Blade CG02+ 3-Axis Instruction Manual

Text of Blade CG02+ 3-Axis User Guide:

• Blade CG02+ 3-Axis, 2 EN WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this product in an

• Blade CG02+ 3-Axis, 3 EN • Always keep a safe distance in all directions around your model to avoid collisions or injury. This model is controlled by a radio signal subject to in- terference from many sources outside your control. Interference can cause momentary loss of control. • Always operate your model in open spaces away from full-size vehicles, traffi c and people. • Always carefully follow the directions and warnings for this and any optional support equipment (chargers, rechargeable battery packs, etc.). • Always keep all chemicals, small parts and any- thing electrical out of the reach of children. • Always avoid water exposure to all equipment not specifi ca

• Blade CG02+ 3-Axis, 4 EN Table of Contents Box Contents Box Contents ........................................................... 4 Technical Specifi cations ........................................... 5 Loading the CGO2 App to Your WiFi Smart Device ..... 5 Gimbal Components................................................. 6 Installing the Mounting Plate .................................... 7 Installing the Gimbal ................................................ 7 Routing the Wiring ................................................... 8 Connecting the Gimbal ............................................. 9 Transmitter Programming ......................................

• Blade CG02+ 3-Axis, 5 EN Technical Specifi cations Loading the CGO2 App to Your WiFi Smart Device Dimensions LxWxH (with lens): 3.00 x 101.62 x 129.12mm Weight: 163 g Working Voltage: 12V Wireless Frequency Range: North America: 5745MHz–5825MHz** Europe: 5180MHz–5240MHz** Lens Sensor: 16M Angle of view: 155° Controlled Rotation Range: Pitch Axis Control: –90°–0° Effective Pixels: 16 million White Balance: Automatic Focusing System: Fixed Microphone Onboard Storage Temperature: –20°–60°C Working Temperature: 0°–50°C • Download the free CGO2+ App to your smartphone or tablet at the iTunes App Store or Google Play Store. • Install

• Blade CG02+ 3-Axis, 7 EN Installing the Mounting Plate Installing the Gimbal The CGO2+ camera gimbal is compatible with 350 QX3 and Chroma ™ quadcopters. Install the appropriate mounting plate using the 3 included M2.5 x 10 screws. Do not overtighten. IMPORTANT: If you are mounting the CGO2+ to the 350 QX3, you must fi rst install the 350 QX3 tall landing gear (BLH8105). Install the gimbal by lining up the mounting rails of the gimbal and the mounting plate and pushing towards the rear of the plate as shown at left u

• Blade CG02+ 3-Axis, 8 EN Transmitter Programming Transmitter control of the pitch angle of the CG02+ is possible with most 6-channel and above Spektrum ™ transmitters. Control of the pitch angle in fl ight is achieved on the DX6i and DX6 by temporarily using the throttle control stick to adjust pitch. If you are using the DX7s, DX8, DX7, DX9 or DX18, pitch control is achieved via the rotary knob on your transmitter. To program your transmitter: DX6i • Set the Channel 6 (FLAP) Travel Adj. to 120 up and 100 down. • Set the values in the FLAP menu to 100 up and 100 down. To cha

• 9 EN DX7, DX9, DX18 In Channel Input Confi guration: • Assign Channel 7 Input (AUX2) to R Knob. • Assign AUX1 to A. In Servo Setup: • Set the AUX1 travel to the values below: 140 120 To change the gimbal angle, set switch A to position 0 and adjust the angle of the gimbal by rotating the R Knob at any time. ST10+ Personal Ground Station The ST10+ requires no additio

• Blade CG02+ 3-Axis, 10 EN Using the CGO2 App • With the CGO2+ powered on, open the WiFi settings on your smartphone or tablet and connect to the CGO2 GB network (CGO2 GB_******) using the password “1234567890”. • Open the CGO2 GB App on your device. You can now take still photos or start/stop recording video by using the on-screen controls on your device. It is possible to take still photos at any time, even while you are recording live video. Be sure to check for updates to the CGO2 App in the iTunes App Store, or Google Play Store. Using the CGO2+ With Your ST-10+ Personal Ground Station NOTICE: The ST-10+ transmitter is not compatible with any receiver equipped with Spektrum ™ D

• Blade CG02+ 3-Axis, 11 EN LED Codes Green Blue YellowRed Initializing.................................................................. Ready to connect to WiFi ........................................... Video recording ......................................................... SD card error ............................................................ WiFi error .................................................................. Use the buttons on the top of the ST-10+ to control the camera functions and the left slider to control the vertical angle of the camera gimbal. Video Start / Stop Button Photo Button Camera Tilt Slider

• Blade CG02+ 3-Axis, 12 EN Troubleshooting Problem Possible Cause Solution The gimbal vibrates after switching ON Gimbal did not initialize correctly or was obstructed Re-initialize with the gimbal clear of obstructions Gimbal does not respond to control input Gimbal did not initialize Keep the quadcopter and gimbal level and immobile for 5 seconds after switching ON Gimbal is not ON Incorrect gimbal connections Correctly connect gimbal Gimbal does not respond to transmitter Incorrect transmitter set up Review transmitter programming section and make corrections to transmitter set up Gimbal does not respond to control inputs. RED and BLUE LEDs are solid Incorrect gimbal connections Correctly

• Blade CG02+ 3-Axis, 13 EN Limited Warranty What this Warranty Covers Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product purchased (the “Product”) will be free from defects in materials and workmanship at the date of purchase. What is Not Covered This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modi cation of or to any part of the Product, (iv) attempted service by anyone other than

• Blade CG02+ 3-Axis, 14 EN Inspection or Services If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels,

• 15 EN Service Contact Information Country of Purchase Horizon Hobby Contact Information Address United States of America Horizon Service Center (Repairs and Repair Requests) servicecenter.horizonhobby.com/ RequestForm/ 4105 Fieldstone Rd Champaign, Illinois, 61822 USA Horizon Product Support (Product Technical Assistance) www.quickbase.com/db/ bghj7ey8c?a=GenNewRe

• 16 EN Compliance Information for the European Union Instructions for disposal of WEEE by users in the European Union This product must not be disposed of with other waste. Instead, it is the user’s responsibility to dispose of their waste equipment by handing it over to a designated collections point for the recycling of waste electrical and electronic equipment. The separate co

• Blade CG02+ 3-Axis, ©2015 Horizon Hobby, LLC. Blade, Chroma, DSM, DSM2 and DSMX are trademarks or registered trademarks of Horizon Hobby, LLC. iTunes is a trademark of Apple, Inc. Registered in the U.S. and other countries. Google is a registered trademark of Google, Inc. All other trademarks, service marks or logos are property of their respective owners. Created 05/15 49846 BLH8621

Related Products and Documents (Digital Camera):

Comparable Devices:

Similar Resources:

• FujiFilm Instax mini 7S (2 pages) 111 12 22 3 4本機只能使用富士即影即有膠片（馬上看軟片）"instax mini"（不能使用其他類型膠片。）∗ 膠片盒中有 1 張黑色膠片覆片和 10 張 膠片。∗ 膠片盒要在即將裝入照相機之前從內裝袋 內取 出。Film / Film / Film / Película / 膠片 / 필름BB20414-100Batteries / Batterien / Pi …

• Pioneer DVD (65 pages) Installation GuideInstallation GuideRegister your Recorder at www.pioneerelectronics.com4.7We are dedicated to providing you with quality support and customer service. If you have questions or difficulties, we would like to hear from you.TROUBLESHOOTINGCheck the Troubleshooting section of this document and of the User's Guide that came with your Recorde …

• Teledyne P3-80-12k40-00-R (91 pages) Piranha 3 Camera User’s Manual P3-80-12k40-00-R P3-80-08k40-00-R P3-87-12k40-00-R P3-87-08k40-00-R 8k to 12k Line Scan CCD Cameras 7-Jun-11 03-032-10216-06 www.teledynedalsa.com …

• Samsung ST600 (40 pages) User ManualBasic OperationST600This User Manual has been specially designed to guide youthrough the basic functions and features of your device.Please read this User Manual and the User Manual on theCD-ROM carefully to ensure safe and correct use.For more information, refer to the User Manual included on the supplied CD-ROM.ENG / TURST600_QSM_TUR.indb 3 20 …

• SVP DC-8690 (1 pages) DC-8690 8.0 Mega Pixels Max, 3MP CMOS Sensor, 4X Digital Zoom, 1.5" TFT-LCD Specification Image Sensor Micron CMOS Sensor 2048 x 1536 Storage Media Built-in 16M Flash Memory SD/MMC Card Slot Support, can be expanded up to 512MB Sensor Sensitivity Auto Lens F/2.8, f=8.46mm Fixed Focus Lens Focus Range Normal: 1.1m ~ Infinity; Macro: 17 ~ 22cm …

• Radio Shack 15-1586 - Digital Optical Selector (4 pages) © 2000 Tandy Corporation.All Rights Reserved.RadioShack and RadioShack.com are registered trademarks used by Tandy Corporation.OWNER’S MANUAL — Please read before using this equipment.4-Way Digital Optical SelectorYour RadioShack 4-Way Digital Optical Selector lets you con-nect up to four optical home or portable audio componentssuch as a digital receiv …

Comments, Questions and Opinions: