Manualios.com

Blizzard Lighting Kontrol 6 skywire Owner's Manual

Blizzard Lighting Kontrol 6 skywire Manual Online:

3.3, 642 votes
Blizzard Lighting Kontrol 6 skywire User Manual
Blizzard Lighting Kontrol 6 skywire User Guide
Blizzard Lighting Kontrol 6 skywire Online Manual

Text of Blizzard Lighting Kontrol 6 skywire User Guide:

  • Blizzard Lighting Kontrol 6 skywire, Page 2 KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC TABLE OF CONTENTS 1. GETTING STARTED 3 1.1 What’s In The Box? 3 1.2 Getting It Out Of The Box 3 1.3 Powering Up! 3 1.4 Getting A Hold Of Us 3 IMPORTANT SAFETY INSTRUCTIONS 4 1.5 Instructions on Our Instructions 4 2. INTRODUCTION 5 2.1 Features 5 2.2 General Overview 5 2.3 Nifty, Spiffy Diagram (front)

  • Blizzard Lighting Kontrol 6 skywire, Page 3 KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC 1. GETTING STARTED 1.1 What’s In The Box? • 1x KONTROL 6 Skywire™ DMX Controller • 1x 9VDC, 300ma (minimum) AC/DC Adaptor • A Warranty Card & Warranty Info • This Lovely User Manual 1.2 Getting It Out Of The Box We could tell just by lookin’ atcha. You’re a bit of a control freak, aren’t ya? Just kid- ding! CONGRATULATIONS! You’ve purchased a GREAT little DMX controller! Bravo! Now that you’ve got your KONTROL 6 Skywire™, you should carefully unpack the box and check the contents to ensure that all parts are present

  • Blizzard Lighting Kontrol 6 skywire, Page 4 KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC IMPORTANT SAFETY INSTRUCTIONS • Please keep this User Guide for future use. If you sell the unit to someone else, be sure that they also receive this User Guide. • ALWAYS make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the xture. • This product is intended for indoor use only. • To prevent risk of re or shock, do

  • Blizzard Lighting Kontrol 6 skywire, Page 5 KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC 2. INTRODUCTION 2.1 Features • DMX512/1990 Standard • 2.4Ghz built-in wireless DMX transmitter • 512 auto-assigning frequencies in 7 groups • 18 preset scene/color banks, 9 per page • Record up to 18 chases with up to 200 scenes per chase • 6 sliders for direct control of channels • Built-in microphone for music mode • Auto mode program controlled by fade time sliders • DMX out: 3-pin XLR • LED information display

  • Blizzard Lighting Kontrol 6 skywire, Page 6 KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC Number Button/Fader/Connection Does... 1 Fixture Select Buttons Fixture selection. 2 Fixture Indicator LEDs Indicates the xture(s) currently selected. 3 Scene Select Buttons / LEDs Universal bump buttons representing scene location for storage and selection. 4 Chase Select Buttons / LEDs Universal bump buttons representing chase location for storage and selection. 5 Channel Faders Adjusts DMX values - Channel 1-5 may be adjusted after pressing the respective xture select button. 6

  • Blizzard Lighting Kontrol 6 skywire, Page 7 KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC 2.5 Common Terms The following are common terms used in intelligent light programming, so pay attention! We’ll be using them throughout the manual. • Blackout is a state by where all lighting xtures light output are set to 0 or off, usually on a temporary basis. • DMX-512 stands for Digital MultipleX is an industry standard digital communication protocol used in entertainment lighting equipment. For more information read the DMX Primer and DMX Control Mode Sections later in the manual. • Fixture refer

  • Page 8 KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC 3. OPERATING INSTRUCTIONS 3.1 Setup 3.1.1 Setting Up The System Plug the AC to DC power supply to the system back panel and to the mains outlet. Plug in your DMX cable(s) to your intelligent lighting as described in the xtures respective manual. For a quick lesson on DMX see the DMX Pri

  • Blizzard Lighting Kontrol 6 skywire, Page 9 KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC 3.1.4 Resetting The System WARNING: This will reset the controller to its factory defaults. ALL PRO- GRAMS AND SETTINGS WILL BE ERASED! 1. Turn the unit off. 2. Press and hold <EDIT/REC>, <RUN MODE> & <DEL/CLEAR> 3. Turn the unit on while you continue to hold <EDIT/REC>,<RUN MODE> & <DEL/CLEAR> 4. The display will read rESr, then ot, then u2.0, then D000. At that point, release all 3

  • Blizzard Lighting Kontrol 6 skywire, Page 10 KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC 4. All LEDs will ash 3 times, and the LED indicator for the selected scene will now remain off. The scene has been deleted. 5. Repeat steps 2-4 to delete additional presets if desired. 6. Hold <EDIT/REC> for 3 seconds to exit programming mode. The LED indicator above the <EDIT/REC> button will extinguish. 3.4 Chase Programming A chase is a sequence of different scenes or steps which are called one after another. KONTROL 6 can store up to 18 programs of 200 scenes each. 3.4.1 Creating A New Chase 1. Enter programming mode as described in Section 3.2.1. 2. Using the <CHASE 1-9&g

  • Blizzard Lighting Kontrol 6 skywire, Page 11 KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC read FULL. 11. Hold <EDIT/REC> for 3 seconds to exit programming mode. The LED indicator above the <EDIT/REC> button will extinguish. 3.4.3 Deleting a Chase Step 1. Enter programming mode as described in Section 3.2.1. 2. Using the <CHASE 1-9> button, select the chase you wish to modify. 3. Press the <INSERT/TAP> button. The LED indicator will illuminate and the current step will display on the LED display. If there are no steps in the chase, the display will read ST00. 4. Use the <LEFT/RIGHT> buttons to select the step to delete. 5. Press the <

  • Page 12 KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC 1. Ensure that BLACKOUT mode is not selected, IE that the LED indica- tor above the <BLACKOUT> button is not lit. 2. Select the desired scene page using <SCENE PAGE A/B>. 3. Press <CHASE 1-9> to run a chase directly. The corresponding LED indicator will illuminate. 4

  • Blizzard Lighting Kontrol 6 skywire, Page 13 KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC 2. Press the <RUN MODE> button until the LED indicator for MANUAL mode is illuminated. 3. Using the <LEFT/RIGHT> buttons, move through the steps in the selected chase. 3.5.4 Playback Override Allows the user to manually override the current output while in Color/Scene Preset or Chase Playback Mode. 1. Ensure that BLACKOUT mode is not selected, IE that the LED indicator above the <BLACKOUT

  • Blizzard Lighting Kontrol 6 skywire, Page 14 KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC 3.6 USB Functions KONTROL 6 is capable of saving/loading scene and chase data from USB drives, using the USB jack on the unit’s front panel. During USB operation, KONTROL 6’s LED display will show the following information, depending on mode. LED Display Means... SAvE Indicates KONTROL 6 is currently in Data Backup/Save Mode. LoAd Indicates KONTROL 6 is currently in Data Load Mode. UP-- Indicates KONTROL 6 is currently in Firmware Update Mode. Ft01-Ft16 Displays the current le number to be written/loaded ot “OK,” indicates that the

  • Page 15 KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC WARNING: AFTER STARTING FIRMWARE UPGRADE, DO NOT POWER DOWN KONTROL 6 UNTIL THE UPGRADE FINISHES!!! UNPLUG ALL FIXTURES FROM KONTROL 6 PRIOR TO PROCEEDING. 1. Turn the unit off. 2. With the unit off, press and hold the <EDIT/REC> & <LEFT> but- tons. 3. Continu

  • Blizzard Lighting Kontrol 6 skywire, Page 16 KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC 3.7.1 Setting Up Skywire™ Wireless DMX 1. Plug the receiver into the “DMX IN” connector of the xture and verify it is receiving power (the STATUS LED should illuminate.) 2. Turn on the “WD” wireless DMX power power switch on the back of the con- troller and verify it is receiving power (the STATUS LED should illuminate.) 3. Press the RECESSED SELECTOR BUTTON on the back of the controller to select the operating channel group. (The system will store this setting for future use) The 7-Color Status LED will change color to indicate the current channel group: · GROUP 1: RED · GROUP 2: GR

  • Blizzard Lighting Kontrol 6 skywire, Page 17 KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC 4. APPENDIX 4.1 A Quick Lesson On DMX DMX (aka DMX-512) was created in 1986 by the United States Institute for Theatre Technology (USITT) as a standardized method for connecting lighting consoles to light- ing dimmer modules. It was revised in 1990 and again in 2000 to allow more exibility. The Entertainment Services and Technology Association (ESTA) has since assumed control over the DMX512 standard. It has also been approved and recognized for ANSI standard classication. DMX covers (and is an abbreviation for) Digital MultipleXed signals. It is the most com- mon com

  • Blizzard Lighting Kontrol 6 skywire, Page 18 KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC 4.2 Keeping Your KONTROL 6 As Good As New The KONTROL 6 you’ve received is a rugged, tough piece of pro lighting equipment, and as long as you take care of it, it will take care of you. That said, like anything, you’ll need to take care of it if you want it to operate as designed. You should absolutely keep the unit clean, especially if you are using it in an environment with a lot of dust, fog, haze, wild animals, wild teenagers or spilled drinks. Cleaning the surface routinely with a suitable cleaner is useful for keeping th

  • Page 19 KONTROL 6 Skywire Manual Rev. A Copyright © 2014 Blizzard Lighting, LLC 4.5 TECH SPECS! Weight & Dimensions Length 10.2 inches (255 mm) Width 5.6 inches (142 mm) Height 2.75 inches (69.5 mm) Weight 3.25 lbs (1.5 kg) Power Operating Voltage 9-12 VDC, .3A (From included power supply) Thermal Max. Operating Temp. 104 degrees F (40 degrees C) ambient Control P

Related Products and Documents (Network Router):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Compaq Presario SR5600 - Desktop PC Setup poster compaq/presario-sr5600-desktop-pc-696.pdf 29 Jun 2022 1 2.09 Mb
2 LG 245 Manual del usuario lg/245-XNN.pdf 31 Aug 2022 102
3 CLASSÉ AUDIO SSP-30 MKII Owner's manual classe-audio/ssp-30-mkii-4S1.pdf 13 Aug 2023 32 1.27 Mb
4 3Com 3C421600A Installation manual 3com/3c421600a-673.pdf 03 Oct 2022 6 0.1 Mb
5 LG 37LD330H Commercial mode setup manual lg/37ld330h-DJ8.pdf 12 Nov 2023 50
6 Alpine NVE-N055PV Owner's manual alpine/nve-n055pv-62I.pdf 10 Dec 2023 23 0.66 Mb

Similar Resources:

  • ASUSTOR

    ASW205T

    (2 pages)
    Switch’nstor | ASW205T5 port 2.5GBASE-T unmanaged Ethernet switchQuick Installation GuideAdapter x4Type AType CType IType GAC adapterFoot padsQuick Installation GuideScrewsAnchorsAC adapterAC adapter comes with four adapters that cover a wide variety of countries.To install, press the socket adapter and rotate.Diagrams are also located on the AC adapter. …
  • Cisco

    WAP54GP - Wireless-G Access Point

    (16 pages)
    Quick Start Guide Cisco Small BusinessWRV210 Wireless-G VPN Router with RangeBooster Package Contents• WRV210 Router• Ethernet Cable• Power Adapter• Product CD-ROM• Quick Start Guide …
  • H3C

    S5120-EI Series

    (177 pages)
    H3C S5120-EI Series Ethernet Switches Fundamentals Command Reference Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Software version: Release 2208 Document version: 6W100-20101224 …
  • NETGEAR

    DG834G

    (166 pages)
    202-10006-01202-10006-01October 2003NETGEAR, Inc.4500 Great America Parkway Santa Clara, CA 95054 USAPhone 1-888-NETGEARReference Manual for the 54 Mbps Wireless ADSL Firewall Router DG834G …
  • NETGEAR

    C6300v2

    (2 pages)
    Quick StartAC1750 WiFi Cable Modem RouterModel C6300v2© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only.Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at comm …
  • Patton electronics

    4900 Series

    (76 pages)
    SmartNode 4900IpChannel Bank User ManualSales Office: +1 (301) 975-1000Technical Support: +1 (301) 975-1007E-mail: [email protected]: www.patton.comPart Number: 07MSN4900-GS, Rev. IRevised: June 22, 2012 Start InstallationFor Quick …

Comments, Questions and Opinions: