Manualios.com

Audionet ART G3 Operation & User’s Manual

Audionet ART G3 Manual Online:

3.6, 1591 votes
Audionet ART G3 User Manual
Audionet ART G3 User Guide
Audionet ART G3 Online Manual

Text of Audionet ART G3 User Guide:

  • Audionet ART G3, 3 Contents 1 Preface ....................................................................... 5 1.1 Included ....................................................................................... 6 1.2 Transport..................................................................................... 6 2 Overview front panel ................................................ 7 3 Overview back panel ................................................ 8 4 Installation and power supply .................

  • Audionet ART G3, 13 5.2 Output/Inputs 'Digital Audio' 9 Digital output OUT 1 (SPDIF) The digital audio signal is available at the output OUT 1 in the SPDIF format depending on the setting of option Set Digital Output Mode (refer to sections 'Digital output format' on page 14 and 'Set Digital Output Mode' on page 48). 10 Digital output OUT 2 (SPDIF) The digital audio signal is available at the output OUT 2 in the SPDIF format depending on the setting of option Set Digital Output Mode (refer to sections 'Digital output format' on page 14 and 'Set Digital Output Mode' on page 48). 11 Di

  • Audionet ART G3, 39 one Track T ime Track min sec ► 09 08 : 26 ► Playback Opt ions ◄ Set Random Playback: enabled Note · If you compiled a playlist, not the whole disc but only the tracks of the playlist are repeated. · You may switch on/off the repeat function before and during play- back. · In case you activated the disc repeat and the random play function, all tracks are played back in random order until every track was played once. Then the playback re-starts with a randomly chosen track. 9.2.2

  • Audionet ART G3, 26 Note · If you open the cover during playback the ART G3 takes a short moment to bring the disc to a complete stop. Please wait until the disc stops turning before you remove the disc. · The cover has to be closed completely in order to playback a disc. · Always use the included stabilizer to fix the disc on the spindle. Oth- erwise the disc and/or the unit might suffer damage. · Never load more than one disc at a time, and never use any additional stabilizers! · Do not use any non-standard s

  • 50 10.4 Set AutoOff To adjust the automatic shut-off feature of the ART G3 press key stop / set long for 4 times. Use keys back / pause and skip / play to select the preferred function. never auto shut off The automatic shut-off feature is deac- tivated. The ART G3 stays switched on until it is switched off by the power key on the front panel, the remote control or the Audio

  • Audionet ART G3, 22 · If you switch off your Audionet chain using Audionet Link, it is im- portant to wait until all devices are shut down before you restart the system. Important · In case the option Set AutoOff is set to shut off in 30 min, the ART G3 shuts down to stand-by mode automatically, if the disc is stopped or no disc inserted and no key of the front panel or remote control is used for at least 30 minutes. This function works independ- ently from a preamplifier that is connected via Audionet Link, i.e. the ART G3 shuts down automatically even if the preamplifier is still switc

  • 8 3 Overview back panel 1 Audionet Link input 2 Audionet Link output 1 3 Audionet Link output 2 4 Analog output Right (RCA) 5 Analog output Right (balanced) 6 Analog output Left (balanced) 7 Analog output Left (RCA) 8 Input for external power supply Audionet EPS 9 Digital outp

  • Audionet ART G3, 49 10.3 Set Display Brightness To adjust the brightness of the display of the ART G3 press key stop / set long 3 times. Use keys back / pause and skip / play to adjust the bright- ness. Important · Long-term usage of the display set to maximum brightness (set- ting 100%) may cause extended signs of wear resulting in a decay of contrast or brightness of individual dots in the display. Do not use the display with a brightness set higher than the factory de- fault setting of 50% over a longer period of time. Note · Is the brightness set to Off the display is only on during setup ad- justments and will switch off several seconds after the last entry. The same applies f

  • Audionet ART G3, 9 4 Installation and power supply Important · During connecting or removing the ART G3 to/from a preampli- fier both units and the corresponding power amplifiers have to be switched off to prevent damage of the ART G3 or any of the other connected units. · Please make sure that all cables are in absolute best conditions! Broken shields or short-cut cables could damage the ART G3 and/or any other connected unit. 4.1 Placement Important · It is recommended to place the ART G3 into a high quality rack or onto a stable table. · Do not expose the unit to direct sunlight. · Do not place the ART G3 in close range

  • Audionet ART G3, 54 Finish Front: brushed aluminium, 10 mm, black anodised, white print or aluminium 'nature', 10 mm, anodised, black print Display: red or blue Top: MDF, Nextel coated Cover: aluminium, black anodised Chassis: granite, steel, black Features - Audionet Metal Remote Control RC 1 (included) - D/A converter with USB/SPDIF digital input - Top loader, absorbing MDF, aluminium and granite casing - massive disc drawer cover made of 10 mm alumin- ium, Teflon-bedded - decoupling of the transport unit by Audionet Aligned Resonance technology - special stabilizer made of POM - separate power supplies for digital and analog sec

  • Audionet ART G3, 7 2 Overview front panel power key stop / set key IR remote control receiver back / pa u se key skip / play key Display

  • Audionet ART G3, 21 5.5 Audionet Link 1 Control input IN Audionet Link control input 2 Control output OUT 1 Audionet Link control output 1 3 Control output OUT 2 Audionet Link control output 2 (time-delayed in reference to control output OUT 1) For your convenience, the ART G3 can be controlled remotely by one of Audionet's pre- or integrated amplifiers using the 'Audionet Link' inter- face. You only need a simple optical Toslink cable to connect the Audionet Link output of your Audionet preamplifier to the Audionet Link input 1 of the ART G3. Now,

  • Audionet ART G3, 5 1 Preface The Audionet Team congratulates you on your purchase of this unit. The predecessor model ART G2 is considered to be one of the best- sounding CD players ever made, boasting unique acoustic and design characteristics that convinced music-lovers around the world. An impres- sive list of test victories, distinctions, and awards testifies to the long and triumphant reign of the ART G2. Curtain call for the third generation of CD player: the new ART G3 (Generation 3) is nothing less than Audionet’s final statement for repro- du

  • 14 input for connecting CD players, DAT recorders etc. (refer to section 'USB/SPDIF digital audio input' on page 16). 16 Digital input IN 2 (optical/TOSLink) Audio input to connect digital devices (CD-Players, DAT recorders etc) via optical fibre cable. This input is also available for the usage of the D/A-converter. 5.3 Digital output formats Impor

  • 34 8.2 Basic playback control The table below comprises the basic playback functions into a simple overview. The advanced functions are explained in detail in the following sections. Key Function skip/play or ► / ; (short) Start / resume playback. back/pause (long) or ► / ; (long) Pause playback. stop/set (short) or < Stop playback. 7 Search bac

  • Audionet ART G3, 29 Playback Options menu (see section 'Playback Options menu' on page 36). 5 Setup key ä enters and navigates through the Global Setup and Playback Op- tions menu (see section 'Setup menu Global Setup' on page 46 and 'Playback Options menu' on page 36). This key works similar to the set key on the front panel. 6 Stop key < stops playback (see section 'Basic playback control' on page 34) and deletes playlists (see section 'Delete a playlist' on page 45). 7 Search backwards key 7 searches disc backwards (see section 'Searching

  • Audionet ART G3, 47 · If you adjust an option of the Global Setup menu during playback, pressing key stop / set shortly (less than 2 seconds) will still stop playback (refer to section 'Playing discs' on page 32). · If you make no adjustments for longer than 12 seconds the ART G3 will leave the Global Setup menu automatically. · During adjustments of the display brightness is set to 100% for better readability. After leaving the menu the user selected brightness level will be restored. · If you switch off the unit to stand-by mode all adjustments will be stored in t

  • Audionet ART G3, 37 Track R e main Track min sec ► 05 -03 : 08 Total R e main Track min sec ► 05 -42 : 36 Track Time Track min sec ► 05 02 : 49 ► Playback Options ◄ Set Time Display: Track Time 9.1 Time Display During playback of a disc 4 different time display modes are available. Press the key ä of the Audionet Metal Remote Control RC 1 once to get to the Playback Options menu. The first item is Set Time Display. Use keys 9 and : to select desired display mode. There are 4 time display mo

  • 4 8 Playing discs .......................................................... 32 8.1 Playable disc types .................................................................... 32 8.2 Basic playback control ............................................................. 34 8.3 Searching ................................................................................... 35 9 P

  • Audionet ART G3, 30 7.2 Changing the batteries In order to exchange the batteries of your Audionet Metal Remote Con- trol RC 1, first you have to remove the 6 Phillips head screws on the bot- tom side. The battery compartment is to the left side of the circuit board. You need 2 batteries type 'AAA' or 'Micro' with a voltage of 1.5V. Important · While inserting the batteries please mind their orientation. The cor- rect orientation is printed onto the bottom of the battery compart- ment. 7.3 Settings for Audionet preamplifier Th

  • Audionet ART G3, 24 6.1.1 Mains phase detection The correct polarization of mains is important for reasons of audio clarity and stability. Please align the mains cord so that the hot pin of the wall outlet is connected to the pin of mains input 12 marked 'PHASE' 13 on the back panel of the unit. The ART G3 recognizes the incorrect polariza- tion of the mains plug automatically. Right after switching on the unit from stand-by mode by pressing the power key on the front panel the following message will appear in the display in case the mains polariza- tion is incorrect: ► A

  • Audionet ART G3, 46 10 Setup menu Global Setup If you hold key stop / set on the front panel for longer than 2 seconds, you enter the Global Setup menu of the ART G3. Press and hold key stop / set for longer than 2 seconds again to advance to the next menu item. After the last option you leave the menu. To adjust an option use keys back / pause and skip / play. Order of options in the Global Setup menu: ê *1 Set SPDIF Digital Input ê Set Digital Output Mode ê Set Display Brightness ê Set AutoOff ê Set AutoPlay

  • Audionet ART G3, 35 Track Time Track min sec ►►► 16 04 : 27 Search direction and search speed: uu forwards, slow speed uuu forwards, medium speed uuuu forwards, high speed tt backwards, slow speed ttt backwards, medium speed tttt backwards, high speed 8.3 Searching You can search discs forward and backwards with several speeds. 1. During playback press 7 or 8 to start the search mode. 2. Press the key again to increase search speed. 3. Press key play or ► / ; to continue normal playback. Both search direction and search speed are shown in the display: Note · To start searching the disc has to be in playback or pause mode

  • Audionet ART G3, 12 4 5 6 7 5 Outputs and inputs Important · During connecting or removing the ART G3 to/from a preampli- fier both units and the corresponding power amplifiers have to be switched off to prevent damage of the ART G3 or any of the other connected units. · Please make sure that all cables are in absolute best conditions! Broken shields or short-cut cables could damage the ART G3 and/or any other connected units. 5.1 Outputs 'Analog Audio' 4 RIGHT analog audio output of right channel (RCA) 5 XLR RIGHT analog audio output of right channel (balanced / XLR) 6 XLR LEFT analog audio output of left cha

  • Audionet ART G3, 16 5.4 USB/SPDIF digital audio input 5.4.1 Connecting the computer to the USB audio input With the USB Audio interface you can playback music and sound files from your computer (PC) using the sophisticated digital-to-analog con- verters of the ART G3 instead of the soundcard of the PC. The ART G3 is integrated into your computer system as USB Audio device. The instal- lation is done (mostly) automatically via Plug'n'Play, provided a correctly installed operating system. Note · To

  • Audionet ART G3, 27 7 Audionet Metal Remote Control Every function of the ART G3 is accessible via the Audionet Metal Re- mote Control RC 1. Additionally, you are able to control power on/off, volume, muting and input channel selection of an Audionet preamplifier. audionet RC 1 ART PRE 4 / ; < ä : 9 7 8 + + – – CH VOL POWER 1 2 3 4 5 6 7 8 9 10 11 14

  • Audionet ART G3, 41 u Edit Program t Track 02 ž 19 of 19 Prog. Time: 47 min 13 sec Add Track: 07 47 minutes and 53 seconds completely. Acknowledge your entry by pressing key ► / ;. Playback starts / continues at 47 minutes and 53 seconds. Note · If you enter a time that is not on the disc the number of the corre- sponding track is 00 in the display. If you press now 4/; to start / continue playback the ART G3 issues the warning u Time out of range! t to let you know that the entered time is not available on the disc. · Correct a wrong time entry by simply typing in the correct time. The current selected digit is always the

  • Audionet ART G3, 40 u Time Search t Track min sec 12 u47 : 53t Random Track Time Track min sec ► 05 02 : 49 Use keys 9 and : to enabled or disable the Random Playback func- tion. If Random Playback is enabled, the display will show an active random playback mode by the symbol Random: The symbol Random will be removed from the display if Random Play- back is disabled. Note · If you compiled a playlist, only the tracks of the playlist will be played back in a

  • 42 u Edit Program t Track 02 ž 05 of 16 Prog. Time: 47 min 13 sec Add Track: 07 u Program Play Options t edit -> press 7 disable - > press < Line 2 of the display proves now that the track was added successfully to the playlist: The total number of program steps was increased by one. Now add all other track

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Gigabyte D1325 Quick installation manual gigabyte/d1325-KP9.pdf 04 Oct 2022 5
2 APconnections NetEqualizer Operation & user’s manual apconnections/netequalizer-3A2.pdf 27 Jun 2023 97
3 Samsung AWH090ZE0K Service manual samsung/awh090ze0k-PQE.pdf 04 Jul 2022 19
4 VPC SL4 Operation & user’s manual vpc/sl4-I4Q.pdf 24 Feb 2024 10 1.22 Mb
5 GE JGRP20 Dimension manual ge/jgrp20-SGM.pdf 24 Dec 2022 2 0.05 Mb
6 Work Pro PA 50 Operation & user’s manual work-pro/pa-50-F86.pdf 11 Apr 2023 9

Similar Resources:

  • Kenwood

    KDC-C665

    (14 pages)
    CD AUTO CHANGERKDC-C665/Y© 1999-12 PRINTED IN JAPANB51-7554-00(S) 3444SERVICE MANUALThe MECHANISM OPERATION DESCRIPTION is same as model KDC-C660.Please refer to the service manual of model KDC-C660 (B51-7105-00).Cord with plug(E30-4138-05)Holder assy(MAGAZINE)(J19-4687-32)*For K•E typeScrew set(N99-1645-15)Bracket (R)(J19-4715-13)Panel(A64-2002-01)Dress …
  • Sony

    CDX-434RF - Compact Disc Changer System

    (2 pages)
    262000 MOBILE PRODUCT GUIDE – PART 1CDX-434RFRF CD Changer Package• Slim-Line Wired Commander• CD Play/Pause, Search, Disc/Track Select• 9 RF Frequency Selector• 5 RF Output Level Selector• 8x Oversampling• 1-Bit Pulse D/A Converter• Active Servo Control, CD-R Compatibility†• Fast Change 10 CD MechanismGeneralInput/Output TerminalsCurrent …
  • Sharp

    MD-MT15H

    (48 pages)
    DEUTSCHFRANÇAISESPAÑOLSVENSKAITALIANONEDERLANDSENGLISHPORTABLER MINI-DISC RECORDERLECTEUR-ENREGISTREUR MINIDISC PORTABLEGRABADOR/REPRODUCTOR MINIDISC PORTÁTILBÄRBAR MINISKIVINSPELAREREGISTRATORE DI MINIDISCHI PORTATILEDRAAGBARE MINIDISC RECORDERPORTABLE MINIDISC RECORDERMODELL MODELLOMODÈLE MODELMODELO MODELMODELLMD-MT15HBEDIENUNGSANLEITUNG MANUALE DI I …
  • SOUNDMASTER

    SCD5950SW

    (11 pages)
    DEUTSCH ESPANOL ENGLISH SLOVENSKÝ FRANÇAIS POLSKI NEDERLANDS ČEŠTINA ITALIANO SCD5950 Hersteller Wörlein GmbH Tel.: +49 9103/71670 Gewerbestrasse 12 Fax.: +49 9103/716712 D 90556 Cadolzburg Email. [email protected] GERMANY Web: www.woerlein.com …
  • Audiovox

    CE215

    (12 pages)
    ~~:~~~~I RISK ~ ~~ SHOCK IThe lightning flash and WARNING: TO REDUCETHE RISK OF[arrowhead within theI ELECTRIC SHOCK, 00 NOT REMOVE\triangle is a warning sign COVER (OR BACK) NO USER-alerting you of "dangerous SERVICEABLE PARTS INSIDE.voltage" inside the product. REFER SERVICING TO OUALIFIEDSERVICE PERSONNELI T …
  • Sony

    CDX-M670 - Fm/am Compact Disc Player

    (108 pages)
    Operating Instructions Mode d’emploi Manual de instrucciones Owner’s RecordThe model and serial numbers are located on the bottom of the unit.Record these numbers in the space provided below.Refer to these numbers whenever you call upon your Sony dealer regarding this product.Model No. CDX-M770/M670/M620 Serial No. …

Comments, Questions and Opinions: