Manualios.com

D-Link DCS-4701E Operation & User’s Manual

D-Link DCS-4701E Manual Online:

3.25, 2318 votes
D-Link DCS-4701E User Manual
D-Link DCS-4701E User Guide
D-Link DCS-4701E Online Manual

Text of D-Link DCS-4701E User Guide:

  • 26D-Link DCS-4701E User Manual Section 3: Conguration Network Setup Use this section to congure the network connections for your camera. All relevant information must be entered accurately. After making any changes, click the Save Settings button to save your changes. LAN Settings: DHCP: Static IP Client: IP Address: Subnet Mask: Default Gateway: Primary DNS: Secondary DNS: This

  • D-Link DCS-4701E, 47D-Link DCS-4701E User Manual Section 3: Conguration Access List Here you can set access permissions for users to view your DCS-4701E. Allow list: Start IP address: End IP address: Delete allow list: Deny list: Delete deny list: The list of IP addresses that have access rights to the camera. Note: When adding entries to the Allow list, make sure the rst entry includes the IP address of the computer or device you are using to access the camera. Otherwise, you may be blocked from accessing the camera after adding the entry to the

  • D-Link DCS-4701E, 52D-Link DCS-4701E User Manual Section 3: Conguration Firmware Upgrade The camera's current rmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest available rmware version. To upgrade the rmware on your DCS-4701E, please download and save the latest rmware version from the D-Link Support Page to your local hard drive. Locate the le on your local hard drive by clicking the Browse button. Select the le and click the Upload button to start upgrading the rmware. Current Firmware Version: Current Product Name: File Path: Upload: Dis

  • D-Link DCS-4701E, 5D-Link DCS-4701E User Manual Section 1: Product Overview Introduction Congratulations on your purchase of the DCS-4701E Vigilance HD Outdoor PoE Mini Bullet Camera. The DCS-4701E is a professional surveillance and security solution for small, medium, and large enterprises alike. The DCS-4701E uses an HD progressive scan CMOS sensor; the professional sensor results in low noise and high sensitivity capabilities ideal for surveillance applications. The DCS-4701E is a complete system with a built-in CPU and incorporates a web server, allowing it to tr

  • D-Link DCS-4701E, 9D-Link DCS-4701E User Manual Section 2: Assembly and Installation Mounting the Camera It is highly recommended that you congure and test your camera before mounting it. Step 1 Place the mounting sticker where you want to position the camera. Make sure the camera base will be positioned so that the cable channel is on the bottom. Use a 6 mm drill bit to make the required holes approximately 25 mm deep, then insert the wall anchors into the holes. If you are running the camera cables through the wall, drill a hole in the center and pull the cables through the hole. Step 2 Use the screws provided to mount the camera to the wall. If you are running the camera cables out the

  • D-Link DCS-4701E, 12D-Link DCS-4701E User Manual Section 2: Assembly and Installation Step 4 Screw the back part of the waterproof connector clockwise until there is a tight seal around the Ethernet cable. Step 3 Connect the RJ-45 plug into the Ethernet connector, then screw the waterproof connector to the Ethernet connector by turning it about a half-turn clockwise. If you are using PoE to power your camera, use the included rubber power connector plug to the power connector.

  • D-Link DCS-4701E, 43D-Link DCS-4701E User Manual Section 3: Conguration Add Recording Recording entry name: Enable this recording: Priority: Source: Recording schedule: Destination: Total cycling recording size: Enter a name for the recording. Select this to enable the recording function. Set the priority for this entry. An entry with a higher priority value will be executed rst. Select the video prole to use as the recording source. Use the checkboxes to set which days to record video on. Select Always to record for the entire day, or select From and select what period of time you want to record using the dropdown boxes. Select the folder

  • D-Link DCS-4701E, 50D-Link DCS-4701E User Manual Section 3: Conguration Maintenance Device Management You may modify the name and administrator’s password of your camera, as well as add and manage the user accounts for accessing the camera. You may also use this section to create a unique name and congure the OSD settings for your camera. Admin Password Setting: Add User Account: User Name: Password: User List: IP Camera Name: Enable OSD: Label: Show Time: LED: Set a new password for the administrator’s account. Add a new user account. Enter the user name for the new account. Enter the password for the n

  • D-Link DCS-4701E, 29D-Link DCS-4701E User Manual Section 3: Conguration Dynamic DNS DDNS allows you to access your camera using a domain name instead of an IP address. To do this, you will need to have an account with one of the DDNS services listed in the drop-down box on this page. Enable DDNS: Server Address: Host Name: User Name: Password: Timeout: Status: Select this checkbox to enable the DDNS function. Select your Dynamic DNS provider from the pull down menu or enter the server address manually. Enter the host name of the DDNS server. Enter the user name or e-mail used to connect to your

  • D-Link DCS-4701E, 45D-Link DCS-4701E User Manual Section 3: Conguration Advanced ICR and IR Here you can congure the ICR and IR settings. The IR (Infrared) Cut-Removable (ICR) lter can be disengaged for increased sensitivity in low light environments. Automatic: Day Mode: Night Mode: Schedule Mode: IR Light Control: O: On: Sync with ICR: Schedule: The Day/Night mode is set automatically. You can use the Sensitivity drop-down box to set when the camera will switch to Night mode. The text box to the right shows what lighting conditions are currently being dete

  • D-Link DCS-4701E, 24D-Link DCS-4701E User Manual Section 3: Conguration This wizard will guide you through a step-by-step process to congure your camera's motion detection functions. Click Next to continue. Motion Detection Setup Wizard Step 1 This step will allow you to enable or disable motion detection, specify the detection sensitivity, and adjust the camera’s ability to detect movement. You may specify whether the camera should capture a snapshot or a video clip when motion is detected. Refer to

  • D-Link DCS-4701E, 34D-Link DCS-4701E User Manual Section 3: Conguration Preset This screen allows you to set preset points for the ePTZ function of the camera, which allows you to look around the camera's viewable area by using a zoomed view. Presets allow you to quickly go to and view a specic part of the area your camera is covering, and you can create preset sequences, which will automatically change the camera's view between the dierent presets according to a dened order and timing you can set. Note: If your View window area is the

  • D-Link DCS-4701E, 57D-Link DCS-4701E User Manual Appendix A: Technical Specications System Management System Requirements for Web Interface  Browser: Internet Explorer, Firefox, Chrome, Safari Event Management  Motion detection  Event notication and uploading of snapshots/video clips via e-mail or FTP  Supports multiple SMTP and FTP servers  Multiple event notications  Multiple recording methods for easy backup Remote Management  Take snapshots/video clips and save to local hard drive  Conguration interface accessible via web browser D-ViewCam™

  • D-Link DCS-4701E, 11D-Link DCS-4701E User Manual Section 2: Assembly and Installation Waterproong Your Installation Step 1 Place the washer around the base of the Ethernet connector as shown. To waterproof your camera installation, follow the instructions below. Round Ethernet cable, a crimping tool, and RJ-45 plugs are required for this procedure. Step 2 Thread bare Ethernet cable through the waterproof connector as shown, then crimp an RJ-45 plug onto the cable.

  • 48D-Link DCS-4701E User Manual Section 3: Conguration SNMP Here you can set the SNMP settings for the camera, which allow for SNMP management of the camera. Enable SMNPv1, SNMPv2c: Read/Write Community: Read Only Community: Enable SNMPv3: Read/Write Security Name: Authentication Type: Authentication Password: Encryption Password: Read Only Security Name Enable this option to allow for

  • 39D-Link DCS-4701E User Manual Section 3: Conguration The Event Setup page includes 4 dierent sections. • Event • Server • Media • Recording 1. To add a new item server, media, event, or recording item click Add. A screen will appear and allow you to update the elds accordingly. 2. To delete the selected item from the server, media, event, or recording drop-down menus, clic

  • D-Link DCS-4701E, 23D-Link DCS-4701E User Manual Section 3: Conguration If you have a Dynamic DNS account and would like the camera to update your IP address automatically, Select Enable DDNS and enter your host information. Click Next to continue. Enter a name for your camera and click Next to continue. Congure the correct time to ensure that all events will be triggered as scheduled. Click Next to continue. If you have selected DHCP, you will see a summary of your settings, including the camera's IP addre

  • 15D-Link DCS-4701E User Manual Section 2: Assembly and Installation Step 4 Enter the Admin ID and password. When logging in for the rst time, the default Admin ID is admin with the password left blank. Click the checkboxes if you wish to change the admin ID and password for the camera, and enter the new ID and password you wish to use. Click Next to continue. Step 3 The Setup Wizard

  • 4D-Link DCS-4701E User Manual Section 1: Product Overview Product Overview Package Contents If any of the above items are missing, please contact your reseller. Safety Notice: Installation and servicing should be done by certied technicians so as to conform to all local codes and prevent voiding your warranty. DCS-4701E Vigilance HD Outdoor PoE Mini Bullet Camera Rubber Power Connector

  • D-Link DCS-4701E, 22D-Link DCS-4701E User Manual Section 3: Conguration Internet Connection Setup Wizard This wizard will guide you through a step-by-step process to congure your new D-Link Camera and connect the camera to the internet. Click Next to continue. Select how the camera will connect to the Internet. If your camera is connected to a router, or you are unsure how your camera will connect to the Internet, select DHCP Connection. Select Static IP if your Internet Service Provider has provided you with connection settings, or if you wish to set a static address within your home network. Enter the correct conguration information and click Next to continue. If you are

  • D-Link DCS-4701E, 38D-Link DCS-4701E User Manual Section 3: Conguration Event Setup In a typical application, when motion is detected, the DCS-4701E sends images to a FTP server or via e-mail as notications. As shown in the illustration below, an event can be triggered by many sources, such as motion detection. When an event is triggered, a specied action will be performed. You can congure the Network Camera to send snapshots or videos to your e-mail address or FTP site. To start plotting an event, it is suggested to congure

  • D-Link DCS-4701E, 28D-Link DCS-4701E User Manual Section 3: Conguration Enable QoS: Enable IPv6: Enable Multicast for stream: Enable Bonjour: Bonjour Name: Enabling QoS allows you to specify a trac priority policy to ensure a consistent Quality of Service during busy periods. If the Network Camera is connected to a router that itself implements QoS, the router's settings will override the QoS settings of the camera. Enabling this setting will enable use of the IPv6 protocol. Click the IPv6 Information button to see the camera's current IPv6 details, or you can check Manually setup the IP address to man

Related Products and Documents (Security Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Samsung 211MP Owner's instructions manual samsung/211mp-6BW.pdf 26 Nov 2022 36 1.9 Mb
2 Eureka AS1050 Series Quick start manual eureka/as1050-series-K69.pdf 26 Jun 2022 1 0.95 Mb
3 Schwinn 420 Elliptical - 2010 Model Assembly manual schwinn/420-elliptical-2010-model-AJ7.pdf 13 Jul 2023 40 4.39 Mb
4 MiLAN MIL-4650 Operation & user’s manual milan/mil-4650-HTG.pdf 01 Feb 2024 22
5 Jet DC-1100RC Brochure jet/dc-1100rc-DJG.pdf 11 Aug 2022 2
6 Da-Lite Advantage Specification data da-lite/advantage-185.pdf 09 Oct 2022 2 0.19 Mb

Similar Resources:

  • Sony

    O.S.D. WDR Series

    (12 pages)
    SERVICE MANUAL 1/3” SONY DSP COLOR CCD CAMERA O.S.D. WDR SERIES V.48_W_M The serial number of this product may be found on the bottom of the unit. You should note the serial number of this unit in the space provided and retain this instruction as a permanent record of your purchase to aid identification in the event of th …
  • 4xem

    4X-IP7160

    (2 pages)
    Indoor/Outdoor 2.0 MegapixelPoE Network Camera 4X-IP71602.0 Megapixel CMOS Image Sensor•Auto-iris Lens (Optional)•Real-time MPEG-4 and MJPEG Compression (Dual Codec)•Multiple Streams Simultaneously•ePTZ for Data Eciency•Time-shift Streaming for Recording Pre- and Post-event Video•Detects Tampering from Blockage, Redirection o …
  • COP

    15-CO20

    (3 pages)
    Instructions Tel: +44 (0) 1457 874 999 Fax: +44 (0) 1457 829 201 For more instructions & support material, please visit our website at: http://www.cop-eu.com …
  • Elvox

    46516.212.01

    (2 pages)
    46516.212.01IstruzioniUser manual 123Design sorgente di luce IR a lunga efficaciaAltri marchiDurata utileSensibilità IR1 anno 2 anno 3 anno 4 annoTelecamera Bullet IR AHD 720P, obiettivo 2,8-12 mmSPECIFICHEModello46516.212.01Sensore Sensore 720PPixel effettivi 1296(H) x 732(V)Frame rate video 25 …
  • Moog Videolarm

    RHW75CF2N

    (10 pages)
    TMBefore attempting to connect or operate this product,please read these instructions completely.81-IN5377R0www.videolarm.comRHW75CF2N / IRHW75CF2NOutdoor/Indoor Dome Housing Brackets and MountsInstallation and Operation Instructions for the following models:RHW75CF2N IP Network Ready 7” Vandal-Resistant Outdoor dome housing with wall mount, rugged …
  • urmet domus

    1096/204

    (8 pages)
    DS1096-003 MINICAMERA 1080P AHD DAY/NIGHT STARLIGHT NASCOSTA IN CONTENITORE RIVELATORE ANTIFURTO 1080P AHD DAY/NIGHT STARLIGHT MINICAMERA IN DUMMY PIR IM DIEBSTAHLDETEKTORGEHÄUSE VERBORGENE MINIKAMERA 1080P AHD DAY/NIGHT STARLIGHT MINICAMÉRA 1080P AHD DAY/NIGHT STARLIGHT CACHÉE DANS UN CONTENEUR DÉTECTEUR ANTIVOL MINI CÁMARA 1080P AHD DAY/NIGHT ST …

Security Camera Instructions:

Comments, Questions and Opinions: