Manualios.com

Cisco EXPLORER 4540HDC guide Operation & User’s Manual

  • EXPLORER 4540HDC guide Set-top boxes
  • mah86dRcDIwv2
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 28

Cisco EXPLORER 4540HDC guide Manual Online:

3.3, 1438 votes
Cisco EXPLORER 4540HDC guide User Manual
Cisco EXPLORER 4540HDC guide User Guide
Cisco EXPLORER 4540HDC guide Online Manual

Text of Cisco EXPLORER 4540HDC guide User Guide:

  • Cisco EXPLORER 4540HDC guide, 17 Connecting to an HDTV with a 1394 Connector Important: When you connect the set-top to your TV using 1394, you must make the additional video and audio connections to your TV to receive analog signals. WARNING: Electric shock hazard! Unplug all electronic devices before connecting or disconnecting any device cables to the set-top. Required cables: • 1 4-pin to 4-pin 1394 cable (Consult your TV user guide for detailed information.) • 1 set audio Left/Right cable • 1 set composite A/V cables CABLE OUT CABLE IN VIDEO OUT S-VIDEO OUT USB ETHERNET 120 VAC 60Hz 40W 120 VAC 60Hz 3.4 A OPTICA

  • v IMPORTANT SAFETY INSTRUCTIONS, continued Verify the Power Source from the On/O Power Light When the on/o power light is not illuminated, the apparatus may still be connected to the power source. The light may go out when the apparatus is turned o , regardless of whether it is still plugged into an AC power source. Eliminate AC Power/Mains Overloads WARNING: Avoid e

  • iv IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat s

  • Cisco EXPLORER 4540HDC guide, 10 Frequently Asked Questions What is Digital Television? Digital television (DTV) is a huge leap forward in television technology compared to analog television that has been widely available since the 1940s. DTV is delivered and displayed using digital encoding, similar to the way a PC operates. By using digital technology, there is no variation in picture and sound quality from the origination point until it is displayed on your television. You always receive a high-quality picture without the wavy lines or static you might sometimes get from a weak analog signal. Because DTV receives and displays digital images that

  • Cisco EXPLORER 4540HDC guide, 12 Connecting to an HDTV with an HDMI Connector Important Notes Regarding the HDMI Interface on the Set-Top The HDMI interface automatically con gures the audio output for a format supported by the television. Because not all TVs support the Dolby Digital input, the HDMI interface may automatically select a 2-channel stereo audio con guration instead of Dolby Digital, which it carries over to the other digital audio outputs of the set-top. This prevents your home theater system or Dolby Digital decoder from providing the full Dolby Digital surroun

  • Cisco EXPLORER 4540HDC guide, 3 Front Panel 1 VOL +, VOL - Increases and decreases the volume 2 CH+, CH - Scrolls up and down through the channels 3 Select Provides access to your on-screen selection 4 Display Displays the selected channel number and time of day. The display shows the following: • Message ( ) • HDTV • Power ( ) • Output Resolution (1080i, 720p, 480p, or 480i) • AUTO - Automatically outputs native scan rates that your TV can accept 5 Guide Accesses on-screen services, such as the on-screen guide, video-on-demand, or pay-per-view 6 Info Displays a descr

  • Cisco EXPLORER 4540HDC guide, 9 Troubleshooting If the set-top does not perform as expected, the following tips may help. If you need further assistance, contact your service provider. No Picture • Verify that the M-Card module is installed. • Verify that the power to your TV is turned on. • Verify that your HDTV is in HD mode. If necessary, run the HD Setup Wizard to select HD mode. • If the set-top is plugged into a wall switch, verify that the switch is in the ON position. Note: You should avoid plugging the set-top into

  • Cisco EXPLORER 4540HDC guide, 19 Index D Dashes display 5 Diagrams. See Connecting the set-top to other devices Digital TV, What is it 10 Display 3 DVI connector 2, 4, 6, 13 F FAQs 10 FCC compliance 21 Formats, picture 11 Frequently Asked Questions. See FAQs Front panel 3 H HD broadcasting 10 mode 4, 5, 6, 7, 18 format 1, 10 HDTV Connections 6 formats 11 What is it 10 HDMI 4, 6, 12 High-de nition. See HD Home theater system connection 15 I Interlaced scan rate 11 IR Sensor 3 K Keys. See Front panel; Back panel 1394 4, 6, 17 A AC Outlet iv

  • Cisco EXPLORER 4540HDC guide, 8 View Television Programming Access Services and Programs Access cable services and programs by pressing the following keys on the remote control: • Guide–Access the on-screen guide. The on-screen guide displays schedules of TV programs and other services available from your cable service provider, such as video-on-demand and pay-per-view programs. • Arrows–Select a program in the schedule. • Info–Display a speci c program description (either from the on-screen guide or while viewing a program). �

  • Cisco EXPLORER 4540HDC guide, 6 Connections for an HDTV and VCR To use the set-top with an HDTV, you must make one of the following connections to view the HD content. In addition, you can make connections to a digital or analog VCR to record to a VCR tape. Refer to your TV and VCR user guides and the cabling diagrams in this guide for more detailed connection information. Note: The labeling on your set-top, HDTV, and VCR may vary slightly. 1394 DVI HDMIYPbPr RGB Required Connections to an HDTV (use one) Set-Top Connections HDTV Connections Some HDT

  • Cisco EXPLORER 4540HDC guide, 16 Note: This connection allows for recording to the VCR and for watching VCR tapes on your HDTV. To watch HD content, use the HDMI, YPbPr, or DVI connector. Connecting to a Stereo VCR and HDTV (optional) WARNING: Electric shock hazard! Unplug all electronic devices before connecting or disconnecting any device cables to the set-top. Required cables: • 1 RF coaxial cable • 2 sets composite A/V cables CAUTION Scientific-Atlanta, Inc. RISK OF ELECTRIC SHOCK DO NOT OPEN THIS DEVICE IS INTENDED TO B

  • Cisco EXPLORER 4540HDC guide, 18 Connecting the Set-Top in HD Mode to an SDTV with Component Input (YPbPr) WARNING: Electric shock hazard! Unplug all electronic devices before connecting or disconnecting any device cables to the set-top. Note: The set-top must be set to the proper output mode, typically 480i. Required cables: • 1 set component video cables (YPbPr) • 1 audio Left/Right cable CAUTION Scientific-Atlanta, Inc. RISK OF ELECTRIC SHOCK DO NOT OPEN THIS DEVICE IS INTENDED TO BE ATTACHED TO A RECEIVER THAT IS NOT USED TO RECEIVE OVER-THE-AIR BROADCAST SIGNALS. CONNECTION OF THIS DEVICE IN ANY OTHER FASHION MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS AND IS IN VI

  • Cisco EXPLORER 4540HDC guide, 1 Welcome The Cisco ® Explorer ® 4540HDC Digital Interactive Set-Top with a Multi-Stream CableCARD ™ (M-Card ™ ) provides high- de nition (HD) capability and broadband digital video services. Follow the instructions in this guide to install the 4540HDC, to become familiar with the buttons on the front panel, and to access your cable services. Then, enjoy the features of the 4540HDC and change the way you watch TV. Important: If the M-Card is removed, the set-top will not operate correctly. The consumer support website provides news and information about this product. For more information, please refer to http://www.cisco.com/web/consumer/support/ind

  • Cisco Systems, Inc. 678 277-1120 5030 Sugarloaf Parkway, Box 465447 800 722-2009 Lawrenceville, GA 30042 www.cisco.com Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its a liates in the U.S. and other countries. To view a list of Cisco’s trademarks, go to this URL: www.cisco.com/go/trademarks. CableCARD and M-Card are trademarks of Cable T

  • Cisco EXPLORER 4540HDC guide, 11 Picture Formats What is the Di erence Between a Standard-Screen and a Wide-Screen HDTV The type of screen your HDTV has (wide screen or standard screen) determines how the set-top displays programs on the screen. The picture format for an HDTV is a combination of aspect ratio and screen resolution and is di erent for standard-screen and wide-screen HDTVs. What is Aspect Ratio? An aspect ratio is the ratio of the width to the height of the TV screen. The aspect ratios di er because the television industry manufactures both standard-screen and wide-screen HDTVs to appeal to consumer viewing preferences. What is the Scre

  • Cisco EXPLORER 4540HDC guide, ii Notice to Installers The servicing instructions in this notice are for use by quali ed service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions, unless you are quali ed to do so. 20080814_Installer820 Note to System Installer CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. WARNING TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. For this apparatus, the coaxial cable shield/screen shall be grounded as close as practical to the point of en

  • Cisco EXPLORER 4540HDC guide, 21 FCC Compliance United States FCC Compliance This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against such interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

  • Cisco EXPLORER 4540HDC guide, 2 What’s In The Carton? The set-top carton contains the following items: Additional Equipment You Might Need You might need some of the cables and adapters shown below for connecting the set-top to your home entertainment devices. See the connection information in the Connection Diagrams section for more information. Check with your service provider for information about acquiring cables or adapters, or you can purchase cables or adapters at your local electronics supplier. Component Video Cables (YPbPr) Audio Left/Right Cable HDMI Adapter RGB Adapter • HDMI-to-HDMI Cable Optical Digital Audio Cable IEEE 1394 4-Pin to 4-Pin Cable RF

  • Cisco EXPLORER 4540HDC guide, iii Contents IMPORTANT SAFETY INSTRUCTIONS.......................................................................................iv Welcome ................................................................................................................................... 1 Safety First ................................................................................................................................ 1 Identify Your Set-Top .................................................................

  • Cisco EXPLORER 4540HDC guide, 5 Connecting the Set-Top To connect your set-top to your entertainment devices, complete these steps. Identify the additional devices you will connect to the set-top and TV. See the Connection Diagrams section of this guide. VCRDVD D-VCR Determine if your TV is HD or SD and whether it is wide screen (16:9) or standard screen (4:3). See page 11 for more information. Home Theater 4 3 16 9 or Make the connections for your TV and VCR as follows: • If you are using an HDTV, see page 6 and the connection diagrams at the end of this guide. • If you are

  • Cisco EXPLORER 4540HDC guide, 13 Connecting to an HDTV with a DVI Connector Notes: • When you connect the HDMI connector to the DVI connector on your HDTV, you need an HDMI-to-DVI adaptor and a separate audio connection. • Digital content is encrypted with High-Bandwidth Content Protection (HDCP) on the DVI/HDMI port. This set-top is not compatible with devices that do not support HDCP. You must use either the YPbPr or 1394 connection (which uses Digital Transmission Content Protection, or DTCP) to connect the set-top to these devices. • Also refer to the Important Note Regarding the HD

  • 14 Connecting to an HDTV with Component Input (YPbPr) WARNING: Electric shock hazard! Unplug all electronic devices before connecting or disconnecting any device cables to the set-top. Required cables: • 1 set component video cables (YPbPr) • 1 audio Left/Right cable CAUTION Scientific-Atlanta, Inc. STB RF MAC: 001868C16906 STB SN: SABNFSRVG RISK OF ELECTRIC SHOCK

Related Products and Documents (Set-top boxes):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 AEG Electrolux ENB3669 Instruction book aeg-electrolux/enb3669-Y51.pdf 17 Dec 2022 16 0.67 Mb
2 Echo GT-230 Operator's manual echo/gt-230-588.pdf 12 Aug 2022 32 1.76 Mb
3 Valcom VIP-431-DS Operation & user’s manual valcom/vip-431-ds-W66.pdf 03 Dec 2022 3 0.13 Mb
4 Genz Benz NEOX400-210T Owner's manual genz-benz/neox400-210t-BL3.pdf 02 Jan 2024 6 0.54 Mb
5 outstanding pet DR-500M Operation & user’s manual outstanding-pet/dr-500m-EJZ.pdf 31 Jul 2022 9
6 QSC 3200 Owner's manual qsc/3200-D2R.pdf 02 Oct 2023 28 0.91 Mb

Similar Resources:

  • Sony

    Sony TV Receiver NSZ-GT1

    (102 pages)
    Copyright 2010 Sony CorporationDid You KnowHomeKeypadSearchUsing ApplicationsInternetTVPlaybackConnectionSettingsParts & ControlsTroubleshooting / FAQOthersMedia Remote Search Help Guide FAQNSZ-GT11 …
  • Grundig

    GUD1500

    (24 pages)
    IMPORTANT: Please read all instructions carefully before use and keep for future reference.GUD1500 Digital BoxInstruction Manualgrundig gud1500 v3.indb 1 13/08/2009 15:31:33 …
  • TiVo

    BOLT Series

    (110 pages)
    TIVO VIEWER’S GUIDEThe following topics will help you learn to use your TiVo box. If you need more information or have questions, please contact Customer Support at 877-367-8486.GETTING STARTEDGetting around the TiVo menusUsing this guideQUICK TOURSQuick tour - the TiVo Central screenQuick tour - My ShowsQuick tour - OnePass™ searchesQuick tour - SkipMod …
  • Well

    REC-DVBT2-VISION-WL

    (6 pages)
    INSTRUCTION MANUAL DIGITAL VIDEO BROADCASTING Thank you for choosing WELL. Please read carefully the following instructions and keep them within reach. Reorder No: REC-DVBT2-VISION-WL …
  • Samsung

    SMT-S5260

    (6 pages)
    Samsung STBSharing rich experiences with happinessInspire the world, Create the futureSAMSUNG ELECTRONICS CO., LTD.Visual Display BusinessDong Suwon P.O.BOX 105, 416, Maetan-3dong, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea 442-600E-mail : [email protected] / [email protected]*All Product specification and appearance are subject to change withou …
  • BT

    Business Total Broadband

    (24 pages)
    Quick Start. Follow these five simple steps to get online.For help or more information, please see the User Guide.Broadband cable (grey ends)ADSL filterPower adapterBT Home HubUser Guide and CDCheck your box contents.1Fit an ADSL filter to every telephone socket that you use in your home. Socketscould be used by telephones, faxes and digital TV boxes (e.g. S …

Comments, Questions and Opinions: