Manualios.com

Avonic CM50-IP Operation & User’s Manual

Avonic CM50-IP Manual Online:

4.15, 1132 votes
Avonic CM50-IP User Manual
Avonic CM50-IP User Guide
Avonic CM50-IP Online Manual

Text of Avonic CM50-IP User Guide:

  • 13 Main Unit 1. Audio LINE IN Interface 7. Network Interface 2. CVBS Interface 8. HDMI Interface 3. System select switch 9. HD-SDI Interface 4. RS485 jack 10. USB2.0 5. RS232 IN jack 11. DC 12V jack 6. RS232 OUT jack 12. Power switch

  • Avonic CM50-IP, 18 USE IR Remote Controller When the camera is working, you can use remote controller to perform panning, tilting, zooming and focusing, store and call back preset positions. Button Instruction: 1. In this instruction, ‘press the button’ means the press and relax the two actions. Such as ‘press [HOME] button’ means to press the [HOME] key and then relax action, and a special note will be given if a hold down for more than one second is required. 2. When a button-combination is required, do it in sequence. For example, ‘[*] + [#] + [F1]’means press [*] first and then press [#

  • Avonic CM50-IP, 15 IR Remote Controller Explanation 0. Standby Button Press this button to enter standby mode. Press it again to enter normal mode. (Note: Power consumption in standby mode is approximately half of the normal mode) 1. Position Buttons To set preset or call preset 2. * Button 3. Set/Clear Preset Buttons Set preset: Store a preset position [SET PRESET] + Numeric button (0-9): Setting a corresponding numeric key preset position Clear preset: Erase a preset position [CLEAR PRESET] + Numeric button (0-9) Or: [*]+[#]+[CLEAR PRESET]: Erase all the preset individually 4. BLC (Backl

  • Avonic CM50-IP, 5 Supplied Accessories When you unpack, check that all the supplied accessories are included: Camera ...................................... 1PCS AC power adaptor ..................... 1PCS Power cord .................................. 1PCS RS232 cable ................................ 1PCS Remote controller ........................ 1PCS User manual .............................. 1PCS

  • Avonic CM50-IP, 16 only in auto exposure mode) Note: If a light behind the subject, the subject will become dark. In this case, press the backlight ON / OFF button. To cancel this function, press the backlight ON / OFF button. 5. Focus Buttons Used for focus adjustment. Press [AUTO] adjust the focuses on the center of the object automatically. To adjust the focus manually, press the [MANUAL] button, and adjust it with [Focus+] (Focus on far object) and [Focus-] (Focus on near object) 6. Camera Select Buttons Press the

  • Avonic CM50-IP, 43 Copyright Notice All contents of this manual, whose copyright belongs to our Corporation. Cannot be cloned, copied or translated without the permission of the company. Product specifications and information which were referred to in this document are for reference only, and the content will be updated at any time without prior notice 2015/4

  • Avonic CM50-IP, 37 image will be, more network bandwidth will be taken. 5) Bit Rate User can assign bit flow/stream, normally speaking, the bigger bit flow is, the clearer the image will be. The bit allocation must combine with network bandwidth, when the network bandwidth is too narrow and the allocated bit flow is too big, will cause video signal flow not to be transmitted normally, the video effect will be worse. 6) Maximum frame rate User can specify the size of the frame rate, generally, the frame rate greater, the image more smooth; Frame rate is smaller, the more sense of beating. 7)

  • 11 Main stream resolution 1920X1080,1280X720 Sub stream resolution 720X480,320X240 Bit Rate 128K,256K,384K,512K,768K,1024K,1536K,2048K,3072K,4096K,5120K,6144K,8192K Optional, customize Bit Rate Type Variable rate, fixed rate Audio standard AAC Audio rate 96K,128K,256k Support protocols TCP/IP,HTTP,DDNS,RTSP,PPPoE,SMTP,UPnP, SNMP,F

  • Avonic CM50-IP, 24 Serial Communication Control In default working mode, the camera is able to connect to a VISCA controller with RS232C serial interface.  RS232 Communication Control The camera can be controlled via RS232 ,the parameters of RS232C are as follows: Baud rate: 2400/4800/9600 bit/s. Start bit: 1 bit. Data bit: 8 bits. Stop bit: 1bit. Parity bit: none.  RS485 Communication Control The camera can be controlled via RS485, Half-duplex mode: Baud rate: 2400/4800/9600 bit/s. Start bit: 1 bit. Data bit: 8 bits. Stop bit: 1bit. Parity bit: none. Pan-Tilt will rotate to the maximum position of to

  • 3 Note  Electric Safety Installation and operation must accord with electric safety standard.  Caution to transport Avoid stress, vibration and soakage in transport, storage and installation.  Polarity of power supply The power supply of the product is +12V, the max electrical current is 2A .Polarity of the power supply plug drawing as fol

  • Avonic CM50-IP, 9 Features 1. The camera provides a high performance in low illumination situations, particularly suitable for which room's lighting is not very well. 2. With maximum resolution of 1920 x 1080 and output frame rate up to 30 frames / sec, this camera provides high-definition as well as fluent video. 3. The camera video signal to noise ratio directly affects the image compression coding efficiency for high-definition video conference terminals. The camera applies 2D and 3D noise reduction at the same time based on motion estimation algorithm, and effectively reduces the noise. 4. 2

  • Avonic CM50-IP, 25 VISCA Command List (Ignore) Note: The camera serial standard VISCA/Pelco-D/Pelco-P, if the need for the secondary development, According to standard protocol to control the camera. If you need VISCA/Pelco - D/Pelco - P protocol command list in detail, please contact the manufacturer.

  • Avonic CM50-IP, 27 mode) Backlight: Set the backlight compensation, Optional items: On, Off (Effective only in Auto mode ) DRC: DRC strength, Optional items: 0 ~ 8. Bright: Intensity control, Optional items:00~17. (Effective only in Bright mode) Anti-Flicker Flicker: Anti-flicker. Optional items: Off, 50Hz, 60Hz (Effective only in Auto, Bright mode) Iris: Aperture value. Optional items: F1.8, F2.0,F2.4,F2.8,F3.4,F4.0,F4.8,F5.6,F6.8,F8.0,F9.6,F 11.0,Close(Effective only in Manual, AAE mode) Shutt: Shutter value

  • Avonic CM50-IP, 41 Maintenance and Troubleshooting Camera Maintains  If camera will not be used for a long time, please turn off the power switch, disconnect AC power cord of AC adaptor to the outlet.  Use soft cloth or tissue to clean the camera cover.  Please use the soft dry cloth to clean the lens. If the camera is very dirty, clean it with diluted neuter detergent. Do not use any type of solvents, which may damages the surface. Unqualified Application  No shooting extreme bright object for a long period of time, such as sunlig

  • Avonic CM50-IP, 42  IE browser not video image IE When IPC first time accessed by Internet Explore (IE or other web browser),must install plug-in. User first time use this camera by internet (only for new user), must install a player software (VLC). Please go to VLC webside http://www.videolan.org/vlc,download and Install VLC (player software). After installation,login again, will show image, the video image is displayed.  Unable to access IP Camera by IE browser. 1. Access to the network with PC can test whether network works, in this way to get rid o

  • 30 Chinese Protocol: Control protocol type. Optional items: AUTO, VISCA, PELCO-D, PELCO-P V_Address: Protocol address, To be decided according to the agreement, AUTO, VISCA protocol Optional items: 1 ~ 7 P_D_Address: PELCO-D protocol Optional items: 0 ~ 254 P_P_Address: PELCO-P protocol Optional items: 0 ~ 31 V_AddrFix: If I can change through th

  • Avonic CM50-IP, 35 6. IP Camera parameter setup 1 Homepage introduction Menu All pages include 2 menu bars: Real time monitoring: displaying video image Parameter setup: with function buttons 1.1 Video viewing window Video viewing window must be same as video resolution, the bigger the resolution is, the bigger the playing area is. Double click viewing window, will show full-screen, double click again, will return to initialized size. Status bar in viewing window shown as below 1) Video playback pause button: control real-time video pause, stop the last picture, click recoverable v

Related Products and Documents (IP Camera):

Comparable Devices:

# Manufacturer Model Document Type File Updated Pages Size
1 Frigidaire FRA053XT71 Use & care manual frigidaire/fra053xt71-T7J.pdf 25 Jun 2022 10
2 Laipac S911 Lola Operation manual laipac/s911-lola-7H5.pdf 09 Sep 2023 55
3 Potterton PROMAX 24 Operation & user’s manual potterton/promax-24-69U.pdf 20 Jan 2024 24
4 Sony VGP-BMS80 Operating instructions sony/vgp-bms80-489.pdf 02 Nov 2023 2
5 Leviton DECORA LTB02 Installation instructions leviton/decora-ltb02-W85.pdf 04 Dec 2022 2
6 Akai AMD02 Operation & user’s manual akai/amd02-83E.pdf 19 Dec 2023 27 6.11 Mb

Similar Resources:

  • GeoVision

    GV-CBW120

    (214 pages)
    Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.ICH264-QG-Z-ENQuick Start GuideGV-IP Camera H.264 …
  • Skyrc

    SK-600116-01

    (2 pages)
    INSTRODUCTIONINSTRUCTIONMANUAL600TVL CameraSK-600116SkyRC 600TVL Camera employs 1/3" SONY SUPER HAD II CCD image sensor to ensure fantastic light handing and high definition. The lightweight plastic casing and bracket are tailored for easy mounting. The lens of the camera is changeable. Besides, it allows users to set the parameters and fine tune …
  • Cisco

    Nexus 5596

    (18 pages)
    CHAPTER 4-1Cisco Nexus 5000 Series Hardware Installation Guide 4Replacing ComponentsThis chapter describes how to remove and install components for the Cisco Nexus 5500 Platform switch or the Cisco Nexus 5000 Platform switch.This section includes the following sections:• Replacing an I/O Module for a Cisco Nexus 5548 Switch, page 4-1• Replacing Expansion …
  • DivioTec

    NBR125P

    (2 pages)
    H.265 IP CAMERAQuick Installation GuideNBR125P(IR Bullet Camera)Series V1.0PRECAUTIONS1. OPEN-CASE INSPECTION2. PRODUCT STRUCTURE3. EQUIPMENT INSTALLATION ● Do not use or store the camera in humid environmentIt may cause poor image quality.● Do not use the camera in unstable lighting conditions.Inconsistent lighting or flickering may cause poor image.● …
  • Bea-fon

    FLEXY1F

    (67 pages)
    Smart H meFLEXY1FDeutschS. 2-15EnglishP. 16-28EspañolP. 29-41ItalianoP. 42-54FrançaisP. 55-67beafon_Smarthome_FLEXY 1F_Manual_GESAMT.indd 1beafon_Smarthome_FLEXY 1F_Manual_GESAMT.indd 1 14.12.20 10:2714.12.20 10:27 …
  • Konig

    CMP-NWIPCAM22

    (129 pages)
    CMP-NWIPCAM22 CMP-NWIPCAM31 MANUAL (p. 2) IP Wireless Network Camera ANLEITUNG (S. 11) IP WLAN-Netzwerkkamera MODE D’EMPLOI (p. 20) Caméra à adresse IP de réseau sans fil GEBRUIKSAANWIJZING (p. 29) Draadloze IP-netwerkcamera MANUALE (p. 38) Videocamere di rete IP wi-fi MANUAL DE USO (p. 47) Cámara de Red IP Inalámbrica …

Comments, Questions and Opinions: