blackloud I.C.E 360 Manual 

Text of blackloud I.C.E 360 User Guide:

• blackloud I.C.E 360, Quick Guide - 20 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interferenc

• blackloud I.C.E 360, Quick Guide - 12 Viewing Video Streams Once you have successfully connected your I.C.E 360, you are able to view video streams from your I.C.E 360 directly in the I.C.E app via the My Cameras menu. Simply launch the I.C.E app on your mobile device to enter the My Cameras menu. NOTE: If you had previously signed out of your I.C.E app account you will be prompted to re-enter your sign in information. NOTE: To ensure a successful video stream the connection for your I.C.E 360 should have an upstream/downstream bandwidth of at least 1.5

• blackloud I.C.E 360, Quick Guide - 18 Hardware Installation Installing the Stand Because your I.C.E 360 uses wide angle lenses to capture video, it is suggested that once you begin capturing video you install your I.C.E 360 on the stand supplied with your I.C.E 360 to ensure an elevated vantage point and thus a more complete view. To install your I.C.E 360 on the stand: 1 Place your I.C.E 360 on the stand ensuring that the screw hole at the bottom of your I.C.E 360 is mounted on the screw at the top of the stand. 2 Rotate your I.C.E 360 clockwise until it is secure on the stand. NOTE: Your I.C.E 360 can be installed on any standard camera stand/tripod featuring a 1/4”- 20 screw

• blackloud I.C.E 360, Quick Guide - 7 Getting Started Setting Up Your I.C.E 360 Installing the I.C.E App 1 On your mobile device, download and install the I.C.E app from either the Google Play Store or the iOS App Store by searching for the keyword “BLACKLOUD”. 2 From the I.C.E app sign in screen touch Create New Account. NOTE: If you have already created a BLACKLOUD account from a previously purchased BLACKLOUD product skip to “Connecting Your I.C.E 360”. 3 Enter a user name, email address, and password for your new account then touch Register. You will receive a verification email at the ema

• blackloud I.C.E 360, Quick Guide - 11 Getting Started Connecting Your I.C.E 360 via Bluetooth (For iOS Devices Only) The I.C.E app for iOS devices allows you to connect to your I.C.E 360 via a Bluetooth connection. To connect to your I.C.E 360 via Bluetooth: 1 Follow the instructions described in “Installing the I.C.E App” to download, install, and register the I.C.E app on your iOS device. 2 Enable Bluetooth on your iOS device. NOTE: For details on how to enable Bluetooth on your iOS device, please consult the user manual that came with your iOS device. 3 Follow the instructions described in steps 1 – 4 of “Connecting Your I.C.E 360” to sign in and begin connecting your I.C.E 360

• blackloud I.C.E 360, Quick Guide - 19 Safety • Before you begin using the device make sure you carefully read all safety notices and usage guidelines. Please preserve these safety notices and usage guidelines for future reference. • Do not attempt to disassemble the device. To avoid coming electric shock, do not remove any screws on the device or open any compartment. The user shall not be responsible for any repairs to the device, if any repairs are needed please contact qualified service personnel. • Do not allow the device to come into contact with water or liquids. Do not use the device in a

• blackloud I.C.E 360, Quick Guide - 9 Getting Started 5 Touch Set up by Wi-Fi in the pop-up window that appears. The I.C.E app will begin searching for your I.C.E 360. NOTE: For iOS devices the I.C.E app is also able to search for your I.C.E 360 via Bluetooth, for more information see “Connecting Your I.C.E 360 via Bluetooth”. 6 Once the I.C.E app has successfully found your I.C.E 360, the I.C.E app will enter the Add Camera screen to connect your I.C.E 360 to a Wi-Fi network. Ensure that your I.C.E 360 is within range of a Wi-Fi router that is

• Quick Guide - 22 More Information For more information on your I.C.E 360 and its various capabilities please check the user manual available on the company website: www.blackloud.com The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by BLACKLOUD is under license. Other trademarks and trade names are those of their respe

• blackloud I.C.E 360, Quick Guide - 5 LED Indicators The front of your I.C.E 360 features two LED indicators that notify you of the connection status of the camera when it is powered on. The following table describes the various statuses: Blue Indicator Red/Green Indicator Status On Green LED On Your I.C.E 360 is booting up. Off Red LED On Your I.C.E 360 is not connected to the internet. Off Red LED Blinking Your I.C.E 360 is configuring its settings. On Off Your I.C.E 360 is connected to the internet but not transmitting any data. Off Green LED On Your I.C.E 360 is connected to the internet and is transmitting data.

• blackloud I.C.E 360, Quick Guide - 3 Your I.C.E No. Item Description 1 Blue LED Indicator See the “LED Indicators” section below. 2 Red/Green LED Indicator See the “LED Indicators” section below. 1 2 3 4 5 6 7 8 9 10

• Quick Guide - 13 Viewing Video Streams No. Item Description 1 Camera List Displays the camera(s) that are available. The number of cameras listed are based on the number of cameras that have been added via the I.C.E app. NOTE: Swipe down on the camera list to refresh/update the list. 2 Add Button Touch to add another I.C.E 360 camera to the camera list using the steps described in “Co

• blackloud I.C.E 360, Quick Guide - 4 Your I.C.E 3 Front-Facing (Main) Camera The main camera for your I.C.E 360. New video streams start broadcasting from this camera. 4 Reset Button Resets your I.C.E 360 to default factory settings. Press and hold with a small pin for 5 seconds to perform a reset. 5 Microphone Captures and transmits audio to your mobile device. 6 Rear-Facing (Left) Camera Captures video from the rear of your I.C.E 360. 7 Speaker Broadcasts audio from your mobile device during two-way talk. 8 Rear-Facing (Right) Camera Captures video from the rear of your I.C.E 360. 9 Power Port Provides power to your I.C.E 360 when connected to the power cable and adapter. NOTE:

• Quick Guide - 10 Getting Started 8 During the connection process the red LED indicator on your I.C.E 360 will start flashing, indicating that your I.C.E 360 is configuring itself. Do not disconnect your I.C.E 360 from the power source during the configuration process. 9 When your I.C.E 360 has finished the configuration process the blue LED indicator will light up for a few

• blackloud I.C.E 360, Quick Guide - 6 Getting Started Powering On Your I.C.E 360 1 Plug your I.C.E 360 into a power socket using the USB power cord and power adapter. 2 Once your I.C.E 360 is plugged into the power socket the blue and green LED indicators will light up indicating that your I.C.E 360 is booting up. If you are powering on your I.C.E 360 for the first time, this process will take about 1 minute. 3 Once your I.C.E 360 has finished booting up the red LED indicator will light up (indicating that your I.C.E 360 is not connected to the internet), your I.C.E 360 is now

• blackloud I.C.E 360, Quick Guide - 17 Settings Change Wi-Fi: Allows you to change the Wi-Fi network/router that the camera is connected to using the steps described in “Connecting Your I.C.E 360”. HD Video: Toggles the resolution of the video stream between HD resolution and standard resolution. 3D Viewer: Toggles the camera view from a swipe-able 360-degree view to a static panorama view. Rename: Allows you to rename the camera. Volume: Allows you to adjust the volume of the two-way talk speaker located on the camera. Reboot: Restarts your

• blackloud I.C.E 360, Quick Guide - 15 Viewing Video Streams 2 Camera View • Displays the video captured by your I.C.E 360. • Swipe in any direction to change the viewing angle and obtain a 360-degree view of the camera’s surroundings. 3 Image Capture Button Touch to capture a still image from the video stream. NOTE: Captured image files will be stored in the “ICE” folder located in the photo gallery your mobile device. 4 Reset Viewing Angle Button Touch to return the camera view to the original front-facing camera viewing angle. 5 Level Viewing Angle Button Touch to adjust the camera view so that the viewing angle is level. 6 Mute Button Touch to mute/un-mute the sound from the video

• blackloud I.C.E 360, Quick Guide - 14 Video Streams Once you have selected a video stream (by touching a video stream preview) you will begin viewing a live stream from that respective camera. A video stream screen will open with multiple video options described below: 1 2 3 4 5 6 7 No. Item Description 1 Exit Button Touch to exit the video stream. Viewing Video Streams

• blackloud I.C.E 360, Quick Guide - 21 Safety FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or ope

• blackloud I.C.E 360, Quick Guide - 16 Settings When you touch the button for an individual camera from the My Cameras menu you will enter that camera’s settings menu. From the camera’s settings menu you are able to configure multiple settings for the camera: Camera: Toggles the video stream from the camera on and off. Alert: Allows you to control the sensitivity of the camera’s motion and sound sensors, which send alerts/notifications to your mobile device. NOTE: To toggle alerts on or off use the Alert button in the My Camera menu.

Related Products and Documents (IP Camera):

Comparable Devices:

Similar Resources:

• Zetronix zPen-HD (6 pages) zPen-HD Manual NOTICE The information in this manual is subject to change without notice. Zetronix Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages furnishing from the furnishing or use of this material. High Definition Spy Pen zPen-HD User M …

• Toshiba Surveillix IKS-WP816R (93 pages) 30875AC NETWORK CAMERA Model: IKS-WP816R User’s Manual If the URL changes, refer to www.toshiba.com For information on our latest products and peripheral devices, refer to the following web site: www.toshibasecurity.com …

• Axis P3304 (58 pages) USER’S MANUALAXIS P3301 Fixed Dome Network CameraAXIS P3301-V Fixed Dome Network CameraAXIS P3304 Fixed Dome Network CameraAXIS P3304-V Fixed Dome Network Camera …

• urmet domus 1092/270H (12 pages) + DS1092-364A BALL CAMERA AHD 1080P DAY & NIGHT 1/3” OTTICA 3,6MM CON LED IR 1080P AHD DAY & NIGHT BALL CAMERA 1/3” 3,6MM LENS WITH IR LED AHD 1080P TAG & NACHT KUGELKAMERA 1/3-ZOLL 3,6 MM-OBJEKTIV MIT IR-LEDS CAMÉRA MINI-DÔME AHD 1080P DAY & NIGHT 1/3” OPTIQUE 3,6 mm A DIODES IR CÁMARA MINIDOMO AHD 1080P DÍA/NOCHE 1/3” ÓPT …

• Planet ICA-HM230 (36 pages) H.264 Internet Camera&Internet Video ServerICA-HM230 / ICA-H312 / ICA-H651 / ICA-HM130 / ICA-HM135 / ICA-HM350 / ICA-H610 / IVS-H120Quick Installation GuideVersion 1.2 …

• Orion SC200 (6 pages) PROFESSIONALSuRvEILLANcE SYSTEMArlec Australia Pty. Ltd. ACN 009 322 105 (“Arlec”) gives the Warranty. Arlec’s telephone number, address and email address are:Customer Service: (03) 9982 5111 New Zealand Toll Free: 0800 003 329Building 3, 31 – 41 Joseph Street, Blackburn North, Victoria, 3130Blackburn North LPO, P.O. Box 1065, Blackburn North, 3130E …

Comments, Questions and Opinions: