D-MAX DIC-5830DV Manual 

Text of D-MAX DIC-5830DV User Guide:

• 2 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the

• D-MAX DIC-5830DV, 3 The camera needs periodic inspection. Contact an authorized technician for inspection. Stop using your camera when you find a malfunction. If you use your camera around smoke or unusual heat for a long time, fire may be caused. Do not Install the camera on a surface that can not support it. Unless the surface is suitable, it could cause falling or other hazards. Do not hold plug with wet hands. It could cause an electric shock. Do not disassemble the camera. It may result in fire, electric shock or other hazards. Do not us

• D-MAX DIC-5830DV, 4 1.Features --------------------------------- 6 2. Cable Connection & OSD Control --------------------------------- 7 3. Setup Menu Operation --------------------------------- 8 4. Troubleshooting --------------------------------- 19 5. Dimensions --------------------------------- 20 6. Specifications --------------------------------- 21 ■ Contents

• D-MAX DIC-5830DV, ☺Ultra High Resolution 650 TV Lines Clear image quality has been achieved by employing a double-speed SONY CCD with 410,000(effective) pixels, which provides a horizontal resolution of 650 TV lines. ☺Visual Distance & Smart IR It is 0.1lux at color mode and its LED will be lit at lower light enabling that observer could see object in the distance of 30M.(visible distance 30M) In addition, the Smart IR feature protects saturation when object is too close to the camera. ☺Electrical Day & Night (True Day & Night) The camera i

• D-MAX DIC-5830DV, 6 1) Cable Connection ( DC12V Type ) (Dual Type DC12/AC24V) 2) OSD Control ① 3AXIS BRACKET - Please loosen screws and fix tilted and panned position. ③ LENS : Vari-Focal Auto Iris Lens ( 2.8mm ~ 12.0mm / F1.2 ) with ICR OSD PCB - SETUP button : Used for the menu display. This button can be used to confirm settings after changing the value of the selected function or current conditions. - UP & DOWN buttons : Used for selecting items by moving the cursor up or down on the menu scre

• D-MAX DIC-5830DV, 7 • Menu Structure LENS DC / VIDEO / MANUAL EXPOSURE SHUTTER AUTO / FLK / MANUAL / 1/60 AGC LOW / MIDDLE / HIGH / OFF SENSE-UP AUTO / OFF RETURN BACK LIGHT OFF / DWDR / BLC / HSBLC WHITE BAL ATW / AWB / AWC-SET / MANUAL DAY & NIGHT AUTO / EXT / NIGHT / COLOR SMART 3DNR OFF / ON F-DNR OFF / MANUAL / AUTO FUNCTION MOTION OFF / ON PRIVACY OFF / ON D-EFFECT D-ZOOM / SAMART ZOOM / DIS / PIP / FREEZE / MIRROR / NEG. IMAGE IMAGE ADJ SHARPNESS / MONITOR / LENS SHADING / DEFECT COMM ADJ CAM TITLE SYNC LANGUAGE RETURN EXIT SAVE / CANCEL / RESET ① Please press the SETUP button Setting

• D-MAX DIC-5830DV, 8 wish to change mode. When the LEFT or RIGHT button is pressed, available values and modes are displayed in order. Please keep pressing the button until you get to the mode you wish to operate. ④ Please select 'EXIT' and then press the SETUP button to finish the setting. Note) • If arrow appears at the mode you wish to operate, it means that there is a sub-menu which can be selected by pressing the SETUP button. • If arrow appears at the mode item, it means that there is no mode available to be selected. 1. LENS This function is used to select the type of lens. DC: Select this mode in case of using DC

• D-MAX DIC-5830DV, 9 • LOW / MIDDLE /HIGH AREA: Select area and then adjust size and position of the area. DEFAULT: Initialize all data you set. ▶ DWDR When there are both bright and dark areas at the same time, this mode makes both areas distinctive. LOW LEVEL: Set lower level (0~15) HIGH LEVEL: Set High level (0~15) ▶ HSBLC GAIN: select gain value. MODE: select between night only mode and all day mode MASK LEVEL: select mask level. DEFAULT: Initialize all data you set. M.SKIP AREA: set exception area where HSBL MASK doe

• D-MAX DIC-5830DV, 10 Please select the mode you wish to operate by pressing the LEFT or RIGHT button. ▶ COLOR: The picture is always displayed in color. ▶ AUTO: The mode is switched to ‘Color’ in a normal environment, but switches to ‘B/W’ mode when ambient illumination is low. - DELAY: adjusting converting speed for COLOR ↔ BW - D→N: user can adjust luminous level to convert from Day to Night. - N→D: user can adjust luminous level to convert from Night to Day. ▶ EXT: This mode allows you to apply a desired filter to external signals. ▶ B/W: This mode allows you to apply a desired filter to external signals. BURST: If it

• 11 7. F-DNR (Defog) This camera supports DEFOG function which does a process of clearing blurred image caused by fog and snow by analyzing the brightness of input image and compensating the color of the image ▶ OFF: Deactivates F-DNR. ▶ F-DNR MANUAL This function is operated manually LEVEL: Select level ▶ F-DNR AUTO This function is operate

• D-MAX DIC-5830DV, 12 AREA: Select the programmed area that can be set up to 4 areas. AREA DISPLAY: Turn on and off the programmed motion area. VALUE: Adjust motion sensitivity of the programmed motion area. MOTION VIEW: Turn on and off the display when motion detected. ▶ OFF: Cancel Motion detection function. 2) PRIVACY (POLYGON) You may conceal specific area on the screen with this ‘PRIVACY’ function. AREA: Select the programmed privacy area (Area 1~8) AREA DISPLAY: Turn on and off the programmed privacy masking. Set position and area size for privacy masking using arrow COLOR: Setup color of the programmed motion area mask (1-15 color) TRANSPA

• D-MAX DIC-5830DV, 13 SHARPNESS: Adjust sharpness of the video picture MONITOR: Select the kind of the monitor (LCD / CRT) OSD COLOR: User can select OSD color ▶ CRT: Select this menu when using a CRT monitor. - PED LEVEL: Adjust PED level. - COLOR GAIN: Adjust COLOR GAIN ▶ LCD: Select this menu when using a LCD monitor - GAMMA: Adjust GAMMA level - PED LEVEL: Adjust PED level. - COLOR GAIN: Adjust COLOR GAIN LENS SHADING: When setting the zoom to maximum and Lens angle of view are saturated on screen, set ON to make the Lens edge invisible. It might happen only if fluorescent light is shined fully on screen. DEFECT: When the camera has white defect in the CCD with ages, user

• 14 phase of multiple cameras using the power synchronization function (Line-Lock) without using a synchronization signal generator. • INT : Internal Synchronization Type • L/L : Power Synchronization Type, Line-lock Press the SET button and you can select a desired phase between 0 and 359. synchronization. • When the power is DC 12V, the menu

• D-MAX DIC-5830DV, 15 If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. • Nothing appears on the screen. - Check that the power cord and line connection between the camera and monitor are fixed properly. - Check that you have properly connected VIDEO cable to the camera VIDEO output jack. • The image on the screen is dim. -Is lens stained with dirt? Clean your lens with soft, clean cloth. -Set the monitor to prope

• D-MAX DIC-5830DV, 17 ▪ GENERAL Signal system NTSC PAL Image Sensor 1/3” Sony HAD CCD∥ Total Pixels 811(H) Χ 508(V) 795(H) Χ 596(V) Effective Pixels 768(H) Χ 494(V) 752(H) Χ 582(V) Resolution 650 TV lines (B/W 0Lux) Scanning Frequency 15.734KHz(H), 60(V) 15.625KHz(H), 50(V) Shutter Speed 1/60 ~ 1/100,000 sec 1/50 ~ 1/100,000 sec Min. Illumination IR LED ON 0 Lux IR LED OFF 0.00001Lux (Sens-up 256x) IR LED Range Max. 30M (LED :30 PCS) Day & Night EXT / B/W / Color / A

Related Products and Documents (IP Camera):

Comparable Devices:

Similar Resources:

• ICI FMX 400 P Series (20 pages) FMX 400 P SERIES IR CAMERAUSER MANUALMedicalMedicalEdit Text Outlines2105 W. Cardinal Dr. Beaumont, TX 77705PLEASE READ THIS MANUAL BEFORE SWITCHING THE UNIT ON.IMPORTANT SAFETY INFORMATION INSIDE.ICI cameras fall under US Federal Law and Export Control.THIS DEVICE IS INTENDED FOR ADJUNCTIVE USE.NOT MEANT FOR STANDALONE DIAGNOSTICS.� …

• Vitek Transcendent Series (2 pages) 1OverviewComponents and AccessoriesCameraQuick GuideScrewsHex WrenchDrill TemplateRubber PlugWaterproof CapFocusZoomLensRJ-45 EthernetCVBS OutputAudio InputPower Input12345134522Network Cable & Power ConnectionsFirst connect the Waterproof Cap to an Ethernet patch cable, then connect the cameras ethernet adaptor. If not powering the camera with PoE, also …

• Eaton Crouse-Hinds GHG 72 Series (20 pages) Explosionsgeschützte Klemmenkästen aus Kunststoff GHG 72.Explosion protected terminal boxes made of plastic GHG 72.Boites de jonction GHG 72. en plastique pour atmosphères explosivesGHG 720 7001 P0001 D/GB/F (o)CROUSE-HINDSSERIESBetriebsanleitungOperating instructionsMode d’emploi …

• ALIBI ALI-BC1720LPC (4 pages) 1www.observint.comALI-BC1720LPC_CQ 12/8/15Mounting baseMounting screw holesCamera underside - mounting baseOptional ALI-AB4 mounting bracket for ALI-BC1720LPC camera (includes mounting fasteners)What’s in the box• Camera assembly• This installation and user guide TOOLS YOU NEEDTo install the camera, you will need:• 12 Vdc power source. See Speci� …

• urmet domus 1092 (16 pages)  DS1092-451 MICROCAMERA AHD 1080P DAY & NIGHT STARLIGHT OTTICA FISSA 3,6MM 1080P AHD MICROCAMERA STARLIGHT 3,6MM FIXED LENS BUILT-IN 1080P AHD MICROKAMERA STARLIGHT FESTOBJEKTV 3,6 MM MICROCAMÉRA 1080P AHD DAY & NIGHT STARLIGHT FESTOBJEKTV 3,6 MM MICROCÁMARA DÍA/NOCHE AHD 1080P STARLIGHT CON LENTE FIJA 3,6 MM INTEGRADA Sch./Ref./Typ/Ré …

• VADDIO RoboSHOT 12 (48 pages) © 2014 Vaddio - All Rights Reserved. RoboSHOT QCCU Systems - Document Number 342-0797 Rev A VADDIO™ ROBOSHOT™ SERIES CAMERAS RoboSHOT 12 and RoboSHOT 30, HD Robotic PTZ Camera Systems featuring the Quick-Connect™ Universal CCU Interface System Model and Part Numbers RoboSHOT 12 QCCU System, 999-9907-000 (No …

Comments, Questions and Opinions: