Audiolab 8300CD User Instructions

Text of Audiolab 8300CD User Guide:

• Audiolab 8300CD, one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. Use only with the cart, stand, tripod, bracket, or table specified by the ma

• Audiolab 8300CD, • Automatic standby on-off switching of connected equipment via 12V trigger output. • Analogue output level selectable between fixed and variable. • Three display brightness levels with on/off options. • Auto standby function with on/off options. Note: The 8300CD should be used with the variable outputs connected directly to a power amplifier. If there are gain controls on the power amplifiers, set them to maximum and leave them there. Use the volume control on the 8300CD exclusively to alter the level. If you wish to connect the outputs of 8300CD int

• Audiolab 8300CD, 4: Remote Handset Page 4 NOTE: the handset buttons shown crossed out are for use with other Audiolab units and are not operational when used with the 8300CD 1 STANDBY Press to bring the unit in/out of Standby 2 STORE Press to store a track in Program mode 3 FILTER Select a digital filter 4 MENU Press to enter menu mode 5 Move to the next track of CD/USB 6 VOL– Decrease Volume 7 Press and hold to Fast Forward 8 Press and hold to Fast Reverse 9 DISPLAY Press to cycle through the display brightness levels 10 INFO Press to toggle track name or artist name 11 Press

• Audiolab 8300CD, USB Port Use a certified USB2.0 cable, connect the cable to 8300CD and then to the USB port on the digital source. If the media player on your computer features stereo and multichannel output set the output of the media player to stereo. AES/EBU input Professional digital studios input that accepts up to 192kHz 12V Trigger Connectors A trigger circuit is a “daisy chain” in which one unified command from the master unit (8300CD) can bring all the connected “slave” units into or out of standby.

• Audiolab 8300CD, 6: Operation - 1 Page 6 Loading a Disc Insert one CD into the slot. The disc information will now display. After reading the track information the disc will stop. Playing a Disc Press to play a disc. Press to pause a disc, press again to resume play Press to stop the disc Press to eject the disc Next/Previous Track Press to move to the next track. Press to once to replay the current track. Press / repeatedly to move through the tracks forward or back on track at a time. If you exceed the number of tracks on the disc, the player will wrap round and pla

• Audiolab 8300CD, Page 7 6: Operation - 2 Info Display Repeatedly press the INFO key on remote to show Artist and Title. When playing a disc the player remembers the last INFO display mode set. If you switch to another input and then back to CD mode, the player recalls the last used state and plays from the point at which you changed inputs. The info feature requires disc support and can be enabled/disabled in the menu. See page 9. Selecting a Digital Input Source Press the DIGITAL keys on the handset or the SEL buttons on the front panel to select a digital input. When the input is locked, the front panel will display the input source frequency. If the input display read

• Audiolab 8300CD, Page 8 6: Operation - 2 Playing a USB input Install the Audiolab Audio Driver from the CD-ROM provided as accessory. The installation instructions are burnt on the CD-ROM, please refer to the file when installing the software. Connect your computer to 8300CD via USB cable (type A to Type B), change the Play mode to USB input using the handset or the button on the front panel. “Unlocked” will be displayed if no input signal for USB. The Play with digital inputs will lock onto the input data when there is an input signal for USB. The display s

• Page 9 7: The Menu The menu enables you to customize the unit and optimize the interface with other equipment in your system. 8300CD has 14 different menu pages. Press MENU key to enter menu mode, and then press or to turn to different menu pages, press to enter any menu page, press or again to select different setting, press again to confirm chosen setting and exit the menu mode

• Page 10 8: Warranty Audiolab Ltd. warrants this product, subject to the terms and conditions below, to be free from defects in materials and workmanship. During the warranty period Audiolab will repair or replace (at Audiolab’ s option) this product, or any defective part in this product, if it is found to be defective due to faulty materials, workmanship or f

• Audiolab 8300CD, 9: Specifications (Measurement made with 230V power supply) Output Voltage 4.2Vrms ±0.1 (Balanced) 2.1Vrms ±0.1 (Unbalanced) Output Impedance 10Ω Total Harmonic Distortion (THD) <0.002% (1kHz, 0dB, 20Hz ~ 20kHz, A weighted) Frequency Response 20Hz - 20kHz (± 0.2dB) Signal to Noise Ratio (S/N) <-100dB A Weighted (Balanced) <-98dB A Weighted (Unbalanced) Dyanmic Range (A Weighted) >100dB (Balanced) >98dB (Unbalanced) Crosstalk (@1kHz) <-130dB (Balanced) <-120dB (Unbalanced) Standby Power Consumption <0.5W Power Requirements 240V ~ 50 - 60Hz 230V ~ 50 - 60Hz 115V ~ 50 - 60Hz 100V ~ 50 - 60Hz Dimension(mm) (W x H x D) 444 X 80 X 317 Carton size(mm) (

Related Products and Documents (CD Player):

Comparable Devices:

Similar Resources:

• Yamaha CDC-98 (16 pages) IMPORTANT!Please record the serial number of thisunit in the space below.Model:Serial No.:The serial number is located on the rearof the unit.Retain this Owner’s Manual in a safeplace for future reference.WARNINGTO REDUCE THE RISK OF FIRE ORELECTRIC SHOCK, DO NOT EXPOSETHIS UNIT TO RAIN OR MOISTURE.RISK OF ELECTRIC SHOCKDO NOT OPENCAUTION: TO REDUCE THE R …

• Sony HCD-F250AV - Compact Disc Receiver System (82 pages) HCD-F250AVUS ModelCanadian ModelSERVICE MANUALMINI HI-FI COMPONENT SYSTEMMICROFILMManufactured under license from Dolby LaboratoriesLicensing Corporation.“DOLBY” and the double-D symbol a and “PROLOGIC” are trademarks of Dolby LaboratoriesLicensing Corporation.• HCD-F250AV is the tuner, deck,CD and amplifier section in MHC-F250AV.U.S and foreign pa …

• Kenwood DPF-1030 (13 pages) COMPACT DISC PLAYERDPF-1030/1030E/1030-SDPF-2030/2030E/2030-SSERVICE MANUAL© 2000-3/B51-5603-00 (K/K) 2100KENWOOD-Corp. certifies this equipment conforms to DHHSRegulations No. 21 CFR 1040. 10, Chapter 1, Subchapter J.DANGER : Laser radiation when open and interlock defeated. AVOID DIRECT EXPOSURE TO BEAM.In compliance with Federal Regulations, following ar …

• Kenwood KDC-X879 (64 pages) KDC-X979KDC-MP925KDC-X879CD-RECEIVERINSTRUCTION MANUAL© B64-2741-00/00 (KV)Take the time to read through this instruction manual.Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver.For your recordsRecord the serial number, found on the back of the unit, in the spaces designated on the wa …

• Tascam CD-160 (2 pages) Technical DocumentationCD-160TASCAM's CD-160 is a cost-effective, rack mountableCD player. The Auto Cue function will set the CD-160at the "first audio" in a track, offering faster start time on tracks with longer lead-ins. Pitch control is standard, allowing minor tuning adjustment or a bump in the feel of the track. Also, a +10 track incr …

• Philips EXP2561/17B (2 pages) User manualManuel d'utilisationManual del usuarioMeet Philips at the Internethttp://www.usasupport.philips.comor call 1-888-philips (744-5477)PHILIPS CONSUMER ELECTRONICS COMPANYMarietta, GA 30006-00261. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean onl …

Comments, Questions and Opinions: