi/sl-series-K12.pdf 03 Dec 2022 44
5 LG AX155 Quick start manual lg/ax155-X81.pdf 24 Oct 2023 6
6 Samsung MAX-DS9750 Instruction manual samsung/max-ds9750-OH4.pdf 12 Nov 2023 32 8.24 Mb

Similar Resources:

  • NETGEAR

    Orbi RBK53

    (2 pages)
    INTERNET INTERNET1. Connect Your Orbi Routera. Unplug your modem, remove and replace the backup battery if it uses one, and plug the modem back in.b. Place your Orbi router. We recommend that you place your Orbi router in the middle of your house.c. Use the included Ethernet cable to connect your modem to the yellow Internet port on your Orbi router.Note: …
  • NETGEAR

    Orbi RBS50

    (2 pages)
    1. Connect Your Orbi RouterIf you already connected your Orbi router, skip this step.2. Place Your Orbi SatelliteIf this is the first Orbi satellite you are adding to your Orbi network, follow these steps:Place your Orbi satellite in the middle of your house to get the best WiFi coverage.Connect the Orbi satellite to a power source. The Power LED on the bac …
  • Kyocera

    KR2 - Mobile Router Wireless

    (2 pages)
    WELCOMEWelcome to your Kyocera KR2 Mobile Router(KR2)! Now you can create a WiFi® hotspot, and make your network completely mobile using a EVDO enabled cellular handset or modem, or a 1xEV-DO Express Card or PC Card. A cable/DSL modem can also be used while stationary. FeaturesSystem RequirementsGetting to Know Your KR2 LEDs (Front View)Connections and Cont …
  • Dynalink

    RTA 1046VW ADSL1

    (5 pages)
    Netbay Internet – RTA1046VW ADSL/ADSL2+ setup guide Last updated: Page 1 of 5 28 Aug 2009 Ben L & Kein C Dynalink RTA 1046VW ADSL1/ADSL2+ setup guide 1. Start your browser (Internet Explorer, Mozilla Firefox, Google Chrome etc). 2. In the address bar, type in 192.168.1.1 and press “Enter” 3. WebAdmin login screen: You will be prompted t …
  • Conceptronic

    C100BRS4H

    (121 pages)
    NEDERLANDS 1Conceptronic C100BRS4H Snelstart handleiding Hartelijk gefeliciteerd met de aanschaf van uw Conceptronic Broadband router. In de bijgaande Snelstart handleiding wordt stap voor stap uitgelegd hoe u de Conceptronic Broadband Router installeert. Ingeval van problemen adviseren wij u onze support-site te bezoeken (ga naar: www.conceptronic.ne …
  • Draytek

    Vigor2130 Series

    (2 pages)
    www.draytek.net.nz www.snappernet.co.nz Vigor2130 » Quick Start Guide Configure your computer’s network Connect your computer to the Vigor2130 with an Ethernet cable (supplied). Ensure your computer is obtaining an IP address automatically. Connect to the Web Interface Open your Web Browser (e.g. Internet Explorer, Google Chrome or Mozilla Firefox), e …

Comments, Questions and Opinions: