Manualios.com

CUMMINS ALLISON JetScan Operation & User’s Manual

CUMMINS ALLISON JetScan Manual Online:

4.7, 1161 votes
CUMMINS ALLISON JetScan User Manual
CUMMINS ALLISON JetScan User Guide
CUMMINS ALLISON JetScan Online Manual

Text of CUMMINS ALLISON JetScan User Guide:

  • CUMMINS ALLISON JetScan, 2 JetScan ® MACHINE DIAGRAM Machine Diagram Denomination value keys Display Clear key Cont key Stacker Display Function keys Stacker wheels Feed roller Hopper Thickness adjustment dial Stacker mirror Feed roller Feeder plate Function keys Power switch and power cord on rear of unit Stacker sensor Hopper guides

  • CUMMINS ALLISON JetScan, JetScan ® 3 DAILY CLEANING Daily cleaning of the JetScan ® currency scanner is recommended to ensure maximum productivity and reliability, especially for high-volume applications, as well as for those processing highly circulated (dirty) notes. Follow these steps, which only will take a few minutes. Daily Cleaning Procedures Recommended Cleaning Materials •Simple Green Safety Towels. (Part number: 022-2118-00.) A pre-moistened microfiber towel also may be used. If using Simple Green concentrate, dilute to: 1 ounce of Simple Green per 8 ounces of water. For a material-safety-data sheet, see simplegreen.com. •Microfiber towels. (Part number: 022-2223-00.) •A clean,

  • CUMMINS ALLISON JetScan, 4 JetScan ® DAILY CLEANING Daily Cleaning 2 Disconnect power cord from the rear of the JetScan. Remove hopper extension. Turn power OFF (rocker panel to 0). High voltage inside. Risk of electric shock. Turn power OFF and unplug power cord from machine before cleaning. To avoid machine/component damage and potential voiding of existing warranty, follow these procedures: Only use specified tools for cleaning machine. Never use metal tools. If using Simple Green concentrate, dilute to: 1 ounce of Simple Green per 8 ounces of

  • CUMMINS ALLISON JetScan, JetScan ® 5 DAILY CLEANING Remove feeder plate as shown at left. 4 5 Use a microfiber towel to clean the black start sensor at the top, middle of the feeder plate. Start sensor Use a Simple Green Safety Towel to remove dirt buildup from the upper and lower aluminum rollers. To reach all exposed surfaces, rotate the large, black feed rollers forward (direction of note flow). (See Helpful Hint.) If there is heavy buildup on the aluminum rollers, remove it with a clean, soft eraser as shown. 6 Helpful Hint: Rotating the large, black feed rollers will rotate all other shafts and rollers in the machine. These rollers can be

  • CUMMINS ALLISON JetScan, 6 JetScan ® DAILY CLEANING Replace feeder plate. Insert curved edge of feeder plate first. Gently press down on feeder plate until it snaps into position. Curved edge 10 Use a microfiber towel or vacuum to remove any remaining dust in the bottom stacker. 8 7 Use a Simple Green Safety Towel to clean all rubber sections of the large, black feed rollers. Rotate the rollers. Also clean the flat, center rubber-drive tire. Flat, center rubber-drive tire Use a microfiber towel to clean the stacker-sensor lens located in the stacker tray bet

  • CUMMINS ALLISON JetScan, JetScan ® 7 DAILY CLEANING Carefully reconnect power cord. Perform a test run with some notes. 13 15 14 Turn power ON (rocker panel to I). 11 Clean exterior surfaces as necessary with a Simple Green Safety Towel. Replace hopper extension. 12

  • CUMMINS ALLISON JetScan, 8 JetScan ® STOPPING CONDITIONS & RECOVERY Stopping Conditions and Recovery Steps DISPL AY DISPL AY JetScan may have processed two or more notes as one. JetScan has identified a note that is different than those it has been processing while using sort mode. This first note of the different denomination is the top note in the lower stacker. Remove all notes from the bottom stacker. Separate the top note from the remaining notes. Put the top note in the location for its denomination. Put all the other notes (they are all the same)

  • CUMMINS ALLISON JetScan, JetScan ® 9 STOPPING CONDITIONS & RECOVERY DISPL AY DISPL AY JetScan has identified a note that is incorrectly faced. Notes or possibly foreign material are jammed in the paper path and must be removed. Users should either: •Facethenote,replaceitinthebottomstacker,andpresstheappropriate denomination value key. •Correctlyfacethenote,returnittothetophopper,andpressCont. Do not use tools or metal devices to remove jammed notes from paper path. Use of tools or metal dev

  • CUMMINS ALLISON JetScan, 10 JetScan ® STOPPING CONDITIONS & RECOVERY Remove all notes from the top hopper and bottom stacker. Remove the hopper extension, as shown in inset. Remove the feeder plate, as shown at right. 1 Remove feeder plate by lifting with fingers in the two depressions. Raise the two red, plastic “T” handles at the same time and hook them onto the metal shaft. Then either: •Movejammednotesforward/ back by manually rotating the large, black feed rollers. (See Helpful Hint shown earlier in this document.) •PressClear to slowly move the feeder forward. •PressStrap to slowly move the feeder in reverse. Remove all jammed n

  • CUMMINS ALLISON JetScan, JetScan ® 11 STOPPING CONDITIONS & RECOVERY Replace feeder plate. Insert curved edge of feeder plate first. Gently press down on feeder plate until it snaps into position. Curved edge 4 3 Unhook the two red, plastic “T” handles from the metal shaft and lower them at the same time. Replace the hopper extension. Press Cont. Rerun all notes that were in the top hop- per and bottom stacker at the time of the jam. 5

  • CUMMINS ALLISON JetScan, 12 JetScan ® STOPPING CONDITIONS & RECOVERY DISPL AY DISPL AY JetScan cannot recognize the denomination of a note and has stopped. This “NO CALL” note is the top note in the bottom stacker. This note has not been included in the count. JetScan has identified a note that is incorrectly oriented. Users should either: •Orientthenoteandreturnittothebottomstacker,thenpressthe appropriate denomination value key ($1, $5, $10, etc.). •Correctlyorientthenoteandreturnittothetophopperandpre

  • JetScan ® 13 STOPPING CONDITIONS & RECOVERY DISPL AY DISPL AY DISPL AY JetScan has detected a note of a different denomination from those being counted and has stopped. This “stranger” note is the top note in the bottom stacker. This note has not been included in the count. The wrong denomination value key was pressed. The number of notes in the

  • CUMMINS ALLISON JetScan, 14 JetScan ® STOPPING CONDITIONS & RECOVERY DISPL AY JetScan sensors have detected a possible counterfeit note. JetScan has stopped with this note as the top note in the bottom stacker. This note has not been included in the count. Inspect the top note in the bottom stacker. Next there are two options: •Ifitisidentiedasacounterfeit,placeitasideandpressCont. It will not be part of the count. •Ifthenoteisdeterminedtobegood,returnittothebottomstackerand press the appropriate denomination value key. Je

  • CUMMINS ALLISON JetScan, JetScan ® 15 STOPPING CONDITIONS & RECOVERY DISPL AY JetScan sensors have detected a possible counterfeit note. JetScan has stopped with this note as the top note in the bottom stacker. This note has not been included in the count. Inspect the top note in the bottom stacker. Next there are two options: •Ifitisidentiedasacounterfeit,placeitasideandpressCont. It will not be part of the count. •Ifthenoteisdeterminedtobegood,returnittothebottomstacker and press the appropriate denomination value key. JetScan will re-start, and this note will be a

  • 16 JetScan ® STOPPING CONDITIONS & RECOVERY Code Possible Causes S1 •Incorrect-notepaper •Soilednote S2 •Incorrect-notepaper •Machine-washednote •Tapednote S3 •Incorrect-notepaper •Soilednote S5 •Incorrect-inkerror •Wornnote S8* •Notefailedadvancedcounterfeittest •Wo

  • JetScan ® 17 STOPPING CONDITIONS & RECOVERY DISPL AY DISPL AY JetScan is indicating there possibly is a problem with the right, left or both doubles sensors. JetScan is indicating there possibly is a problem with the ultraviolet (UV) bulb (“BECOMING WEAK,” “INTENSITY OUT OF RANGE” or “UNRELIABLE”). Press Cont to continue operation. If the machine is not equipped wit

  • CUMMINS ALLISON JetScan, Cleaning Supplies Desktop Currency Equipment Cleaning Kit 406-1000-01 The kit contains: • Two stick erasers • 20 microber towels Items Sold Separately • One stick eraser. 022-1695-00 • 10 microber towels. 022-2223-00 • 50 Simple Green Safety Towels. 022-2118-00 • Vacuum, for use in the United States only. Standard vacuum: 022-1959-00 Heavy-duty vacuum: 022-1308-00 The following items are available for purchase through Cummins Allison • 50 Simple Green Safety Towels • User guides How to Order To place an order in the United States, visit store.cumminsallison.com. To place an order outside o

  • 852 Feehanville Drive Mt. Prospect, IL 60056 800 786 5528 cumminsallison.com © 2015 Cummins-Allison Corp. All rights reserved. All trademarks remain the property of their respective owners. Information is subject to correction or change without prior notice. This manual contains proprietary information of Cummins Allison. It is intended solely for the informatio

Related Products and Documents (Scanner):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 AEG FH 64.1GD Operating instructions manual aeg/fh-64-1gd-549.pdf 15 Sep 2023 24 0.74 Mb
2 Agri-Fab LST 42A Owner's manual agri-fab/lst-42a-B5P.pdf 04 Sep 2023 28 4.94 Mb
3 Philips 90RC438 Service manual philips/90rc438-61R.pdf 08 Dec 2023 39
4 Superior DRC3035DEN Installation and operation instructions manual superior/drc3035den-PC9.pdf 09 Apr 2023 82
5 Axxess AX-ADFD01 Installation instructions manual axxess/ax-adfd01-W6R.pdf 08 Aug 2023 16
6 Sandstrom SID60W12N Installation instructions manual sandstrom/sid60w12n-16G.pdf 10 Jun 2023 228

Similar Resources:

  • Epson

    1640XL - Expression Graphic Arts

    (2 pages)
    EPSON Expression®1640XL Color Flatbed ScannerThe high resolution, 1600 dpi, large-format scanner for graphic arts professionals.With superior image quality, speed, and versatility, the EPSONE x p r ession 1640XL has all the features you desire most as a graphic artsp r ofessional. This economical, high performance scanner offers ani n c r edible 1600 x 3200 …
  • Hydro

    HYDR8

    (4 pages)
    HYDR8 Skin Scanner User Manual 3 Easy Steps to let you know the condition of your skin: 1. Remove cap & turn on by pushing gray button 2. Press the metal rods firmly onto your skin/cheek/forehead holding in place until it beeps twice 3. Read analysis chart on the back of the unit HYDR8 detects oil, water, and cellular levels to help balance …
  • LZR

    FLATSCAN SL

    (12 pages)
    LZR®- FLATSCAN SLsurfacePLEASE KEEP FOR FURTHER USE - DESIGNED FOR COLOUR PRINTINGENUser’s Guide for product version 0100 and higherSee product label for serial numberCOMPACT LASER SCANNER FOR SLIDING DOOR …
  • Epson

    Stylus CX4600

    (4 pages)
    EPSON PIS # T044220 Version 3.52 (USA) Page 1 of 4 Release Date 01/04 Product Information Sheet 1. Article and Corporate Identification Product: Epson Ink Cartridge T044220 for use with Epson Stylus Color C64, C66, C84, C84N, C84WN, C86, CX4600, and CX6400 Printers Manufacturer/Distributor: Epson America, Inc. 3840 Kilroy Airport Way Long Beach, …
  • Rockwell Automation

    Allen-Bradley 1747-SN

    (173 pages)
    Artisan Technology Group is your source for quality new and certied-used/pre-owned equipment• FAST SHIPPING AND DELIVERY• TENS OF THOUSANDS OF IN-STOCK ITEMS• EQUIPMENT DEMOS• HUNDREDS OF MANUFACTURERS SUPPORTED• LEASING/MONTHLY RENTALS• ITAR CERTIFIED SECURE ASSET SOLUTIONSSERVICE CENTER REPAIRSExperienced engineers and techni …
  • Infinite Peripherals

    PP-55

    (3 pages)
    . . . . . . . . . . . . . . . . . . . . . . . . . . . . Infinite Peripherals, Inc. www.ipcprint.com PP-55 Connector Specifications Version 1.01 PP-55Connectors Specification …

Comments, Questions and Opinions: