Emax Nighthawk Pro Instruction Manual
|
Emax Nighthawk Pro, Nighthawk Pro www.emaxmodel.com 2 Thanks for purchased Nighthawk Pro. Please follow the instruction manual to install and configure your Nighthawk Pro. This instruction manual needs to complement with configuration software user instruction to configure Nighthawk Pro. Please refer to this link to learn more. “http://www.yinyanmodel.com/en/DownList.asp” Index Index ........................................................................................................................................
Emax Nighthawk Pro, Nighthawk Pro www.emaxmodel.com 3 controller, to satisfy the constant update and upgrade with FPV enthusiasts' need. Please read the instruction manual and warnings carefully, make sure battery charged and power connections are good during flights. Do NOT fly around crowds, children, animals or objects. Emax accepts no liability for damage(s) or injuries incurred directly or indirectly from the use of this product. Warnings 1、Please following the instruction manual to install and operate Nighthawk Pro 2、Do NOT use Nighthawk Pro while drunk, taking dru
Emax Nighthawk Pro, Nighthawk Pro www.emaxmodel.com 4 Specifications In the Box 1. User Manual 2. Nighthawk Pro RTF Assembly drawing ARF Assembly drawing Model Size & Weight ARF RTF Package(L*W*H) 310*300*100(mm) 470*300*100(mm) Nighthawk (L*W*H) 252mm*260mm*75mm 252mm*260mm*75mm Weight(g) Outer packing box: 295g, Inner holder: 180g Outer packing box: 445g, inner holder: 240g Flight weight (g) 440g (Not included Battery) 450g(Not included Battery)
Emax Nighthawk Pro, Nighthawk Pro www.emaxmodel.com 5 3. Accessories Accessories ARF and RTF both included Accessories Type Accessories Name QTY A、Propeller CW Propellers 2PCS CCW Propellers 2PCS B、Battery & wire accessories Battery accessories Battery Strap 1PC Velcro 1PC Receiver wire accessories Receiver wire mesh (ARF preassembled) 1PC C、 Chassis Accessories 8Pin PVC Connector (ARF preassembled) 1PC 6 Pin PVC Connector 1PC 5 Pin PVC Connector 1PC 2Pin PVC Connector (Red & Brown) 1PC 2Pin PVC Connector (Orange & Red) 1PC D、Video
Emax Nighthawk Pro, Nighthawk Pro www.emaxmodel.com 6 Required Tools and Equipments 1、Battery with XT60 connector (Suggested battery size: 3-4S 1300-1800mah 35C) For fly safety and main board power range, suggest propellers 5-6inches under 3S and propellers 5inches under 4S. 2、1.5MM, 2.0MM, 2.5MM hex driver, tweezers, needle nose pliers, scissors, etc... 3、Computer or Laptop 4、Monitor and/or goggles. 5、Transmitter (ARF model ONLY) Installation Steps Step 1 Preparation Take out the frame from the package and put it on a horizontal
Nighthawk Pro www.emaxmodel.com 7 Step 3 Receiver Connection Receiver and Flight Controller Connection (ARF model ONLY) Receiver 8Pin Cable RC Input Connector Step 4 How to use Baseflight Configurator Only Baseflight Configurator will be discuss below. If c
Emax Nighthawk Pro, Nighthawk Pro www.emaxmodel.com 8 Please select "SETUP" ①Calibrate Accelerometer ②Calibrate Magnetometer (1)Calibrate Accelerometer: Place board or frame on leveled surface, then select "Calibrate Accelerometer", once the accelerometer calibration is complete, date will be save automatically. Note: Starting or ending accelerometer calibration will be shown in the message display. (Make sure not to move the board or frame during calibration) (2)Calibrate Magnetometer: Select "Calibrate Magnetometer", make sure to rotate the board or fra
Emax Nighthawk Pro, Nighthawk Pro www.emaxmodel.com 9 Mode Selections (1)Please select "Mode Selection ①Modes: ARM, ANGLE, HORIZON, MAG, HEADFREE, HEADADJ, BEEPER, OSD SW, etc... Some modes will not appear unless sensor is connected. Ex: If barometer is not connected to the flight controller, the altitude mode will not display in the list. ②AUX Channel Select for Modes. (2)AUX Channel for Modes: Select desired AUX channel for mode, then check the box and save the setting by click the "SAVE" at right bottom corner. When
Emax Nighthawk Pro, Nighthawk Pro www.emaxmodel.com 10 (8)Move throttle stick up (9)Use transmitter stick to control pitch, roll and yaw, observe the motor power bar under "Motor Testing". Make sure the motor power bar is change according to transmitter stick. (10)Test motor direction: Use a piece of paper to touch the motor to check the motor direction (Motor direction should be the same as figure shown below) Please be careful and only move the motor little by little while checking motor direction. Step 5 Ins
Emax Nighthawk Pro, Nighthawk Pro www.emaxmodel.com 11 Fig 1 Fig 2 Fig 3 Fig 4 Fig 5 Video Transmitter Channel Video transmitter channel switches are located at the bottom and rear of the copter, channel can be change to corresponding channel to monitor and/or goggle. 20mw/200mw power switch is located at the side of FPV. Switching to copter head is 20mw and to tail is 200mw. The default is 20mw.
Emax Nighthawk Pro, Nighthawk Pro www.emaxmodel.com 12 motors. (Please refer to Appendix - Self checking light status) Note: Please test the distance between radio and video transmitter before testing to make sure the actual distance between radio and video transmitter in your flight aera, for the electromagnetism will influence the distance between radio and video transmitter. Step 7 Upgrade Accessories Installation Inclined Camera Mounting Plate Installation (1)Place camera to inclined camera mounting plate (2)Use M2.3X6.5mm self tap screw to secure the camera (3)Remove top board (4)Insert camera with inclined mounting p
Emax Nighthawk Pro, Nighthawk Pro www.emaxmodel.com 13 Inclined Motor Mounting Base (1)Install motor to inclined motor mounting base. (Please install the M1-M4 motor to the corresponding position, M1-M4 is indicated at the motor base) (2)Use M3x7mm steel screws to secure the motors (3)Install inclined motor mounting plate to the motor arm plate. (4)Use M2.5x8mm stainless steel screw to secure After installation completed, all motors should be inclined to the same angle. If
Emax Nighthawk Pro, Nighthawk Pro www.emaxmodel.com 15 ①Power Input. Support 2-4S Lipo battery (To ensure flight safety, use 5-6inches propellers for 3S battery and 5 inches propellers for 4S battery). ②Power Output. Supply external power for LED, Video TX, etc.. ③Power Output Switch. Control power output and output voltage is the same as input voltage (Default set to OFF) ④FPV Camera Connector. Please use filter to reduce video signal noise when power and signal are connected.
Emax Nighthawk Pro, Nighthawk Pro www.emaxmodel.com 16 Frequently Asked Questions ①After power, flight controller indictor not lit on, but ESC indicator lit, please check if ESC switch is switch to ON ② After connected micro USB to computer and flight controller, if the flight controller LED light are not on, please check if the computer has installed the driver, check ESC SWITCH is switched to ON position and check if micro USB connection. ③If copter motor sound“beep-、beep-、be
Emax Nighthawk Pro, Nighthawk Pro www.emaxmodel.com 17 ③Calibrate M2 ESC: Since M2 connector have no BEC, connect M2 connector directly into THR on receiver and connect M1 connector into other channels to supply power for receiver. Connector and Receiver connection see below: Receiver 6Pin cable ESC calibration port ④Calibrate M3 and M4 ESC: Same as Calibrate M2 ESC (instead of M2 use M3 and M4) Buzzer To ensure buzzer to sound
Wingsland S6 Quadcopters Quick start manual
S6 |
Emax Babyhawk Race Quadcopters Operation & user’s manual
Babyhawk Race |
dji Matrice 100 Quadcopters Operation & user’s manual
Matrice 100 |
Wingsland Minivet Quadcopters Operation & user’s manual
Minivet |
Protocol Dronium Two AP Quadcopters Instruction manual
Dronium Two AP |
Kaiser Baas DELTA DRONE Quadcopters Checklist
DELTA DRONE |
MJX X906T Quadcopters Instruction manual
X906T |
Parrot Mambo Quadcopters Quick start manual
Mambo |
# | Manufacturer | Model | Document Type | File | Updated | Pages | Size |
---|---|---|---|---|---|---|---|
1 | Optoma | DS325 | Brochure & specs | optoma/ds325-845.pdf | 15 Sep 2023 | 6 | |
2 | HP | StorageWorks 2/16-EL | Quickspecs | hp/storageworks-2-16-el-5D5.pdf | 22 Nov 2023 | 11 | |
3 | Clarity | C200 | Operation & user’s manual | clarity/c200-R39.pdf | 15 Oct 2023 | 2 | 0.28 Mb |
4 | Moulinex | Spiralio | Operation & user’s manual | moulinex/spiralio-714.pdf | 26 Jan 2024 | 25 | |
5 | Casio | PCR T48S - Cash Register | Service manual | casio/pcr-t48s-cash-register-G3R.pdf | 12 Mar 2023 | 4 | 1.32 Mb |
6 | ATC Group | Counter Top Cooler CT 100P | Specification sheet | atc-group/counter-top-cooler-ct-100p-54L.pdf | 01 Oct 2023 | 1 | 0.2 Mb |
Xaircraft
XAircraft X650 Value安装说明书INSTRUCTION MANUAL在使用XAircraft X650 Value之前,请仔细阅读此说明书。Read the manual carefully before using XAircraft X650 Value.2011-07 V1.1Model: X650 V-4
…
X650 Value(21 pages) |
REVELL
V 01.043SPEEDLEVELHEADLESSMODE23860www.revell-control.de© 2017 Revell GmbH, Henschelstr. 20-30, D-32257 Bünde. A subsidiary of Hobbico, Inc. REVELL IS THE REGISTERED TRADEMARK OF REVELL GMBH, GERMANY. Made in China.8+INHALTTABLE OF CONTENTSCONTENU INHOUD CONTENIDO CONTENUTO ERSATZTEILE / REPLACING SPARE PARTS / PIÈCES DÉTACHÉES / RESERVEONDERDELEN / P …
Control AIR HUNTER(2 pages) |
WLtoys
Mays QUADROCOPT ER SEEKER Quick Start Manual Propeller hoop )11 Motor-an Front direction at di* Landing skid V303 Front indicator light (Blue light) Propeller Front indicator light (White light) Cover of the battery compartment Mays QUADROCOPT ER SEEKER Quick Start Manual V303 Propeller hoop )11 at Motor Front indicator light (Blue light) Cover …
V303(6 pages) |
Air Hogs
4 1a WARNING: IF ROTOR(S) BECOME DAMAGED OR BROKEN, DO NOT FLY. FLYING WITH BROKEN ROTOR(S) MAY CAUSE DAMAGE OR LEAD TO INJURY. a ATTENTION ! NE PAS UTILISER LE JOUET SI L'UNE DES HÉLICES EST ABÎMÉE OU CASSÉE ; CELA PEUT CAUSER DES DÉGÂTS OU ENTRAÎNER DES BLESSURES. 8+YRSANSHelix Race™TMa WARNING: CHOKING HAZARD – Small parts.Not for childr …
HELIX RACE(2 pages) |
Vivanco
PÕHJUS: Aku või patarei on tühiVõõrkehad blokeerivad propellereidLAHENDUS:Lülitage juhtpult asendisse "ON"Laadige aku/vahetage patareiEemaldage võõrkehadLüliti on asendis "OFF"Patareid on valesti paigaldatudPatareid on tühjadLülitage asendisse "ON"Paigaldage õigestiVahetage patareisidAku laeng on nõrkLükake vasakut …
DRONECAMVVM(1 pages) |
Blade
ChargingBalancingChargingcompletePowerconnectedCharger LED codesCharge the Flight Battery (~75 min) Install the propellersPower Up1 2673458 910 11CAUTION: All instructions and warnings must be followed exactly. Mishandling of Li-Po batteries can result in a re, personal injury and/or property damage.16 ft(5 m)FrontPilot locationHome positionPlacement at …
CHROMA(2 pages) |
Panasonic Desktop CF-E1MPanasonic Desktop Operating instructions manual (File: panasonic-cf-e1m-operation-user-s-manual-64, 12/08/2023) CF-E1M, 64 |
Ringway Musical Instrument RS400Manual: Ringway RS400 (7KNQ8E, Upd.24/09/2023) RS400, 64 |
BMW Other G 450 XBMW G 450 X Manual (Brochure), @T845K4 G 450 X, 9 |
PHCC Pond Pumps Pro S3 SeriesPHCC Pro S3 Series User Manual (Doc Type: Pond Pumps Instruction manual & safety warnings) Pro S3 Series, 4 |
Response Alarms Security System RE5000SSecurity System Installation & operating handbook (Response Alarms RE5000S) RE5000S, 34 |
Omnitron Systems Technology Switch 12/08#6Y46SQ 12/08: Omnitron Systems Technology Switch Owner Documentation 12/08, 2 |
Carmen Hair Dryer CR4275Manual for Carmen CR4275 Hair Dryer CR4275, 36 |
Goobay Media Converter CONVERTER USB TO PRINTERGuide: Goobay CONVERTER USB TO PRINTER (8V785L, Upd.29.09.2023) CONVERTER USB TO PRINTER, 2 |
Seago Security Sensors Premium Stainless Steel Liftraft CradleSeago Premium Stainless Steel Liftraft Cradle User Manual (Doc Type: Security Sensors Quick start manual) Premium Stainless Steel Liftraft Cradle, 4 |
Aeon Labs Measuring Instruments AeotecMeasuring Instruments Manual (Aeon Labs Aeotec) Aeotec, 9 |
EchoStar Satellite TV System DISH ProDISH Pro (Satellite TV System ePDF User Manual, #ZE2DTI) DISH Pro, 178 |
Allen-Bradley Adapter PowerFlex RS-485 DF1Adapter Operation & user’s manual (Allen-Bradley PowerFlex RS-485 DF1) PowerFlex RS-485 DF1, 63 |