COMPRO IP540 Operation & User’s Manual

Text of COMPRO IP540 User Guide:

• COMPRO IP540, 6-5Camera Settings Camera Settings Camera Settings Chapter 6: Conguration Normal lighting (Indoor lights on) Without IR LEDs (Indoor lights o) With IR LEDs (Indoor lights o) Figure 6-4. Eect of IR LEDs The IR light sensor allows the camera to detect the lighting condition of the environment and to turn on/ otheIRLEDsaccordingly;youcanconguretheIRlightoperationmodetobe[Auto],[AlwaysOn],[Always O ], or [By Schedule]. Figure 6-5. IR light control For scheduling on/o time of the IR LEDs, you can directly input the desired open and close time,

• COMPRO IP540, Contents <頁頁頁頁頁頁> Contents 01 Contents Chapter 1: Important Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1 Regulatory Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Operation Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

• COMPRO IP540, 5-2 Icons on Live View Page Page Layout - 570(P) Compro IP540(P) / IP570(P) Page Layout - 570(P) Figure 5-2. Layout of LiveView page for IP570(P) Left control panel – Here provides control over video recording, voice communication, I/O, Pan/Tilt and snapshot. Video stream selection – You can switch between Stream-1 and Stream-2. (Stream-2 can be enabled and congured in video settings.) PTZ Speed – Set the Pan and Tilt speed from a scale of 1 to 10. Video mode selection – Let you switch video display between single, multi, and auto scan mode. Top control panel – Let you adjust camera video and microphone and

• 9-5Trouble with Remote Viewing on Browser Trouble with the ActiveX Client Chapter 9: Troubleshooting Trouble with Remote Viewing on Browser You can view your camera video remotely over the Internet. If you have problem in remote viewing, refer to the section below for preliminary troubleshooting. IP Camera Remote Viewing Client NAT (Network Address Tra

• COMPRO IP540, 6-7Network Settings Audio Settings Chapter 6: Conguration Figure 6-8. Adding/Modifying user Network Settings Here you can check your network settings and adjust the detailed settings. Figure 6-9. Network settings Ethernet Set up the IP address for the IP camera to obtain IP address via DHCP (recommended), or use the manually inputted static IP address, or obtain IP address via PPPoE for which you need to provide valid user name and password. Wireless If you have installed the Compro wireless adaptor on your IP camera, you can set up the wireless connection in this page. To connect wirelessly, please check the [Use Wireless First] box to give

• COMPRO IP540, 4-5Accessing via 3GPP Mobile Phone Accessing via iPhone/Smartphone Chapter 4: Accessing the Camera Accessing via 3GPP Mobile Phone You can access your IP camera via 3GPP-compatible mobile phones when the IP camera has a stable internet connection and the mobile device has a good connection on GPRS or to 3G network. There are several prerequisites which need to be met before using the 3GPP function successfully. 1. User should turn on the 2nd stream of the IP camera and set the resolution as QQVGA, FPS as 5, codec as

• COMPRO IP540, 6-14 Recording Setup Event Setup Compro IP540(P) / IP570(P) 7. Note: You must have enough credit at Clickatell in order to send SMS message. Trigger Setup You can create, modify, or delete event triggers and set the trigger mechanism to be by Schedule, Motion/ Audio Detection or I/O ports. When creating an event trigger by schedule, you can set up scheduled time and period. When setting event trigger as by Motion Detection, you can select the trigger area dened in the Motion Detection setting. You can also select the I/O port to be triggered. After nishing setting event trigger, click [Next] to select event actions so your camera wi

• 5-4 Icons on Live View Page Icons on Live View Page Compro IP540(P) / IP570(P) Icon Name Description Snapshot Click the Snapshot button to take a snapshot of live view. A preview window will pop up once you hit this button (the size of the preview image is forced as 320 by 240 pixels). Right-click on the preview image and choose ‘Save Image As’ to save the snapsho

• COMPRO IP540, 1-2 <頁頁頁頁頁頁> About this Manual Compro IP540(P) / IP570(P) About this Manual This manual is only intended for the users of Compro IP540, IP540P, IP570, and IP570P network camera. The content of this manual is applicable to firmware release 2.0. The camera on the cover of this manual is a Compro IP540, which slightly diers with IP570 in appearance. Conventions in this Manual While you are using this manual, pay attention to some symbols and notations that are used to draw attention to special situations such as: Caution!

• COMPRO IP540, 9-10 Symptoms, Causes and Solutions Symptoms, Causes and Solutions Compro IP540(P) / IP570(P) Symptom Possible Cause/Solution Network diagnosis shows error icon. Network connection error. The network connection test veries if the camera has successfully connected to the LAN network. When the diagnosis result shows a red exclamation mark icon ( ) for network connection, it means the camera fails to connect to LAN network. Check if the LAN cable is securely connected to the Ethernet port of the camera and to your hub/router, or check if the LAN c

• COMPRO IP540, 3-13Installing Camera Software Installing Camera Software Chapter 3: Installtion 3. The wizard will search for all the available cameras on your local network. You can select your camera from the list on the left side, and it will display live view video and camera information on the right side. (You can double-check the device name and the MAC ID. The MAC ID is printed on the serial number sticker at the back of IP camera or on the package.) You may also double-click on any camera from the connected camera list to view its live video. Figure 3-2

• COMPRO IP540, 3-9Installing Camera Software Installing Camera Software Chapter 3: Installtion 10. (Skip this part if you enabled Seedonk service) If you didn’t enable Seedonk service earlier, you can set up iDDNS service here. To do so, click [Yes] and input your desired address name. Then click [Check Availability] button to check if the entered address name has been used. When successful, you can click [Create Shortcut] button to create a shortcut on your desktop for convenient access. Figure 3-16. iDDNS conguration Note: The iDDNS is a free DDNS (Dynamic Domain Name Service) service from Compro. If

• COMPRO IP540, 3-14 Installing Camera Software Installing Camera Software Compro IP540(P) / IP570(P) 6. Select the configuration of your IP address to be DHCP (obtaining IP address automatically) or manually enter IP address information. Choose whether to allow iWizard to automatically configure your rewall, set up connection port, and choose frequency of your local power. Figure 3-27. IP conguration 7. Select the orientation of your IP camera in Standard Position or Ceiling Mount. You can also change the orientation setting later via the Web client. Figure 3-28. Orientation setting 8. If you already connected the Compro wireless adaptor to your IP camera, please cli

• COMPRO IP540, 1-1Regulatory Notice <頁頁頁頁頁頁> Chapter 1: Important Notices Chapter 1: Important Notices Regulatory Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designe

• COMPRO IP540, 5-1Page Layout - 540(P) <頁頁頁頁頁頁> Chapter 5: Live View Chapter 5: Live View Page Layout - 540(P) On the rst page, you can see the basic control panel at the top and on the left-hand side, and the live video on the right-hand side. Click on the icon to hide or show the control panels. Figure 5-1. Layout of LiveView page for IP540(P) Left control panel – Here provides control over video recording, voice communication, I/O, Pan/Tilt and snapshot. Video stream selection – You can switch between Strea

• COMPRO IP540, 6-8 Network Settings Network Settings Compro IP540(P) / IP570(P) Figure 6-10. Wireless settings Network Diagnostic Here you can run the diagnostic tool for your current network settings and it will show error messages if any anomaly is detected. For further information on error messages, please refer to the FAQ section in this manual or visit www.comprosecurity.com for more information. Network Bandwidth This automatic network connection speed detection is to help users better dene appropriate video bit rate for their app

• COMPRO IP540, 4-1Viewing Live Video Stream <頁頁頁頁頁頁> Chapter 4: Accessing the Camera Chapter 4: Accessing the Camera Viewing Live Video Stream Compro provides a wide range of access method to view the live video streamed from the IP camera that you’ve just installed, which includes: 1. View the live video stream from a single camera on the Internet Explorer (WebVUer) which comes with all Desktop/Laptop/Nettop/Tablet with Windows system. This is the easiest way to view the video of the IP camera and requires little lear

• COMPRO IP540, 3-3Wireless Connection Connecting Using PoE Function Chapter 3: Installtion Wireless Connection With the Compro wireless adaptor installed, you can also opt for using the wireless connection. Please keep in mind that you can only have one active connection at a given time, either through LAN or wireless network. If you connect the IP camera to the Intranet, then the same group of users can share the access of IP camera. Please also ensure that the wireless adaptor has been securely fastened, or it could lead to unstable co

• 9-13Contacting Compro Technical Support Symptoms, Causes and Solutions Chapter 9: Troubleshooting Symptom Possible Cause/Solution Cannot store recordings on microSD card. The microSD card is not inserted rmly into position. Remove the memory card and re-insert it back to the card slot. To verify if your SD card is properly installed, go to [Setup] > [Recording Se

• COMPRO IP540, 8-2 <頁頁頁頁頁頁> Maintenance Prole Management The profile management feature allows installers and users to set up more than one camera of similar configurations at great ease. After the current camera is properly configured, users can export current camera's conguration to a prole on PC and then load it into other cameras, thereby making least changes possible like changes on IP address or a few other settings that might need to be modied individually when conguring a newly added camera. In addition, this feature can also be considered as a backup mechanism for future service need. 1. After the current came

• COMPRO IP540, 4-4 Accessing via 3GPP Mobile Phone Accessing via iPhone/Smartphone Compro IP540(P) / IP570(P) Accessing via iPhone/Smartphone As long as your device comes with built-in web browser, you can use the device to view the live video stream via MJPEG mode (video only), which is supported on popular smartphones like iPhone and a wide range of mobile devices such as NB, Mobil Phone, PDA, Nettop, MID, Tablet. Platforms and supported web browsers: • Windows:IE,GoogleChrome,Safari,FireFox(non-IEbrowsersrequireVLCplug-in) • Linux:FireFox • MobileDevice:iPhone,iPodTouch

More Instructions:

	COMPRO IP540 Operation & user’s manual 15-10-2022 64	DOWNLOAD
	COMPRO IP540 Operation & user’s manual 22-03-2024 68	DOWNLOAD

Related Products and Documents (IP Camera):

Comparable Devices:

Similar Resources:

• MicroNet SP5319 (2 pages) Communicate via Quick Installation GuideModel No.: SP531965720p HD Starlight Box IP CameraSoftware InstallationThe camera setup wizard, IPSearchUtility2, that comes with your camera is a conveniently utility to search the connected camera within the network from your computer.To install the utility on your computer:1.Insert the Installation CD into the compu …

• Vicon ROUGHNECK V910 (25 pages) XX137-00-03 V910 IMPACT-RESISTANT DOME CAMERAS Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the operation will be entirely error free or perform precisely as described in the documentation. …

• Axis M1103 (56 pages) INSTALLATION GUIDEENGLISH DEUTSCHITALIANOESPAÑOLFRANÇAIS日本語AXIS M11 SeriesAXIS M1103 Network CameraAXIS M1104 Network CameraAXIS M1113 Network CameraAXIS M1114 Network Camera …

• Spy On A Bird Network Camera (71 pages) 1 Spy On A Bird User's Manual (for Indoor IP Camera) V4.21 Network Camera Please read this manual carefully before you attempt to Install this product and retain it for your future reference. …

• Linking ALC-9751 (4 pages) Quick GuideConnection diagramɓ!Alarmɓ!PowerAttention1. Where no switch hub is available, you can search and set up the camera using the network peering approach. However, you may need a jumper and need to change the LAN configuration on your PC for this purpose. It is recommended to request a qualified engineer for the connection or …

• InFocus Kandao Meeting (14 pages) 产品名称： 360全景会议摄影机型号： WL0308制造商： 深圳看到科技有限公司地址： 深圳市南山区科文路9号中钢大厦M7栋5DProduct Name: Intelligent360 degree panoramic cameraModel: WL0308Manufacturer: Kandao Technology Co.,Ltd.Address: Unit 5D, Block M7, SinoSteel Building, Nanshan, Shenzhen, China说明书/說明� …

Comments, Questions and Opinions: