Century Helicopter Products NEO 600 Operation & User’s Manual

Text of Century Helicopter Products NEO 600 User Guide:

• Century Helicopter Products NEO 600, NEO 600 & 660 Page 2 INTRODUCTION Thank You Warning! Flight Checklist General Guidelines Pre-Assembly Information Thank you for purchasing the all new NEO 600/600 class of multi-rotor aircraft. By incorporating the latest designs and the possibilty of running on blade sizes from 10” to 12” propellers, the lifting capabilities and stability of the NEO 600 & 660 are unmatched. This R/C Multi Rotor is not a toy! It is a precision machine requiring proper assembly and setup to avoid accidents. It is the responsibil- ity of the owner to operate this product in a safe manner as it can inflict serious injury otherwise. It is

• NEO 600 & 660 Page 3 AMA RULES & REGULATIONS 1. Model aircraft will not be flown: (a) In a careless or reckless manner. (b) At a location where model aircraft activities are prohibited. 2. Model aircraft pilots will: (a) Yield the right of way to all man carrying aircraft. (b) See and avoid all aircraft and a spotter must be used when appropriate. (AMA Document #540-D-

• Century Helicopter Products NEO 600, NEO 600 & 660 Page 4 ARM ASSEMBLY (ARF Version Only) (ARF Version Only) 1 2 3 4 6 5 8 7 CNM3x6BHCS CNM3x30BHCS 4 19mm Pipe Plug(19mm 管塞) 6 1 2 6 No. Description Qty Part # 3 4 4 6 Century HWC 2212 M otor(X2212马达) L=13mm Aluminum Tube Holder(13mm 铝管固定座) 10-Inch Propeller( 10寸螺旋桨) CN2229 5 6 8 Black Motor Mounting Plate( 黑色马达固定板) 20x233 Black Aluminum Tube(233mm 长黑色铝管) 20x233 Golden Aluminum Tube(233mm 长金色铝管) Button Head Cap Screw( 圆头内六角螺丝)M3x30 CNM3x30BHCS Button Head Cap Screw( 圆头内六角螺丝)M3x6 CNM3x6BHCS CNMR6003 CNMR6005B CNMR6005G

• Century Helicopter Products NEO 600, NEO 600 & 660 Page 5 SWIVEL ARM ASSEMBLY (NEO 660) 3 4 5 5 6 7 1 2 CNM3x8BHCS CNM3x30BHCS CNM3x25FHCS CNM3x6BHCS 4 1 2 12 No. Description Qty Part # 3 4 4 5 24 3x10x1.5 Nylon washer(3x10x1.5 尼龙垫片) 6 12 Button Head Cap Screw( 圆头内六角螺丝)M3x30 CNM3x30BHCS Flush Head Cap Screws( 斜头内六角螺丝)M3x6 铝管固定座) Button Head Cap Screw( 圆头内六角螺丝)M3x8 CNM3x8BHCS 7 61mm Aluminum Post(61mm 铝柱) Button Head Cap Screw( 圆头内六角螺丝)M3x6 CNM3x6BHCS 4 4 L=22mmAluminum Tube Holder(22mm 8 1CNMR6024A Top & Bo

• Century Helicopter Products NEO 600, NEO 600 & 660 Page 6 ARM ASSEMBLY (NEO 600) 1 3 4 5 5 6 2 7 CNM3x8BHCS CNM3x30BHCS CNM3x6BHCS 16 1 2 4 No. Description Qty Part # 3 4 4 5 1 6 16 Button Head Cap Screw( 圆头内六角螺丝)M3x30 CNM3x30BHCS L=22mm Aluminum Tube Holder(22mm铝管固定座) Button Head Cap Screw( 圆头内六角螺丝)M3x8 CNM3x8BHCS 7 61mm Aluminum Post(61mm 铝柱) Button Head Cap Screw( 圆头内六角螺丝)M3x6 CNM3x6BHCS 1 4 Upper Frame Plate( 机架上固定板) Lower Frame Plate( 机架下固定板) CNMR6010 CNMR6024B CNMR6024B

• Century Helicopter Products NEO 600, NEO 600 & 660 Page 7 GPS SAVER (NEO 660) 1 2 3 M3x8 Nylon Screws(3x8 尼龙螺丝) 1 2 4 No. Description Qty Part # 3 GPS Protection Board (GPS保护板) 1 4 GPS Saver Plate ( GPS固定板) L=15mm Hex Nylon Column(15mm 长六角尼龙柱) 4 CNMR6010 CNMR6010 1 CNM3x8 4 CNMR6010 CNMR6010

• Century Helicopter Products NEO 600, NEO 600 & 660 Page 8 GPS SAVER (NEO 600) 1 2 3 4 CNM3x8 M3x8 Nylon Screws(3x8 尼龙螺丝) 1 2 4 No. Description Qty Part # 3 GPS Protection Board(GPS保护板) 1 4 GPS Saver Plate (GPS固定板) L=15mm Hexagon Nylon Post(15mm 长六角尼龙柱) 4 CNMR6010 CNMR6010 1 CNMR6010 CNMR6010

• NEO 600 & 660 Page 9 SOLDERING ESC TO DISTRIBUTION BOARD NEO 660 NEO 600 (ARF Version Only) (Optional item) 1 2 4 3 Solder the ESC’s as shown to the distribution board included with your NEO multirotor. Make sure the Positive (Red +) wire and the Negative (Black -) are correctly connected. 1 2 1 No. Description Qty Part # 3 DJIBEC 1 6 Power Cord(电源线) DJI BEC Wires (BEC 稳压器指

• Century Helicopter Products NEO 600, NEO 600 & 660 Page 11 LANDING GEAR ASSEMBLY 1 2 3 4 5 6 7 8 9 4 1 2 2 No. Description Qty Part # 3 2 4 8 Aluminum Strut 260 mm (260 mm 铝管 ) Lower Right T Joint (右下脚架) CNMR6015 6 7 Cross Boom Holder( 脚架固定座) CNM3x10ST CNMR6015 CNMR6015 Landing Gear Cross Boom 265mm ( 265mm管) CNMR6017 2 4 2 8 2 Upper Right T Joint (右上脚架) 5 Set Screw(无头内六角螺丝)M3x4 CNM3x4SS Upper Left T Joint (左上脚架) Self-tapping screws ( 自攻螺丝) Lower Left T Joint (左下脚架) 8 9 CNMR6015 1 2 3 4 4 No. Description Qty 1 2 Part # Landing Skid End (铝脚架管塞) Set Screw(无头内六角螺丝)

• Century Helicopter Products NEO 600, NEO 600 & 660 Page 12 LANDING GEAR AND ELECTRONICS (NEO 660) 1 1 1 6 1 No. Description Qty 1 2 3 4 5 Part # DJI GPS (Optional Parts) NAZA (Optional Parts) Naza 主控器 8 Ch Receiver 2.4G (Optional Parts) BEC & LED Indicator ( LED指示灯) CNE430M Multi Rotor Motor Speed Control (马达调速器) DJIBEC (Optional item) (Optional item) (Optional item) (ARF Version Only) (Optional item) 1 3 2 4 5 1 4 No. Description Qty 1 Part # Self-tapping Screw (脸捣 ) CNM3X10TS CNM3X10TS DJINZV2 DJINZM2GPS

• Century Helicopter Products NEO 600, NEO 600 & 660 Page 13 LANDING GEAR AND ELECTRONICS (NEO 600) 3 2 No. Description Qty 1 2 Part # Landing Gear Plate(脚架固定板) CNMR6021 Button Head Cap Screw( 圆头内六角螺丝)M3x14 CNM3x14BHCS 1 3 2 4 5 1 1 1 6 1 No. Description Qty 1 2 3 4 5 Part # DJI GPS (Optional) NAZA (Optional) ( 主控器) 8 ch Receiver 2.4G (Optional) BEC & LED Indicator (Optional) CNE430M DJINAZACTRL Multi Rotor Speed Control ( 马达调速器) DJIGPSMDL DJIBEC (Optional item) (Optional item) (Optional item) (Optional item) (ARF Version Only) 1 CNM3X10TS

• Century Helicopter Products NEO 600, NEO 600 & 660 Page 14 BUILD PHOTOS (USING NEO 600 AS EXAMPLE) Assemble the NEO 600 lower frame plate and aluminum threaded arm mounts. Turn over the lower frame plate and install the landing gear aluminum posts and distributing panel hex posts. Select type of battery connector (not includ- ed) and solder all ESC and DJI BEC on power distribution panel. It is optional to add a disconnect for the BEC for quick removal from the power distribution panel. Photo shows a completed power distribution board. Using short tube holder (#4) and motor mount- ing plate (#3) assemble the arm together. Install the power distribution board in between- the lo

• Century Helicopter Products NEO 600, NEO 600 & 660 Page 15 BUILD PHOTOS (USING NEO 600 AS EXAMPLE) Assemble the GPS saver cage together, and install on top of the upper frame plate. Attach the upper frame plate along with “GPS SAVER” to the lower frame assembly. The 1/4” camera mount hole indicates the front of the NEO Multi-Rotor. 12 13 14 Congratulations on finishing the build of the NEO Multi-Rotor. Please follow your instruction manuals on set- ting up your transmitter and electronics.

Related Products and Documents (Toy):

Comparable Devices:

Similar Resources:

• Eduard ZOOM 33 204 (4 pages) REMOVEODSTRANITOPTIONVOLBAREPLACENAHRADITBENDOHNOUTGRINDOBROUSITSYMETRICAL ASSEMBLYSYMETRICKÁ MONTÁŽDRILL HOLEVRTAT OTVORAPPLY EXPRESS MASK AND PAINT BEFORE GLUINGPOUŽÍT EXPRESS MASK NABARVIT PRED SLEPENÍMCOLORED ETCHED PARTSLEPTANÉ BAREVNÉ DÍLYETCHED PARTSLEPTANÉ NEBAREVNÉ DÍLYORIGINAL KIT PARTSPŮVODNÍ DÍLY STAVEBNICE?33 204111ORIGINAL KIT PA …

• VTech Winnie The Pooh Play n Learn Pooh (10 pages) © Disney Based on the “Winnie the Pooh” works by A.A. Milne and E.H. Shepard.Visit the Disney Website at www.disney.com/pooh© 2008 VTech Printed in ChinaPlay ’n Learn PoohPlay ’n Learn Pooh …

• THE WORLD MODELS P-51 MUSTANG EP 40 (16 pages) Wing SpanWing AreaFlying WeightFuselage Length49 in / 1250 mm434 sq in / 28 sq dm3.6 Ib / 1650 g43 in / 1090 mmSpecifications*Specifications are subject to change without notice.*INSTRUCTION MANUALP-51 MUSTANG EP (40)450W Motor SystemRequires: 5-channel radio w/ 5 mini servos, Outrunner Motor KM0374810, w/ Propeller Adaptor HW …

• Eduard BRASSIN P-47D wheels (2 pages) 648 484 648 484 P-47D wheels 1/48 scaleCOLOURSMr.COLORAQUEOUSGSi Creos (GUNZE)C 8H 8SILVERC137H77Mr.METAL COLORTIRE BLACK1/48for Tamiya kit - pro stavebnici Tamiyafor Tamiya kit - pro stavebnici Tamiya435 21 Obrnice 170Czech Republic0-144LDPE22PAP P-47D wheelswww.eduard.comR3 2pcs.R4 2pcs.R59,95 …

• NENKO 29108810 (3 pages) 1. Name of the product Interactive dog 2. Product code 29108810 3. Coloor As pictured. 4. Short description This amazing puppy not only looks lifelike, but it also has authentic sounds, a soothing heartbeat and feels like a real puppy! The dog has a nice soft coat. In addition, the puppy reacts to movement, but also to petting and cuddling …

• Top Flite Models SPITFIRE Mk IX (64 pages) WARRANTY.....Top Flite Models guarantees this kit to be free of defects in bothmaterial and workmanship at the date of purchase. This warranty does not cover any component partsdamaged by use or modification. In no case shall Top Flite‘s liability exceed the original cost of thepurchased kit. Further, Top Flite reserves the right to change or modify thi …

Comments, Questions and Opinions: