Manualios.com

BLUGUARD XIMPLE Operation & User’s Manual

BLUGUARD XIMPLE Manual Online:

3.85, 681 votes
BLUGUARD XIMPLE User Manual
BLUGUARD XIMPLE User Guide
BLUGUARD XIMPLE Online Manual

Text of BLUGUARD XIMPLE User Guide:

  • BLUGUARD XIMPLE, 14 How to add accessories • Click + on top-right of the screen. • Scan the bar code or QR code printed on accessories with phone’s camera. • Name the accessory. • Set the trigger modes or other properties as you need, then save. Tips: When pairing with Smart Switch or Wireless Siren, please power it up before saving pairing settings.

  • 1 P3 P7 P21 P22 P23 P26 ● Get ready and power on ● XIMPLE App [Setting by smartphone] ● FAQ ● Appendix1: Accessory installing ● Appendix2: XIMPLE Sight IP Camera settings ● Appendix3: Product specification lists MENU The screenshots and texts might be different from the version you’re using. Please refer to the latest one.

  • BLUGUARD XIMPLE, 12 How to use the Easy Control Panel • Arm: All accessories under none “Disable” status are on arm. • Home arm: Only the accessories on "Instant" or "24 Hours" mode are on arm. • Disarm: Only “24 Hours”mode accessories are on arm. System will alarm when one or more accessories on arm is triggered. Navigator Swap to switch between menus. The other two menus are [Accessories and Device Info] and [Settings] Easy Control Panel Arm, Disarm, Home Arm, SOS, Etc. Accessories QuickView The fastest way to use your accessories.

  • 4 Power Light & Exit Delay Button Work with the main panel 1/3 LED Monitor • The XIMPLE uses MicroUSB as the power cable interface . • You can easily recharge it via any MicroUSB cable. Control Button Press to enter the settings menu. Press to select. Press to navigate. Press to go back. Child Lock Lock: Long-press

  • BLUGUARD XIMPLE, 23 Appendix2: XIMPLE Sight settings 1/3 Pairing with XIMPLE • Please use XIMPLE App to scan the QR code to pairing XIMPLE Sight. • The QR code is printed on the bottom of XIMPLE Sight. Insert LAN cable and power up • Please always connect XIMPLE Sight with LAN before powering up when you first using it. • Make sure the the settings like DHCP Server and UPNP are enabled on your router. • Connect the power cable, the XIMPLE Sight will run some diagnostic processes like rolling the camera. When it stops rolling, the startup is completed. Watch live video by XIMPLE App • Tap XIMPLE Sight listed in the XIMPLE App. • You might need to install a plugin in t

  • 25 Appendix2: XIMPLE Sight settings 3/3 - FAQ I’ve already connect my XIMPLE Sight with LAN, but I can’t connect to it in XIMPLE App. Please make sure your router has successfully connected to Internet. DHCP Server/Service should be Enable on the router. UPNP should be Enable too. You phone’s data plan should be available. Some carriers restricts the p

  • BLUGUARD XIMPLE, 18 Advanced settings and other features 1/3 Emergency Contact: Up to 6 contacts for setting. Alarm Clock: Up to 4 clocks for setting, with 4 modes each. Temperature Setting: An informing SMS would be received when surrounding temperature is out of the safe range you set. Knock Over to SOS: Punch or knock over the main panel to trigger SOS when the switch is ON. (Strongly recommended to those live alone) Ready to ARM: Needs to work with door/window sensors. The system will inform you to check and

  • BLUGUARD XIMPLE, 8 Initializing by XIMPLE App • Make sure your smart phone is online. • Tap XIMPLE App icon. • You can download XIMPLE App from both App Store or Google Play, or visit our download page listed above from your phone. • XIMPLE App supports global languages • Choose Auto Detect to use the phone’s current language. www.bluguard.com.my/ximple About languages • There is a build-in default language pack on App. It will automatically check and fetch the latest available language files, or use the latest saved language pack or default one. • You don’t have

  • BLUGUARD XIMPLE, 15 Setting by smartphone Manage and operate XIMPLE Sight IP Camera 1/3 • Like adding accessories, tap + to scan QR code on camera then name it. • If you want to be informed to check the real-time video (like the camera facing the door) when alarm is trigger by certain accessory (like the door/window sensor installed on the front door), you can use [inform when … alarms:] and tick the related accessories. • You would be asked to install a video plug-in the first time visiting to the camera. It won’t bother you anymore.

  • BLUGUARD XIMPLE, Ximple, Ximple Sight and Bluguard are trademark of Archtron R&D co., Ltd. ©2015. All rights reserved. Website : www.bluguard.com.my E-mail : [email protected] Wireless Alarm www.bluguard.com.my/ximple

  • BLUGUARD XIMPLE, 17 Setting by smartphone • The auto-capture feature only works on Android® phones. No Yes ATTENTION: An alarm message is received. Check the live video from your XIMPLE Sight now? Manage and operate XIMPLE Sight IP Camera 3/3 1. If a thief intrudes and triggers some acces- sory alarm, the emergency contacts would get informing SMS and alarming call right after that. 2. XIMPLE App captures the informing SMS right after that and reminds the user to check live video from the camera paired before. Users get informed immediately even when the App is exited. 3. Just one

  • BLUGUARD XIMPLE, 29 Remote Controller Parameters • Working Voltage DC 6V • Battery 2 × CR2016 button battery (3V) • Working Current 7.5mA • Standby Current 0mA • Transmission Distance Without obstacle 100m • Transmission Frequency 433.29MHz • Working Temperature -10 ℃ ~40 ℃ • Humidity ≤90%rh (non-condensing) • Weight 16.0g (battery included) • Dimension 58.0mm*33.1mm*11.0mm L*W*H(±0.1mm)

  • BLUGUARD XIMPLE, 20 Advanced settings and other features 3/3 Logs & Events: List recent arm, disarm and alarm records. • Security Accessory’s Trigger Mode: Show names of paired accessories and their trigger modes. • Remote Controller List: Show names of paired remote controllers. • XIMPLE Sight List & Linking Status: Show all paired XIMPLE Sights’ names and their linking accessories status. • Smart Switch List: Show all paired Smart Switch. Sim Card Balance: Check the balance by sending query SMS to local carrier from XIMPLE. System Status: Check current time, arm sta

  • BLUGUARD XIMPLE, 27 Wireless Motion Sensor Parameters • Working Voltage DC 3V • Battery 2 × AA battery(1.5V) • Working Current 22mA • Standby Current 60μA • Detective Range 110° • Detective Distance 9m • Transmission Distance Without obstacle 100m • Transmission Frequency 433.29MHz • Working Temperature -10  ~40  • Humidity ≤90%rh (non-condensing) • Weight 66g (battery not included) 112g (battery included) 62.3g (Bracket) • Dimension 99.6mm*54.0mm*40.2mm L*W*H(±0.1mm)

  • BLUGUARD XIMPLE, 6 Work with the main panel 3/3 Alarm Clock Check all working alarm clocks set by XIMPLE APP. ºC / ºF Switch Switch the temperature scale between Fahrenheit and Celsius. Screen Timeout Set the screen saving time.

  • BLUGUARD XIMPLE, 13 Setting by smartphone How to add emergency contacts • Slide softly on Main Panel, switch to [Accessories and Device Info] menu. • Click [Emergency contacts]. Up to 6 emergency contacts are for settings. Tap any of them for editing. • The XIMPLE calls and texts to emergency contacts when alarming. You can decide which informing message to receive. • Please set your cellphone number as the 1st emergency contact. Because only the first one could receive arming notification . ** Press ** to monitor and talk via phone to main panel. 88 Press 88 to listen again. ## Press  to cancel SOS. Hang up to call the next

  • BLUGUARD XIMPLE, 5 Work with the main panel 2/3 08:18 18 °c Wednesday, September 15 Signal Bars Indicate the GSM signal strength. Battery Life Indicate the remain battery life when AC power is OFF. Arm All active sensors can trigger alarm. Home Arm Only those on Home mode stop trigger alarm. Alarm Clock Status Indicate one or more Alarm Clock has been set. Real-time Temperature The temperature surrounding main panel. Users can change ºC or ºF in settings. Clock After initializing process, the time will synchronize with your phone’s. SIM Card Status Flashing when starting up or SIM card error. AC Power External power is available. Disarm Stop t

  • BLUGUARD XIMPLE, 11 Setting by smartphone Switch between one/two hands mode One/two hands mode • There are different sizes of smart phones with Android or iOS systems, which bring operational inconvenience for users. • We bring convenience by offering one/two hands modes for both small sizes phones (3.5 inches including under) and big sizes phones and tablet PC (4 inches including above) • It’s one good case to show Archtron® ’s principle: make every effort to minimum users’ operative difficulty. One Hand Mode Two Hands Mode

  • BLUGUARD XIMPLE, 16 Manage and operate XIMPLE Sight IP Camera 2/3 • Move: Watch by dragging on the screen or tapping Move button and control with joystick. • SnapShot: Snapshot the current screen and save it to phone album. • Sound: Listen to the sound around XIMPLE Sight. • Talk: Talk while tapping and it plays immediately via camera speaker. SYNC with phone’s timezone: SYNC with phone’s timezone. Synchronize the timezone with your phone’s Wi Setting: Connect IP camera wirelessly . Format your SD card: Erase and make your SD card recordable. View Record Video: List all the recorded video on your SD card, can be sorted by date. Click to play. Motion De

  • BLUGUARD XIMPLE, 3 Get ready and power on Insert sim card and connect the power cable Power ON • On the back of the panel, open the battery cover, you will see a slot for your SIM Card. Insert the Sim Card and connect the power cable. For those micro or nano SIM cards, please use sim adapter to fit the card slot. • Flip the switch on the back of the panel to the ON position. Replace the battery cover. Wait 20 seconds as the system runs a start-up diagnostic with a welcome screen. • You will hear a confirmati

  • BLUGUARD XIMPLE, 9 Setting by smartphone Add a new XIMPLE 1/2 • XIMPLE App is a great tool to control XIMPLE. XIMPLE should be added to XIMPLE App before using, which we call binding. One XIMPLE App can handle more than one XIMPLE. The phone number of XIMPLE and the password would be asked during binding. Different role has its default password. Administrator: General operations and advanced settings are available. User: General operations only. • The beginners will get kindly reminder, which could help them through the settings step by step. • XIMPLE App supports renaming for the main panel, which is

  • BLUGUARD XIMPLE, 24 Appendix2: XIMPLE Sight settings 2/3 Connect XIMPLE Sight to wireless network • The SSID will be automatically filled as your phone’s , please type in the password and tap [Confirm]. • Unplug the LAN cable, restart your XIMPLE Sight by plugging out/in the power cable. • If you saved the wrong password and restarted the XIMPLE Sight, please reconnect it by LAN again, then repeat the setting process above. Use SD card for video recording • If the SD card is new or needs to be erased, please tap [Format your SD card] to make it available for recording. • Switch on [Motion Detect Record] to r

  • BLUGUARD XIMPLE, XIMPLE Wireless Alarm Designed for home and business security . Easy to setup and use with XIMPLE App. Bluguard Series Products User Manual Perfectly match all Android and iOS smart phones. World famous expert of smart-home alarm system User Manual

  • BLUGUARD XIMPLE, 26 Appendix3:Product specification lists • Wireless range 100 meter / 328 feet, free air • CPU ARM7 Cortex™-M3 72MHz • Internal Flash STM32F103VCT6 256K • External Flash 64M • Working voltage and current 5V/2A • Transmission Frequency 433 MHz±0.5MHz • GSM Mode 850/900/1800/1900 MHz quad-band • Numbers of supported sensors 99 Sensors, like Wireless Siren, Wireless Motion Sensors, Wireless Contact Sensors, etc. • Battery Life 24 hours (In Lab) • Access level of users Admin, User • Event log Latest 60 logs • Managing & Setting SMS, XIMPLE A

Related Products and Documents (Security System):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Amphony L1520 Product information amphony/l1520-OTN.pdf 10 Jul 2023 4 0.34 Mb
2 ASROCK ALIVE NFG-DVI Operation & user’s manual asrock/alive-nfg-dvi-K88.pdf 27 Jul 2022 49 0.98 Mb
3 GE ABS45DFBS Installation instructions ge/abs45dfbs-258.pdf 09 Feb 2024 1 0.28 Mb
4 Dipol K1650 Operation & user’s manual dipol/k1650-3ND.pdf 28 Nov 2023 42
5 Rolls MX44 Pro Quick start manual rolls/mx44-pro-D39.pdf 30 May 2023 2
6 Kenmore 106.6093 Use & care manual kenmore/106-6093-H89.pdf 01 Jul 2023 60

Similar Resources:

  • Htzsafe

    805A

    (12 pages)
    1Wireless Alarm SystemUser Manual1. System Components And Usage Note:1.The alarm system has been programmed already,please operate the system according to the part 2 of the manual;2.If you want to add additional HTZSAFE sensors to the system,please operate the system according to the part 3 of the manual or contact us [email protected])After-sa …
  • Renault

    LOGAN 3998

    (94 pages)
    399806DE2014A 29/06/2004 1/20FManuel pour l’utilisateurDBenutzerhandbuchGBUser manualNLGebruikershandleidingGR IManuale utenteCZNávod pro uivateleHHasználati kézikönyvPManual de usoPLInstrukcja obs³ugiEManual del usarioSLNavodila za uporabnikaTRKullaným kýlavuzuRUSÈíñòðóêöèÿ ïî çêñï� …
  • Fortin

    EVO-ONE

    (9 pages)
    WARNINGATTENTIONA11OFFNON* HOOD PINHOOD STATUS : THE HOOD PIN SWITCH (INCLUDED)MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF. CONTACTDE CAPOTSECURITY STICKERAUTOCOLLANT DE SÉCURITÉMANDATORY INSTALL | INSTALLATION OBLIGATOIRENotice: the installation of safety elements are mandatory. The hood pin and …
  • Kidde

    KN-COEG-3 (900-01 13)

    (22 pages)
    Manual P/N 820-1557 Rev. B 01/10 2509-7214-01ATTENTION: Please take a few minutes to thoroughly read thisuser’s guide which should be saved for future reference andpassed on to any subsequent owner.Carbon Monoxide andExplosive Gas AlarmUser’s GuideModel: KN-COEG-3 (900-0113)• 120V AC • 9V Battery Backup • Peak Level MemoryKN-COEG-3with …
  • KEYKING

    FPC2001

    (20 pages)
    User Manual Thank you for purchasing Keyking products. Please read this manual thoroughly before using. FPC2001 Biometric Reader (Standalone, Narrow) KEYKING GROUP …
  • Leitronic AG

    EasyAlarm HOME

    (40 pages)
    2 September 2010Issue No.: 8.38EA8-HOME868-8-41-GB.docSmokeMotiondetectorWireless sensorsMagnetRepeater /contact ConcentratorAlarmTelecommand Key Emergency buttonLEITRONIC AGSwiss Security SystemsHOME SECURITYUse instructionEasyAlarm HOME®Motion detectorDIN I/O ModuleSiren- or remoteswitchWiredcomponents …

Comments, Questions and Opinions: