Manualios.com

ChipER Technology HLC-84BD/P Operation & User’s Manual

ChipER Technology HLC-84BD/P Manual Online:

3.3, 2353 votes
ChipER Technology HLC-84BD/P User Manual
ChipER Technology HLC-84BD/P User Guide
ChipER Technology HLC-84BD/P Online Manual

Text of ChipER Technology HLC-84BD/P User Guide:

  • ChipER Technology HLC-84BD/P, 45/46 VII. Factory Default i、 To recover the default IP address and password, please follow the following steps. ii、 Remove power, and press and hold the button in the back of IP CAMERA. iii、 Power on the camera. Don’t release the button during the system booting. iv、 It will take around 30 seconds to boot the camera. v、 Release the button when camera finishes proceed. vi、 Re-login the camera using the default IP (http://192.168.1.200), and user name (admin), password (adm

  • 28/46 b. Camddns service: 1. Please enable this service 2. Key-in user name. 3. IP Schedule update is default at 5 minutes 4. Click “Apply”. c. DDNS Status 1. Updating:Information update 2. Idle:Stop service 3. DDNS registration successful, can now log by http

  • ChipER Technology HLC-84BD/P, 27/46 Key-in Username and password for the ADSL connection. Send mail after dialed:When connect to the internet, it will send a mail to a specific mail account. For the mail setting, please refer to “Mail and FTP” settings. iv、 DDNS: It supports DDNS (Dynamic DNS) service. a. DynDNS: 1. Enable this service 2. Key-in the DynDNS server name, user name, and password. 3. Set up the IP Schedule update refreshing rate. 4. Click “Apply” 5. If setting up IP schedule update too frequently, the IP may be blocked. In general, schedule update

  • ChipER Technology HLC-84BD/P, 30/46 a. Status of Wireless Networks; scan all wireless services. b. Wireless Setting: 1. Mode:There are Infrastructure and Ad-hoc. Infrastructure is for connecting with the router. Ad-hoc is for connecting with PC. There is “Channel” to select only when user uses Ad-hoc mode. 2. SSID:Based on AP setting. 3. Channel:This is only be used when the user selects Ad-hoc mode in order to avoid conflict. 4. Security:It supports “None”, “WEP”, “WPA-PSK” security encryption based on th

  • ChipER Technology HLC-84BD/P, 14/46 IV. Live Video Start a IE browser, type the IP address of the IP camera in the address field. It will show the following dialogue box. Key-in the user name and password. The default user name and password are “admin” and “admin”. When connect to the IP CAMERA。The following program interface shows. 1 2 3 4 5 6 7

  • ChipER Technology HLC-84BD/P, 11/46 click “Search Device” to search again. viii. Click one of the IP Camera listed on the left side. The network configuration of this IP camera will show on the right side. You may change the “name” of the IP Camera to your preference (eg: Office, warehouse). Change the parameter and click “Submit” then click “OK”. It will apply the change and reboot the Device. ix. Please make sure the subnet of PC IP address and IP CAM IP address are the same.

  • ChipER Technology HLC-84BD/P, 44/46 iii、 Configuration 3: a. Internet Access:ADSL or Cable Modem b. IP address:one real IP or one dynamic IP c. IP CAMERA and PC connect to the internet d. Device needed:IP sharing e. Use virtual IP, set up port forwarding in IP sharing.

  • 20/46 B.Network i、 IP Setting IP Camera supports DHCP and static IP. a. DHCP:Using DHCP, IP Camera will get all the network parameters automatically. b. Static IP:Please type in IP address, subnet mask, gateway, and DNS manually. c. Port Assignment: user may need to assign different

  • ChipER Technology HLC-84BD/P, 4/46 I. Preface This is a 1/2.7’’ 2M CMOS IP camera with the web server built in. User can view real-time video via IE browser. It supports H.264, JPEG and MPEG4 video compression which provides smooth and high video quality. The video can be stored in the Micro SD card and playback remotely. With user friendly interface, it is an easy-to-use IP camera which is designed for security application. II. Product Specifications  1/2.7” 2M CMOS Sensor  Digital Noise Reduction  Digital W

  • ChipER Technology HLC-84BD/P, 31/46  Authentication:There are Open System and Shared Keys, it is based on different encryptions. This has to be the same as the Router’s setting.  Encryption:The length of key is decided here. In the 64bit encryption, the HEX key should include 10 characters while ASCII key includes 5 characters. In the 128bit encryption, the HEX key should include 26 characters while ASCII key includes 13 characters.  Key Type:There are HEX and ASCII. When HEX is

  • 17/46 A.System i、 System Information a. Server Information: Set up the camera name, select language, and set up the camera time. 1. Server Name:This is the Camera name. This name will show on the IP Installer. 2. Select language:There are English, Traditional Chinese, and Simplified

  • ChipER Technology HLC-84BD/P, 2/46 WARINGS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. COPYRIGHT THE TRADEMARKS MENTIONED IN THE MANUAL ARE LEGALLY REGI

  • ChipER Technology HLC-84BD/P, 46/46 IX. Micro SD Card The following is the Micro SD Card recommended: Transcend SDHC class4 16GB SDHC class4 32GB SD class4 16GB SD class4 32GB SDHC class6 4GB SDHC class6 8GB SDHC class6 16GB SD class6 4GB SD class6 8GB SD class6 16GB SDHC class10 4GB SDHC class10 8GB SDHC class10 16GB SanDisk SDHC class4 4GB SDHC class4 8GB SDHC class4 16GB SDHC class4 32GB

  • 15/46 1. :Get into the administration page 2. :Video Snapshot 3. Show system time, video resolution, and video refreshing rate 4. Select video streaming source (When streaming 2 setting in『Video Setting』 is closed, this function will not display) 5. IP Camera supports 2-wa

  • ChipER Technology HLC-84BD/P, 29/46 v、 Server Setting There are three choices of server types available: Email, FTP and SAMBA. Select the item to display the detailed configuration options. You can configure either one or all of them. vi、 Wireless Setting (Wireless Network Optional) Supports 802.11 b/g wireless connection. Notice:Wireless network and Ethernet network use the same IP, the user has to unplug Ethernet cable, if Ethernet cable is not unplug, wireless setting can not be executed.

  • 32/46 C.A/V Setting i、 Image Setting For the security purpose, there are three areas can be setup for privacy mask. Click Area button first and pull an area on the above image. Finally, click Save button to reserve the setting. Please refer to the details below for Image setting: a. Brightness, Con

  • ChipER Technology HLC-84BD/P, 41/46 d. The relay out can be switch on and off on the live video page. iv、 Log List Sort by System Logs, Motion Detection Logs and I/O Logs. In addition, System Logs and I/O Logs won’t lose data due to power failure.

  • ChipER Technology HLC-84BD/P, 38/46 D.Event List IP CAMERA provides multiple event settings. i、 Event Setting a. Motion Detection: IP CAMERA allows 3 areas motion detection. When motion is triggered, it can send the video to some specific mail addresses, transmit the video to remote ftp server, trigger the relay, and save video to local Micro SD card. To set up the motion area, click “Area Setting”. Using mouse to drag and draw the area. The same operation for area 2 and 3. b. Record File Setting: IP CAMERA allows 3 different types of recording file to change its record size.

  • 36/46 3. Video Frame Rate:The video refreshing rate per second. 4. Video Format:H.264, MPEG4 or M-JPEG 5. RTSP Path: RTSP output connecting route e. 3GPP Streaming mode: 3GPP mode suggested setting: 176x144 resolution, 5FPS, MPEG4 format 1. Enable or Disable 3GPP Streaming 2. 3GPP: 3G

  • ChipER Technology HLC-84BD/P, 35/46 c. Streaming 2 Basic Mode: 1. Resolution: There are 5 resolutions can be chosen. 1920x1080, 1280x720, 640x480, 320x240, 176x144 2. Quality: There are 5 levels to adjust: Best/ High/ Standard/ Medium/ Low The higher the quality is, the bigger the file size is. Also not good for internet transmitting 3. Video Frame Rate:The video refreshing rate per second. 4. Video Format:H.264, MPEG4 or M-JPEG 5. RTSP Path: RTSP output connecting route d. Streaming

  • ChipER Technology HLC-84BD/P, 22/46 Multicast is a bandwidth conservation technology. This function allow several user to share the same packet sent from IP camera. To use Multicast, appoint IP Address and port here. TTL means the life time of packet, The larger the value is, the more user can receive the packet. To use Multicast, be sure to enable the function "Receive Multicast" in your media player. g. ONVIF Choose your ONVIF version a

  • ChipER Technology HLC-84BD/P, 43/46 VI. Network Configuration i、 Configuration 1: a. Internet Access:ADSL or Cable Modem b. IP address:One real IP or one dynamic IP c. Only IP CAMERA connects to the internet d. For fixed real IP, set up the IP into IP CAMERA. For dynamic IP, start PPPoE. ii、 Configuration 2: a. Internet Access:ADSL or Cable Modem b. IP address:More than one real IP or one dynamic IP c. IP CAMERA and PC connect to the internet d. Device needed:Switch Hub e. For fixed real IP, set up the IP into IP CAMERA and PC. For dynamic IP, start PPPoE.

  • ChipER Technology HLC-84BD/P, 21/46 d. UPnP This IP camera supports UPnP, If this service is enabled on your computer, the camera will automatically be detected and a new icon will be added to “My Network Places.” Note: UPnP must be enabled on your computer. Please follow the procedure to activate UPnP 1. open the Control Panel from the Start Menu 2. select Add/Remove Programs 3. Select Add/Remove Windows Components and open Networking Services section 4. Click Details and select UPnP to setup the service 5. The IP device icon will be a

  • ChipER Technology HLC-84BD/P, 40/46 be recorded according to the schedule setup. b. Snapshot: After enable the snapshot function, user can select the storage position of snapshot file, the interval time of snapshot and the reserved file name of snapshot. c. Interval: The interval between two snapshots. iii、 I/O Setting a. Input Setting: IP Camera supports input and output. When the input condition is triggered, it can send the video to some specific mail ad

  • ChipER Technology HLC-84BD/P, 26/46 Please check what version of the authenticator and authentication server support. This camera supports EAP-TLS method. Please enter ID, passwoard issued by the CA, then upload related certificates. iii、 PPPoE: Select “Enabled” to use PPPoE.

Related Products and Documents (IP Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 RCA P46733 Owner's manual rca/p46733-S3L.pdf 03 Aug 2023 84 3.07 Mb
2 American DJ RotoPod User instructions american-dj/rotopod-T36.pdf 26 May 2023 4 0.76 Mb
3 Samsung DA68-01453B Owner's manual and installation instructions samsung/da68-01453b-XP2.pdf 08 Jan 2023 38 3.78 Mb
4 AUDIO TELEX 5085 Datasheet audio-telex/5085-8A4.pdf 25 Oct 2022 1 0.42 Mb
5 HP LCS60 Installation manual hp/lcs60-8U7.pdf 30 Dec 2022 432
6 Miele KFN 37682 iD Operating and installation instructions miele/kfn-37682-id-BXN.pdf 12 Mar 2024 104

Similar Resources:

  • FLIR

    CM-6206-H1-I

    (2 pages)
    Quick Install GuideQuasar Gen II CM-6206-H1-I6MP Mini-Hemispheric IP Camera A. Connect the Camera 1. Attach the Audio cables to an external device.2. If not using poE, attach the power wires to anoptional 12VDC power supply.3. Attach the four Alarm wires to an external device.4. Attach the Ground lug to a ground source.5. Attach the RJ45 connector to the net …
  • Grandstream Networks

    GXV3610_HD

    (47 pages)
    126 Brookline Avenue, 3rd FLBoston, MA 02215, USATel : +1 (617) 566 – 9300 Fax: +1 (617) 247 – 1987 For Warranty and RMA information, please visit www.grandstream.comGXV3610_HD/FHDQuick Start GuideGrandstream Networks, Inc. 深圳市南山高新科技园中区 科发路2号1栋(朗峰大厦)5楼 电话: +86 755-2601-4600 传真: +86 755-2601-4601 …
  • Hi Sharp

    CT7101

    (13 pages)
    Thank you for purchasing our product. Please read this User’s Manual before using the product. Change without Notice Long Distance Viewing Smart Shift IR Camera …
  • DSE

    RH Series

    (12 pages)
    ANPR. MANUAL RH SERIES - PLATE READING IP CAMERAS Page:1 DSE SRL - ITALY - WWW.DSE.EU IP ANPR cameras with OCR How to install license plate reading cameras …
  • D-Link

    DCS-930L

    (80 pages)
    WI-FI DAY CAMERADCS-930LQUICK INSTALLATION GUIDEINSTALLATIONSANLEITUNGGUIDE D’INSTALLATIONGUÍA DE INSTALACIÓNGUIDA DI INSTALLAZIONEINSTALLATIEHANDLEIDINGINSTRUKCJA INSTALACJIINSTALAČNÍ PŘÍRUČKATELEPÍTÉSI SEGÉDLETINSTALLASJONSVEILEDNINGINSTALLATIONSVEJLEDNINGASENNUSOPASINSTALLATIONSGUIDEGUIA DE INSTALAÇÃOΟΔΗΓΟΣ ΓΡΗΓΟΡΗΣ ΕΓ� …
  • Digimerge

    DPV24DL

    (2 pages)
    digimerge.comUltra Resolution Smart-IR Varifocal Vandal Dome CameraDPV24DL❖❖ Sony❖Super❖HAD™❖II/600TVL❖❖ Smart-IR❖Night❖Vision❖(80ft/24m)❖❖ 2.8-10.5mm❖Auto❖Iris❖D/N❖Varifocal❖Lens❖❖ IP66❖Weatherproof❖and❖Vandal-proof❖❖ Shadow❖Reduction❖❖ Advanced❖Digital❖Noise❖Reduction❖(DNR)❖❖ Privacy❖Mas …

IP Camera Instructions:

Comments, Questions and Opinions: