Manualios.com

Cisco Linksys SPA 2102 Operation & User’s Manual

Cisco Linksys SPA 2102 Manual Online:

3.95, 1052 votes
Cisco Linksys SPA 2102 User Manual
Cisco Linksys SPA 2102 User Guide
Cisco Linksys SPA 2102 Online Manual

Text of Cisco Linksys SPA 2102 User Guide:

  • 2 www.joip.com Home Phone Adapter 1. Introduction ........................................................................................................................................................ 3 2. Signup ........................................................................................................................................................

  • Cisco Linksys SPA 2102, 3 www.joip.com 1. Introduction What is the joip Home phone service? The joip Home phone service allows you to make calls through your Home internet connection, saving you up to 70% on your phone bill. Internet Phone to Phone service works just like your regular phone and provides you with the best VoIP services. Simply Signup, Receive your phone adaptor and connect it to your internet connection and home phone. With joip Home phone, you can also take your account and number with you: receive and make calls from your Home phone, Mobile phone, PC or Table

  • Cisco Linksys SPA 2102, 4 www.joip.com 2. Signup 1. Visit our website and choose the calling plan you prefer. 2. Fill out the signup form and click ‘Continue’. The ‘Registered phone number’ will link your phone to the app and function as your Caller ID when using the app

  • Cisco Linksys SPA 2102, 5 www.joip.com 3. Review the summary and click ‘Confirm’. Note that before confirming your signup is not yet completed. 4. Wait for the confirmation page. Please check your mailbox for our confirmation email containing your account details (8-digit User ID and the 4-digit password you have chosen). It may take up to 30 minutes for the email to arrive.

  • Cisco Linksys SPA 2102, 6 www.joip.com 3. Using the Linksys Phone Adapter as an ATA Configuration 1- If you use a broadband modem (ADSL modem or cable modem) IMPORTANT NOTE: Your Linksys Phone Adapter is pre-configured as a DHCP client for use with your home router. If your router is not configured to support DHCP, please contact Customer Care at http://joip.custhelp.com/ for further assistance. Standard Home Router Linksys Phone Adapter ADSL or Cable Modem ` PC Ethernet cable provided in the package Internet INSTALLATION: Step I: Connect your Link

  • Cisco Linksys SPA 2102, 7 www.joip.com Step II: Start making and receiving IP phone calls 1. Wait for the “POWER”, and “PHONE 1” LEDs on the Linksys to stop blinking. It should only take a few minutes. Once the LEDs are solidly lit, pick up the telephone receiver and verify that you hear a dial tone; 2. Once you hear a dial tone, you are ready to make and receive calls. When placing calls, always use 10-digit dialing such as 210-555-1212 (area code + number) even if it is a local number. Configuration 2 - If you use a broadband solution that combines an ADSL modem or a cable modem with a router IMPORTANT NOTE: Your Linksys Phone A

  • 8 www.joip.com Step II: Connect your Linksys Phone Adapter 1. Connect the phone: Connect a telephone to “PHONE 1” of the two phone ports (as shown in the diagram below) on the Linksys; 2. Connect to the router or switch: Use the Ethernet cable provided in the packaging and connect the “INTERNET” port (as shown in the diagram below) on the Linksys to a spa

  • Cisco Linksys SPA 2102, 9 www.joip.com 3. Using the Linksys Phone Adapter as an ATA + Home Router IMPORTANT NOTE: Your PC need to be pre-configured as a DHCP client for use with Linksys Phone Adapter. If your PC is not configured as DHCP, please contact Customer Care at http://joip.custhelp.com/ for further assistance. INSTALLATION: Step I: Connect your Linksys Phone Adapter to your home network/router 1. Connect the phone: Connect a telephone to “PHONE 1” of the two phone ports (as shown in the diagram below) on the Linksy

  • Cisco Linksys SPA 2102, 10 www.joip.com 4. Connect the power: Connect the power cord to the receptacle on the Linksys marked “POWER” (as shown in the diagram below), and the power adapter to an electrical outlet; Step II: Configure the Linksys Phone Adapter 1. Launch the web browser on the PC. 2. Enter http://192.168.0.1/advanced in the Address field (192.168.0.1 is the default local IP address of the Phone Adapter). Then press the Enter key. 3. You will see a login screen (as shown in the diagram below). In the User Name field, enter user, the default user name for user

  • Cisco Linksys SPA 2102, 11 www.joip.com 6. Enter the user name in the PPPoE Login Name field, and enter the password in the PPPoE Login Password field. 7. Click Submit All Changes. Step III: Start making and receiving IP phone calls 1. Wait for the “POWER” and “PHONE” LEDs on the Linksys to stop blinking. It should only take a few minutes. Once the LEDs are solidly lit, pick up the telephone receiver and verify that you hear a dial tone; 2. Once you hear a dial tone, you are ready to make and receive calls. When placing calls always use 10-digit dialing such as 210-555-1212 (area code + number) even if it is a local nu

  • Cisco Linksys SPA 2102, 12 www.joip.com 4. VoIP Calling Features Take advantage of our advanced VoIP features: Call Forwarding - Forward all of your calls to another telephone number. We offer you different call forwarding options.  Unconditional call forward allows you to forward all incoming calls to another telephone number.  To enable, press *71*telephone number and the # key.  To disable, press *72 followed by the # key.  Conditional call forward provides 3 ways to enable call forward. 1. Busy Call Forward – Forward incoming calls to another phone when your phone is busy.  To enable, press *75*telephone number followed by the # key.

  • Cisco Linksys SPA 2102, 13 www.joip.com Caller ID - See the phone number and name of the person calling you with caller ID. Call Waiting - Call waiting allows you to take another call while you are already on the phone with someone. You will hear a tone indicating a second call. To answer the second call and put the first call on hold, press the flash button. Press flash to switch between calls. Cancel Call Waiting (*70) - Press *70 and dial the destination telephone number to disable call waiting during the call. Call waiting will be enabled during the next call you make. Call Waiting with Caller ID - Call waiting with caller ID displays the phone number and name of the incoming call

  • 14 www.joip.com 5. Web-Based VoIP Features Log into the Members Center with your account number and 4 digits password. You can then access the following features and information: My calls:  My Call Detail Records (CDRs) – View a log of all incoming and outbound calls.  My Voicemail – Check your voicemail box and set up new message email notifications. My

  • Cisco Linksys SPA 2102, 15 www.joip.com 6. For Further Assistance If you do not know how to set up your home router, Ethernet switch or hub Please refer to the user guide that came with these equipment. If you require further assistance Please contact Customer Care at http://joip.custhelp.com/ Thank you for choosing

Related Products and Documents (Adapter):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Air Delights E-30 Installation and operation instructions air-delights/e-30-58P.pdf 17 Nov 2022 4
2 EAW KF800 Specifications eaw/kf800-2BI.pdf 14 Jan 2023 1 0.05 Mb
3 Roland JD-Xi Owner's manual roland/jd-xi-Y9E.pdf 26 Jun 2023 20
4 NETGEAR XAVN2001 - Powerline AV 200 Wireless-N Extender Installation manual netgear/xavn2001-powerline-av-200-wireless-n-extender-DF5.pdf 24 Sep 2022 2
5 Fleet Farm 100257982 Owner's manual fleet-farm/100257982-98S.pdf 29 Jul 2022 2
6 ThinkPad Edge 14 Hardware maintenance manual thinkpad/edge-14-M3N.pdf 05 Nov 2023 206

Similar Resources:

  • WAGO

    I/O-SYSTEM 750

    (132 pages)
    Manual WAGO I/O System 750 753-661/000-004 4FDI 24V PROFIsafe Safe 4-Channel Digital Input; 24 VDC; PROFIsafe Version 1.0.0, valid from HW/SW Version 01/01 …
  • Qlogic

    QLE3044

    (2 pages)
    DATA SHEET QLE3044Quad Port 1GbE to PCIe® Intelligent Ethernet AdapterBenefitsIncreased application throughput and reduced host •CPU utilization due to stateless protocol offloadsOptimal use of I/O slots — multiple network ports •available on a single cardMost power-efficient quad port Gigabit Ethernet •(GbE) card on the marketPerformance scalabi …
  • Emulex

    OCm11102-N-X

    (10 pages)
    OneConnect™ OCm11102-N-X, OCm11102-I-X, OCm11102-N-XI and OCm10102-N-XI Virtual Fabric Adapters (CFFh) for IBM BladeCenter Release Notes for OneConnect SW Version 5.2.36 One Network. One Company. P007447-01A Rev. A Connect with Emulex. …
  • Viking

    E-10A

    (4 pages)
    PRODUCT MANUALDesigned, Manufactured and Supported in the USACOMMUNICATION & SECURITY SOLUTIONSProvide Convenient Handsfree CommunicationFeaturesThe E-10A and E-20B are telephone line poweredentry phones designed to provide two-way handsfreecommunication. Both function identically, but are avail-able in two different housings to better suit the appli-cat …
  • Pulsar

    PSA12010

    (2 pages)
    1 PSA12010 PSA 12V/1A switch mode power supply adapter for CCTV Edition: 5 from 24.05.2012 Supercedes edition: 4 from 18.11.2011 EN Features of the power supply unit: • power output 1A/12VDC • universal AC input voltage range 90÷264V • high efficiency 80% • standby power <0,3W • efficiency level: V • protection …
  • Adaptec

    1220SA - RAID Controller

    (2 pages)
    Serial ATA, the successor technology to parallelATA for data storage, is a point-to-point connection that delivers full throughput toeach storage device by allowing multipleports to be managed by a single controller.Adaptec Serial ATA technology delivers datatransfer rates starting at 3.0 Gb/s and a per-formance roadmap that calls for extensionsto 6.0 Gb/s. …

Comments, Questions and Opinions: