Brickcom Fixed Box Series Hardware User Manual

Text of Brickcom Fixed Box Series User Guide:

• Brickcom Fixed Box Series, 7 Chapter 3-LED Behavior Function LED Behavior Description Remark WPS WPS in progress Wireless Fixed Box Front Right (Blue) WPS WPS Connection Error Wireless Fixed Box Front Right (Blue) WPS Session overlap detected Wireless Fixed Box Front Right (Blue) WPS Steady on WPS Successfully Connected Wireless Fixed Box Front Right (Blue) Status Hardware failure Front Left (Green) Status Continuous Illumination 1. Restoring se

• Brickcom Fixed Box Series, 15 If using a non-PoE switch: Use a standard RJ-45 cable to connect the camera to a PoE Injector. Use a standard RJ-45 cable to connect the PoE Injector to the non-PoE switch. Use a standard power cable to connect the PoE Injector to a power outlet. Software Installation In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator" refers to the person who can config

• Brickcom Fixed Box Series, 14 5.3 Camera Connection Basic Connection (Without PoE) To attach external devices, such as sensors and alarms, connect them to the extension I/O terminal block. Connect the camera to a switch using an Ethernet cable. Connect the supplied power cable to the camera and plug it into a power outlet. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the specs of UTP Category 5 and not exceed 100 meters in length. When powering up, the power LED will l

• Brickcom Fixed Box Series, 27 If the camera supports the EasyLinkTM function, the following page will be displayed. Otherwise, this page will not be shown. *If desired, click <Skip> to skip this setting. EasyLinkTM is a unique Brickcom function which allows users to assign a unique EasyLink name to their network camera’s IP address. There is no need to configu

• Brickcom Fixed Box Series, 3 Before You Use This Product In many countries, there are laws prohibiting or restricting the use of surveillance devices. This Network Camera is a high-performance, web-ready camera which can be part of a flexible surveillance system. It is the user’s responsibility to ensure that the operation of this camera is legal before installing this unit for its intended use. Upon opening the product’s package, verify that all the accessories listed on the “Package Contents” are included. Before installing the Network Camera, read the warnings in the “Quick Installation Guide” to avoid misuse. When in

• Brickcom Fixed Box Series, 4 Regulatory Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

• Brickcom Fixed Box Series, 23 If Custom Setup type was used in the software installation and an EasyConfig icon was not installed on the desktop, the program will be installed under C:\Program Files\Brickcom\EasyConfig unless the program was saved to a preferred directory. Click <Start> to continue. The program will automatically search for the camera in the intranet. NOTE - Check �

• Brickcom Fixed Box Series, 1 Review History: 1. Separate User Manual into HW and SW. 2. Merge FB-100Ap/FB-100Ae/FB-130Np Series into this User Manual. Product name: Network Camera (Fixed Box series) Release Date: 2011/12 Manual Revision: V3.0 Web site: www.brickcom.com Email: [email protected] [email protected] © 2011 Brickcom Corporation. All Rights Reserved

• Brickcom Fixed Box Series, 11 Chapter 5- Installation 5.1 Hardware Installation Mounting the CS-Mount Lens to the Camera <Vari-focal Lens with Manual Iris> --- Optional Lens Connect the CS-mount lens to the camera by turning it clockwise onto the camera mount until it stops. If necessary, adjust the iris controller, focus controller, and zoom controller to get the best resolution. To adjust the lens: Adju

• Brickcom Fixed Box Series, 20 Select the features to install. Click <Next> to continue. Click <Change> to change the appointed folder where installation and program files will be stored. Click <Next> to continue.

• Brickcom Fixed Box Series, 12 <Vari-focal Lens with Auto Iris> --- Optional Lens Connect the CS-mount lens to the camera by turning it clockwise onto the camera mount until it stops. If necessary, adjust focus controller, and zoom controller to get the best resolution. Connect the lens cable plug (DC Iris control cable) to the camera side connector. To adjust the lens: The zoom controller can be manually adjusted to control the z

• Brickcom Fixed Box Series, 17 Select either “Complete” setup or “Custom” setup to install the system. If COMPLETE SETUP is selected: All program features will be installed into the default directory. Check the option “Complete” and then click <Next>. Click <Change> to change the appointed folder where installa

• Brickcom Fixed Box Series, 13 5.2 System Requirements Operating System: Microsoft Windows XP Home Edition SP2 Microsoft Windows XP Professional SP2 Computer: IBM PC/AT Compatible CPU: Pentium 3GHz or faster Memory: 1024 MB or more Monitor: 1024 x 768 pixels or more, 24-bit True color or better Network Interface: 10/100Mbps Network interface card must be installed Web Browser: Microsoft Internet Explorer 6.0 SP2 or

• Brickcom Fixed Box Series, 9 <Vari-focal Lens with Auto Iris> (DC Drive) --- CS Mount Extension I/O Terminal Block The Network Camera provides an extension I/O terminal block which is used to connect the camera with external input/output devices. The pin definitions are listed as below. DI/DO Diagram Pin Function 1 Power +5V 2 Digital Output 3 Digital Input 4 Ground

• 24 Select either “Simple Mode” or “Professional Mode” to obtain the camera’s IP settings. If “Simple Mode” is selected, EasyConfig will set up the connection automatically. If “Professio

• Brickcom Fixed Box Series, 5 Chapter 1- Package Contents Please check to make sure that the product package contains all the accessories listed below. a. Network Camera b. CS mount Lens (Optional) c. Product CD d. Camera Stand e. Warranty Card f. Allen Key g. Power Adapter (Optional) h. Easy Installation Guide i. Detachable Antenna (Optional)

• 16 In the Install Shield Wizard dialog box, click <Next> to continue. Read the End-User License Agreement and check the option “I accept the terms of the license agreement”. Click <Next>

• 25 There may be many cameras in the local network. Differentiate the cameras using their UPnP name. Double click on the camera from the survey list to connect. For configuring the IP address settings, se

• Brickcom Fixed Box Series, 10 Hardware Reset The Reset Button can be used to reboot the camera or restore it to factory default settings. If the camera experiences a problem, rebooting the camera may correct the problem. If the problem remains, please restore the camera to factory default settings and reinstall the software. To Reboot - Press and hold the Reset Button for one second using a paper clip or thin object. Wait

• Brickcom Fixed Box Series, 22 To launch EasyConfig or PC-NVR Standard, select the application and click <Finish>. When launching the PC-NVR program, please refer to the PC-NVR user manual. EasyConfig To launch EasyConfig, select EasyConfig from the start menu. If Complete Setup type was used in the software installation, an EasyConfig icon was installed on the desktop. Double click to open the icon.

• Brickcom Fixed Box Series, 6 Chapter 2- Fixed Box Network Camera Overview The Brickcom Fixed Box series offers a reliable and efficient solution for 24-hour video surveillance. The Fixed Box series offers highly efficient H.264 video compression, which reduces bandwidth and storage requirements without compromising image quality. M-JPEG and MPEG-4 are also supported for flexibility. With the megapixel progressive sensor and removable IR-cut Filter, this series delivers extremely clear and detailed images that CCTV cameras cannot offer. The internal SD/SDHC memory card slot allows for local storage, which prevents data loss if the data connection is lost.

• Brickcom Fixed Box Series, 8 Chapter 4- Device Appearance Description NOTE 1. The WPS buttons must first be enabled through the web GUI in order to work. See WPS page for details on how to enable the WPS Button. 2. (*) These are optional features. Please refer to the Product List for the full list of optional features

• Brickcom Fixed Box Series, 28 If “Static IP address settings” was selected, the failure page will be displayed as below: If the connection was successful, the user will see the message: “Congratulations. The installation of the camera is complete.” When this window is displayed, click <PC-NVR> to start the PC-NVR program, <Live View> to view the live video from the

• Brickcom Fixed Box Series, 19 To launch EasyConfig or PC-NVR Standard, select the application and click <Finish>. When launching the PC-NVR program, please refer to the PC-NVR user manual. If CUSTOM SETUP is selected: This option is recommended for advanced users. It can be used to install the system to a preferred directory or to select specific program feature(s). Check the option “Cus

• Brickcom Fixed Box Series, 2 Table of Contents Before You Use This Product ..................................................................... 3 Regulatory Information ............................................................................ 4 Chapter 1- Package Contents .................................................................... 5 Chapter 2- Fixed Box Network Camera Overview ........................................... 6 Chapter 3-LED Behavior ........................................................................... 7 Chapter 5- Installation ................................

More Instructions:

Brickcom Fixed Box Series Operation & user’s manual 19-03-2023 32

DOWNLOAD

Related Products and Documents (IP Camera):

Comparable Devices:

Similar Resources:

• POSline VE5850 (4 pages) Attention1. Where no switch hub is available, you can search and set up the camera using the network peering approach. However, you may need a jumper and need to change the LAN configuration on your PC for this purpose. It is recommended to request a qualified engineer for the connection or execute the network peering referring to …

• Cloud IPC2 (35 pages) Cloud Camera user manuals1IPCamera(HDCloudCamera)User'smanualMMooddeell::IIPPCC22Note:Toprotectyourprivacy,pleasemodifythedefaultpasswordafterlanding,andpleasetakegoodcareofyour� …

• DW PowerPix DWC-D3361WTIR (28 pages) 12132013ABOUT MANUALBefore installing and using the camera, please read this manual carefully.Be sure to keep it handy for future reference.Indoor Dome IR CameraDWC-D3361WTIR …

• VADDIO CLEARVIEW HD-20SE (18 pages) © 2015 Vaddio - All Rights Reserved. ClearVIEW HD-20SE HD PTZ Camera - Document Number 342-0933 Rev C VADDIO™ CLEARVIEW™ HD-20SE ClearVIEW HD-20SE High Definition, Robotic PTZ Camera Model Number 999-6980-000 (North America) Model Number 999-6980-001 (International) Model Number 999-6980-000AW (North America) Arctic White Camera Model Number 999-6 …

• Foscam FI8910W (48 pages) User Manual Model: FI8910W Indoor Pan/Tilt Wireless IP Camera NIGHT VISION & REMOTE PAN / TILT ROTATE/ TWO WAY AUDIO Color: Black Color: White …

• Fluke TiR32 (12 pages) Fluke TiR32 Thermal ImagerFluke TiR32 Thermal Imager (Work in Progress)T or infrared cameras are cameras that form an hermographic camerasimage using . IR cameras were originally developed for infrared radiationmilitary use and have slowly migrated into other fields as varied as medicine and archeology. In the building industry it has different usages, for …

Comments, Questions and Opinions: