Manualios.com

Compex NetPassage 28G Hotspot Operation & User’s Manual

  • NetPassage 28G Hotspot Wireless Router
  • maO36ec2cg7W.
  • Operation & User’s Manual
  • PDF / Adobe Acrobat Reader
  • 131

Compex NetPassage 28G Hotspot Manual Online:

3, 2099 votes
Compex NetPassage 28G Hotspot User Manual
Compex NetPassage 28G Hotspot User Guide
Compex NetPassage 28G Hotspot Online Manual

Text of Compex NetPassage 28G Hotspot User Guide:

  • Compex NetPassage 28G Hotspot, Chapter 5 Advanced Configuration 52 Private IP Address : Specify the IP address of your server PC running within the private network. Private Port From : Starting private port number. The ending private port number will be calculated automatically according to the public port range. Steps to configure Virtual Servers based on IP Forwarding When you have more than one IP address subscribed from your ISP, you may define Virtual Servers based on IP Forwarding for which all Internet requests, regardless of ports, are forwarded to defined computers in the private network. If you require more infor

  • Chapter 4 Let’s Get Going – Software Setup 25 CONFIGURATION: WAN SETUP The WAN Setup in Part 3(c) is a critical section on broadband setup. A successful configuration requires you to identify the type of broadband Internet access you subscribed to: i. Cable Internet where your ISP dynamically assigns an IP address to you, refer to Part 3(c)i titled WAN Setup - Cable Intern

  • Compex NetPassage 28G Hotspot, Chapter 5 Advanced Configuration 76 a router) is available on the network. Echo reply Replies to an ICMP echo request. Destination unreachable Informs the host that a datagram cannot be delivered. Source quench Informs the host to lower the rate at which it sends datagrams because of congestion. Redirect Informs the host of a preferred route. Time exceeded Indicates that the Time-to-Live (TTL) of an IP datagram has expired. Parameter Problem Informs that host that there is a problem in one the ICMP param

  • Compex NetPassage 28G Hotspot, Chapter 6 Using Hotspot Capabilities 90 Selecting User Agreement 1. Under HotSpot Status, tick the radio button next to User Agreement. Click Apply. The next screen include the following features: • Bandwidth • User Information • Account 2. Under Hotspot, click on User Information. The Terms & Conditions text box lets you compose the text and then click Apply.

  • Compex NetPassage 28G Hotspot, Chapter 5 Advanced Configuration 77 or a range of port numbers. Port numbers are from 0 to 65536. Ports 0 to 1024 are reserved for use by certain privileged services. For example, the port number for Telnet is 23 and the port number for http is 80. Destination Port : This parameter determines the application from the specified port number from the destination. Users can either set a single port number or a range of port numbers. Check Options : This parameter would determine the check options. The available selection op

  • Compex NetPassage 28G Hotspot, Appendix E Technical Specifications 122 Appendix E: Technical Specifications Industry Standards Wired: - IEEE 802.3 10Base-T - IEEE 802.3u 100Base-Tx - IEEE 802.3x Flow Control Wireless: - IEEE 802.11b - IEEE 802.11g WAN Interface - 1x Auto MDI/MDI-X RJ45 Ethernet Port for external Cable/ADSL modem WAN Type - Static IP - Dynamic IP - PPP over Ethernet (PPPoE) - Point to Point Tunneling Protocol (PPTP) LAN/WLAN Interface Wired: - Integrated 3x Auto MDI/MDI-X 10/100Mbps Switch Wireless: - Operating channels, frequency of: 1

  • Compex NetPassage 28G Hotspot, Chapter 5 Advanced Configuration 79 SECURITY CONFIGURATION: Log of IPs visited This feature allows you to keep track of the IPs that have been visited by LAN users. To ensure better security, the router can check which PC user have accessed which website. Sometimes when a parent needs to control the child’s Internet access rights to play games online and surf Internet under the busy parent’s little supervision, the parent can block some unsuitable IPs that are inaccessible for the child. Steps to keep track of the IP log 1. Se

  • Appendix B Frequently Asked Questions 115 Appendix B: Frequently Asked Questions Answers to Frequently Asked Questions In the section, we have compiled a short list of answers to some frequently asked questions about the router product. If you cannot find an answer here, you may visit the corporate Compex website at www.compex.com.sg or www.cpx

  • Compex NetPassage 28G Hotspot, Chapter 5 Advanced Configuration 54 ! In view of preventing unauthorized management from a remote location, please remember to replace the default password with a new one. You are also advised to change this password from time to time to guard against malicious attackers.

  • Compex NetPassage 28G Hotspot, Chapter 5 Advanced Configuration 81 SYSTEM TOOLS : System Identity As described before in Chapter 4, Part 2(d)I, Steps 8-10, you may define a name for your router, System Contact person and the System Location of the router. This name will also be used as the DHCP Client ID when the router negotiates with your ISP for IP release. Please refer to the earlier chapter for reference on this setup. SYSTEM TOOLS : Set Router’s Clock The router is specially designed with Simple Network

  • Compex NetPassage 28G Hotspot, Chapter 5 Advanced Configuration 34 3. Next, plug in the power adapter that is supplied in the package to the main electrical supply, and connect the power plug to the socket on the router. You may power on the device now. You are done with the hardware setup! Configuring your PC Configure your PC to obtain its IP address automatically. Alternatively, you may want to give your PC a static IP address if you are an expert user. For the details in configuring your PC to obtain dynamic IP address, kindly refer to the User’s Manual on. Configuration for the Router as Access Point 1. When all hardware in

  • Compex NetPassage 28G Hotspot, Chapter 6 Using Hotspot Capabilities 106 Disable : This button disables all accounts. Enable: This button enables all accounts. Pause: This button stalls the time assigned to all accounts. Reactive: This button resumes the time assigned to all accounts. Export: This button saves the user account’s billing statement into the text format. Add Time: This button adds time credits to all accounts.

  • Compex NetPassage 28G Hotspot, Chapter 5 Advanced Configuration 44 CONFIGURATION : LAN Setup : Advanced DHCP Server Options For instructions on basic LAN setup within the router, please refer to Chapter 4, part 2. In this portion, we shall examine the Advanced DHCP Server Options available to the network administrator. You can easily manage your network’s IP address allocation with the built-in DHCP server found on the router. Once set up as described in Chapter 4, it will automatically and dynamically allocate

  • Compex NetPassage 28G Hotspot, Chapter 4 Let’s Get Going – Software Setup 15 Part 1(c) : Configuring your PC with a Static IP address… If you are using Microsoft Windows 98SE or Windows Millennium 1. To begin the Static IP address configuration, follow steps 1 & 2 of Part 1(a) to get to the page on the right. 2. Click on the IP Address tab. Then type in the IP address and Subnet Mask of 192.168.168.X and 255.255.255.0 respectively, where X is any number from 2 to 254. (Note that the default IP address of the router is 192.168.168.1) 3. Next, click the Gateway tab to see the dialo

  • Chapter 5 Advanced Configuration 50 Steps to configure Virtual Servers based on Port Forwarding Virtual Server based on Port Forwarding is implemented to forward Internet requests arriving at the router’s WAN interface, based on their TCP ports, to specific PCs in the private network. If you require more information of its function, please refer to the NAT Techno

  • Compex NetPassage 28G Hotspot, Chapter 5 Advanced Configuration 43 2. By default, you will note that Wireless Pseudo VLAN is disabled. Click the Change button. 3. On the next screen, click the Per group radio button and hit Apply to complete the selection of your Pseudo VLAN Type. 4. You will be brought to the following set up screen requiring you to assign the hardware address of your client to a specific group you wish to segregate. Click on the Add button. 5. From the Add Group d

  • Compex NetPassage 28G Hotspot, Chapter 5 Advanced Configuration 40 CONFIGURATION : Wireless Setup: Wireless Pseudo VLAN The Wireless Pseudo VLAN feature on the router is exclusively created to solve the problem of privacy and data protection, to provide multiple levels of inter-client security. It is a natural extension of the Ethernet-based VLAN onto the wireless network in a corporation or even in a public ‘hotspot’ establishment. Wireless Pseudo VLAN segregates a single wireless LAN into multiple virtual LANs. Communication is only possible between wireless nodes of the same VLAN, and the router allows you to

  • Compex NetPassage 28G Hotspot, Chapter 5 Advanced Configuration 85 HELP : Get Technical Support You may wish to access this page for the relevant email, telephone/fax numbers and our corporate web site addresses so that you may find pertinent information. Steps to access the Get Technical Support page on the Router 1. Select Get Technical Support under the HELP command menu. 2. You have been looking at an extremely feature-packed device! Hence if you require more support information than the manual or datasheet can provide you, feel free to mail/phone the Compex’s tech- support found on this page. HELP : Memory Information The Memory Information page gives the administrator a

  • Compex NetPassage 28G Hotspot, Chapter 5 Advanced Configuration 82 SYSTEM TOOLS : Firmware Upgrade Significantly, the router is built with upgradeability in mind. You can keep your router updated with the latest capabilities by means of a simple firmware upgrade obtainable from Compex’s corporate web site at www.compex.com.sg or www.cpx.com. Steps to Upgrade the Router’s firmware Here is how you go about upgrading your router’s firmware with the latest update: 1. Select Firmware Upgrade under the SYSTEM TOOL

  • Compex NetPassage 28G Hotspot, Chapter 5 Advanced Configuration 59 ADVANCED FEATURES : Transparent Proxy The router can support transparent proxy by redirecting TCP connections to local ports. The transparent proxy is when you grab a certain type of traffic at your router and send it through the proxy without the user’s or client’s knowledge. It also can be used to transport traffic around at the firewall for certain applications (such as Netmeeting). This way, the router allows the applications using a transparent proxy to avoid the firewall by letting traffic pass through. Steps to enable/disable Transparent Proxy Here are two simple steps to activate or deactivate this feature: 1. Under the A

  • Compex NetPassage 28G Hotspot, Chapter 5 Advanced Configuration 35 6. Next, proceed to the WAN Setup from the Configuration Command menu. From here, choose the correct WAN type depending on your ISP. For example, if you are using the cable modem, use Dynamic WAN type. (For more details, refer to the section on WAN Setup). 7. Reboot the router.

  • Compex NetPassage 28G Hotspot, Chapter 5 Advanced Configuration 51 4. On the following Add Port Forward Entry screen, you can configure the Virtual Server for a Known Server type (selecting from a drop-down menu) OR you can define a Custom Server. For an elaborated explanation, please refer to the NAT Technology Primer found on the Product CD. 5. In this example, for Known Server, if you selected HTTP for the Server Type and entered a Private IP Address of 192.168.168.55, followed by clicking the Add button, you will see the entry reflected as on the right. Known Server Server

  • Chapter 5 Advanced Configuration 31 Chapter 5: Advanced Configuration Detailed Configuration of the Router This part of the setup for the router is meant for the advanced user who requires more than the essential information to set up a wired/wireless network infrastructure. Adopting a top-down approach to explain the features found on the router, what fol

Related Products and Documents (Wireless Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 TRENDnet TEG-S160TX - Gigabit Switch With 31 Gbps Switching Capacity Operation & user’s manual trendnet/teg-s160tx-gigabit-switch-with-31-gbps-switching-capacity-R5V.pdf 28 Aug 2022 20 0.09 Mb
2 AirLink Communications Raven X HSDPA Operation & user’s manual airlink-communications/raven-x-hsdpa-YMB.pdf 10 Mar 2024 107
3 GE Monogram ZIC30GNZAII Owner's manual ge/monogram-zic30gnzaii-V35.pdf 04 Jun 2023 68
4 Lenovo L410 Setup manual lenovo/l410-789.pdf 15 Jan 2024 2
5 Cisco SPA232D Quick start manual cisco/spa232d-991.pdf 31 Jul 2022 16 0.71 Mb
6 Sharp AR-M236 Software setup manual sharp/ar-m236-GVL.pdf 08 Sep 2022 20 1.05 Mb

Similar Resources:

  • Aristel

    NEOS 3000A-04

    (8 pages)
    ARISTEL NETWORKS PTY. LTD Models: Q1 or later, ARB2, ARB3, ARB4 (GSM) & NEOS 3000A-3G ARB4 Manual Ver. 1.4 Nov 2009 page 1 NEOS 3000 Least Cost Wireless Router For models: NEOS 3000A-04 TC35iA5-Q1 or later (GSM) NEOS 3000A-09 MC37i A4-ARB2 or ARB3 or ARB4 (GSM) NEOS 3000A-3G09 SIM5218A1-ARB4 (Next G & 3G) NEOS 3000A-3G11 …
  • NETGEAR

    WGR826V

    (36 pages)
    © NetgearInc. 2004 Page 1 of 36 All Rights Reserved User’s Manual for Netgear WGR826V Netgear Inc. 4500 Great America Parkway Santa Clara, California 95054 USA. Phone: (408) 907-8000 Fax: (408) 907-8097 Web Site: http://www.netgear.com …
  • ZyXEL Communications

    P-660HN-TxA

    (10 pages)
    www.zyxel.com802.11n Wireless ADSL2+ 4-port Gateway Firmware v3.40Edition 1, 6/2010P-660HN-TxADEFAULT LOGIN DETAILSIP Address: http://192.168.1.1Password: 1234Copyright 2010ZyXEL Communications Corporation …
  • SEW-Eurodrive

    MOVIPRO 1796 6167

    (10 pages)
    Mounting Instruction MOVIPRO Option: 1796 6167 WLAN-Karte #MPCI Für diese technischen Unterlagen behalten wir uns alle Rechte vor / Copyright reserved / Tous droits de modification réservésSEW-EURODRIVE GmbH & Co KG Postfach 301. Mounting of 1st WLAN CardUsed Material: PartNo. Qty. Designation 1824 0461 1 REC5 IP5K BASE prg.1813 0569 1 Thermal …
  • ViewSonic

    PJD5523w

    (2 pages)
    The ViewSonic® PJD5523w is an advanced DLP® projector which includes BrilliantColor™ technology to produce more vibrant colors, with high brightness and contrast ratio make it shine in virtually any lighting situation. The PJD5523w delivers 2,700 ANSI lumens, 3,000:1 dynamic contrast ratio with a widescreen 1280x800 W …
  • Cisco

    881

    (12 pages)
    Data Sheet © 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 12Cisco 880 Series Integrated Services Routers A secure, flexible, easy-to-manage router to connect small businesses Cisco 880 Series Integrated Services Routers Cisco® 880 Series Integrated Services Routers offer a highly secure way for your …

Comments, Questions and Opinions: